191 items for sale

Complete fuel Injection system for Essex V6 which was removed frm a TVR. Air box and throttle body, inlet manifold, injection pump and injectors. Wiring harness probably incomplete.

-Mainly stock EJ205 -about 240,000km -car still regoed, but not approved for mods -very strong motor -headgaskets and heads replaced/remachined about 1200km ago, @japline industries -VF24 turbo from a GC STi -AGI 6pt bolt in rollcage with single side intrusion bars+eye hooks for harnesses -ecu tune -slotted brake rotors -new wheels and tyres 1500km old -new fully adjustable coilovers 1500km old -front strut enhancement bar -turbo back full stainless exhaust -aftermarket BOV -rocker cover gasket

Features :- Reese Goosebox hitch with air bag, suit 2-5/16" ball New Reese 8,000lb dual motor landing legs New 5,000lb electric winch New rubber torsion suspension axles Queen bed Fold out double bed Split system Air Con TV Shower -100lt water tank Gas hot water system Toilet Microwave Pantry 240/12 volt lighting Pull out cradle for 60lt Engel under seats Measurements:- Overall length - 11,350mm Body length - 10,800mm External width - 2,500mm Front section length inside - 4,350mm Rear section le

AP Racing CP3985-230EV x3 brand new, & x1 used, bought for my Nissan GT3 but have now found a set is stainless steel HD version so fitting these instead. Great price, great opportunity, can be collected or i can post.

Original SS camaro race prepared in 2020 by MCE Motorsport including approved roll cage and harnesses chassis improvements and Log booked as 3D Sports sedan/TCM. Eligible for other classes inc Street Cars & Commodore cup etc Brand new eng. installed with upgraded T56 Magnum transmission. Sept. 2021 eng replaced with brand new Chev performance strengthened alloy LS3 6 bolt block, Callies Forged crank and rods, SRP alloy pistons (11.5 comp.) Racetech Balancer, ARP main & rod studs, Crow 1.60 li

Tatum pro Buggy ,7 LT engine , 6 speed Albins sequential, all new engine full rebuild 400 kms old $55k spent on engine and motec system plenty of spares , full set of spare wheels with 3/4 rubber on all 8 wheels, all new power steering system front to back , hoses , rack , and pump . Most of the running gear on the buggy is Trophy truck spec ,hubs , brakes ect . Ring for more info

For Sale Excel race car Current Spec Supashocks suspension Poly bushed Brown Davies State level roll cage Winmax 6.5 brake pads Current Spec Dunlop tyres Sparco Grid 2 race seat Sealed fuel pump Short shifter Fuel Pressure regulator Alloy catch can Whiteline Rear Sway bar Braided Brake Lines 6 Point Harness GoPro mount Battery Box with provision to charge Go Pro Spare set of wheels Some spares Jerry cans Trolley jack Axle stands Spare brake pads (Brand New, 2 sets) Dorian lap timer included in

Abarth Replica; The Fiat 850 Spider was made in October 1972 and sold new in the USA, type 100 GBS1. It was subsequently imported to Australia. Chassis No. is 0125612. The car underwent extensive restoration including a body conversion to a 'covered headlight' and significant mechanical upgrades. The block is 100GBC. The head is a rare PBS 8 port head, pbs inlet manifold, twin 40 DCOE carbs and PBS sump. The car runs a front radiator - Alfa Sud. Interior has been re-upholstered with OMP seats.

2005 Subaru Spec C – PBMS ex-Cody Crocker 2005 ARC Championship-winning car A rare opportunity to own a genuine piece of Australian rally history. Built for Factory Subaru Rally Australia by Possum Bourne Motorsport in New Zealand for Cody Crocker’s 2005 ARC campaign, this car, known as CNC930, dominated almost every round and secured the 2005 Australian Rally Championship. It is one of the most successful Group N rally cars of its era. Cody Crocker described it as “possibly the best Group N

PORSCHE 996/993(964/944) 18 INCH BBS GT3 RIMS IN TOPCONDITION 7,5jx18 et 50 10jx18 et 65 These Nice Rims fitted under a Porsche 996/993 Narrow Body ,and with spacers rear from 10 mm under a Porsche 964 and Porsche Model 2

2800kg GVM with Electric brakes on four wheels - Al-Ko 50mm quick release electric coupling with hand brake 3500kg rated - Checker plate floor, sides and mudguards - Strong welded all around - Cross underneath 300mm gap from each other for extra strength - 1700x100x50mm long drawbar - 2x45mm square solid axle rated 1400kg each with 10 inch electric brake - 7 leaf rocker roller suspension - Tie down points all around - Color Aluminum - Primer zinc rust protection done - 7 pin flat plug, Mud flap

Looking for a competitive, well-maintained, and fully equipped Radical SR3 RS? This 2012 CAMS log-booked SR3 RS has regularly been a frontrunner in the WA State Title. Maintained by Arise Racing. Key Specs & Features: 1500cc RPE Engine – 26 hours Factory Fitted Paddle-Shift System – With Auto-Blipper for seamless shifting Intrax Triple Adjustable Shocks – For precision handling High-Downforce Package – Carbon rear bi-plane wing, front dive planes, front & rear diffuser 280mm Oversize

Built from a very clean & straight white EG Civic using the following quality parts: - 6-point welded roll cage (signed documentation for CAMS approval) - Cage and interior freshly painted - 15x9 front & 15x8 rear 949 Racing 6UL Wheels (Charcoal) - Toyo R888R Tyres (225/50/15) - GAB SSR Series Racing Coilovers - Carbon bonnet, boot & custom door cards - PCI Racing Wing - PCI Side Skirts - ACW Motorsport Plastics polycarbonate window kit (slider in driver's window + rear window vent) - FCS Race F

Service truck. Build to fit in a 40 foot container. Has been used as rally service truck with large roof space for wheels or bumper etc. Good condition with WA rego. Loads of space with lots of shelving and 2 large tool cabinets. Lockers for Jacks, stands etc. Can also be sold with 40 foot container with tie down setup and bench that can also carry one car. Good condition, always been stored inside.

HDT Big Brake kit. Fits inside 19" SSV wheels. Used for approx 500 kms, as new with mounting kit, dog bones etc.

412 cube Nascar sb2.2 engine full dry sump comes with Ignition and fuel system twin carbs headers and converter to suit 2 speed glide. Approximately 25 passes has run a best of 8.39 quarter.

I have for sale some spare parts to suit 6MT Subaru gearboxes. These are all new, never used and in original PPG packaging. They are to suit various Subaru 6 speed Sti type transmissions. All part numbers, prices and quantities available are shown. Please do your own research to make sure these parts will fit your gearbox. They would ideally be suited for someone who has these parts in their gearbox already and could have them in case they are needed. Postage within Australia can be arranged via

Group Nc log booked car with new engine. Currently running 48mm Webers, Cat 311/304 cam, upgraded billet rockers (Cat), Ross race pistons, four speed gear box and matching diff, (spare diff included in the sale). Extra set of wheels also included. Well sorted car that has previously enjoyed success at Wanneroo Raceway and Collie Motorplex. Great way to become involved in Historic Touring Car racing at a reasonable cost.

One of one 2010 Mitsubishi Evo X RS. This car has won every event it has entered and finished in the last 7 years, and holds every stage record. Only 50 brought in to Australia, and only one in this spec. Custom mods list: JUN cams/springs/retainers ARP studs - head and rod bolts Nitto 2.2 stroker kit with billet crank I-beam rods, forged pistons Nitto head gasket Extended custom oil pan/sump ACCU sump oil surge prevention accumulator 2400cc injectors Twin Bosch motorsport fuel pumps and fuel su