30 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
8
Sr20de fully rebuilt. Custom made pistons for 14:1 compression, h beam rods, big crow cams, golbys adjustable cam gears, gtir intake manifold. Block was cleaned, decked and machined. Crank shaft was machined and balanced. Light weigh under drive harmonic balancer. Head was cleaned tested machined and ported. Comes with brand new clutch kit with a light flywheel. Engine is ready to bolt in and run.
4
350 Fuel Injected Chev Engine, built as a project, only dyno time. Never installed to a car. 600BHP @7000. Autronic ECU & Harness, Miloden wet sump . SHP Dart 4 Bolt Block. Crower Crank. New parts include, NC'd Brodix Heads (1188106), stainless valves, Jessel Shaft Rockers, Brodix manifold (HV1814), CP Pistons & pins, Oliver 6" Rods, Isky roller cam 294: 302: 108. MSD dual Ignition 9:1 Comp ratio, tuned & mapped on 98 unleaded fuel. Very smooth & progressive. Ready to install. Ideal f
3
New Wiseco pistons New bearings Carrillo rods Internally balanced crank Solid roller Crow cam reground Crane roller lifters Aluminium Yates Roush C3 heads Titanium inlets, stainless exhaust valves T & D shaft mounted rockers, as new Ford Motorsport High Rise Manifold Fully studded heads and main caps Isky springs High volume oil pump High volume water pump
10
RegisteredLog Book
2007 CLUBSPORT IN EXCELLENT CONDITION ONE OWNER COLOUR EVOKE AUTO HAYMAN REECE TOWBAR SUNROOF KM 173,462 RELUCTANT SALE
19 1
RegisteredLog Book
This is one of the rarest of the rare Bullet Roadsters. Built as one of the 2 first V8 prototypes prior to the vehicle achieving full Australian compliance. The only one in this colour, a Lamborghini Silver, this Bullet was owned by its creator John Bettini until approximately 2017. It was then bought by a gentleman in Ipswich who sold it to me in 2021. Unfortunately due to age and health reasons I can no longer keep this awesome piece of machinery. Only travelled around 23,000k's(still used re
8
1244 CC Reground 113E Ford crankshaft, reinforced centre main bearing cap. Repco solid skirt pistons on 113E conrods, Tri Metal main and rod bearings , Grant Rings . 10:1 compression, Holbay 658 full race camshaft, duplex chain drive. Head fitted with stainless oversize valves 7mm stems in Bronze guides , hardened valve seat inserts, PSI competition springs, custom spring seats and retainers, Titan roller rockers, ford cam followers and pushrods new SPR rocker cover. New uprated Capri oil pu
11
Registered
This meticulously restored 1954 Chevrolet Cab Over Engine (COE), crafted by Matt Stone Racing and valued at approximately $200,000, is a true gem with impressive modern features: - The restored 1954 cab and reproduction tub painted in metallic Hot Lava Orange sits on a Chevrolet C20 pickup chassis and has been professionally converted to right hand drive. - The engine is a 2022 model 6.2-liter LT1 V8 engine producing 343kW of power and 881Nm of torque. - The automatic transmission is a 20
8 1
2014 Ford Coyote Super Cobra Jet. Selling due to new life priorities, excellent engine, regretful sale. Just been fully rebuilt, no expense spared list of work below: DISSASEMBLE ENGINE AND INSPECT. SUBLET ENGINE TO SALIBA ENGINES FOR MACHINING. FIT ARP MAIN STUD Kit. FREIGHT ON ENGINE PARTS TO SALIBA. SUBLET HOT TANK ENGINE BLOCK. BORE & HONE TO SUIT NEW PISTONS. DECK BLOCK TO TUNNELS. LINE HONE BLOCK. GRIND CRANK. BALANCE ENGINE ASSEMBLY. CLEAN BLOCK AFTER MACHINING. SUPPLY & FIT OIL G
6
Genuine NASCAR R5 P7 engine (2 available) both fully rebuilt by Steve's Race Shop with components from Eatmon's Racing USA These are the proper 800hp+ engines originally run by Ernie Elliott NASCAR race team. Professional rebuild in Sydney ready for Sports Sedan racing and have not been raced as yet. All the good gear; Solid roller cam Roller keyway lifters Bryant crankshaft Carrillo rods Titanium valves and retainers NASCAR dry/vacuum sump Clevite bearings Total Seal rings etc, etc $35k e
9
Fully built Sr20de. Custom made cp pistons 13:1 compression, scat forged rods, ported head and fully reconditioned, mls head gasket, new rocker arms, new lifters, big cro cams, Adjustable timing gears, Tomi rocker stopper kit, gtir itb set up, 650cc injectors, aftermarket fuel rail, block was bored, honed, decked and cleaned, crankshaft was machined and balanced, new timing chain kit, new under drive harmonic balancer probably lots I’ve forgotten. Have more pics of the build if required.
7
BMW 2002 short engine , block ,crank piston, rods , front timing chest with water pump, all been under the bench for many years.
1
Holden 355 Engine - 4 Bolt Main conversion - Mains ARP stud kit - Scat Forged Holden 355 Crankshaft - Scat H beam rods - ARP rod bolt set - Moroso weld up sump kit, 7.5 litres oil - Probe Industries Forged Pistons .030 thou - Floating piston pins - File cut rings - Mechanical roller Camshaft .750 thou lift - Roller lifters - Manley Extreme duty Valves, 2.080 intake, 1.600 exht - Double Valve springs, Retainers, 10 degree locks - Holden EFI Cylinder heads, Extensive port work - Harrop Single pla
7
Ford AU Saloon Car complete running engine. 3K CAMS sealed, with new camshaft, valves & springs. Complete with headers (not pictured)
1
FOR SALE 526 Billet brad 6 Bryant crank Dan Olson sump dry sump pump grp rods brad manifold 990enderle fuel pump with shut off Engine is fresh / new. Engine has not been fired since complete rebuild. (Built by Aaron hambrige) Pick up Somerville $50000 Andrew 0400350057
5
Shelby 5.4L 4 Valve Kenne Bell Liquid Cooled Supercharged Motor Competition Clutch Pack Genuine SVT Motor built with all competition components Also available is a TR6060 Competition Race 6 Speed Gearbox - $5000
3
Built by the legend himself Pip Barker New build never had fluids in it. Only been sat in a car for transport Should make 450+ hp S38 B36 - eng 86mm stroke 95.4mm bore 3688cc 11.4:1 compression Shotpeened resized rods with new rod bolts M1 Pro Car Valves 37.5 inlet, 32.5 exhaust S14 DTM 2.5ltr pistons Cosworth grind cams by Tighe Engineering (as per cam sheet) approx 316/320 S38B38 Head gasket Group A valve springs & retainers @ 75lb Will come with used carbon fibre air box and ultra light
10
Still available for sale, run for 10 mins to test oil pressure , video available , 109E block bored 60 thou, Crankshaft -- reground 113E , re-inforced centre bearing cap , Tri Metal main and conrod bearings Grant rings. Repco solid skirt pistons on 113E conrods . Holbay full race camshaft with duplex chain drive. Head -- skimmed with stainless oversize valves with 7mm stems in bronze guides, american PSI competition springs and retainers , custom spring seats , hardened valve seats, Titan roll
10
Registered
2010 Holden Statesman WE Sleeper Can be driven on open road Takes E85 only, set up for dragging 402 iron block with Borg Warner turbo Turbo 400 gear box Comes with tyres and rims to drag 14 psi, 868hp at the hubs, 10.8 sec quarter mile. Good condition, one owner only. Registered on road, genuine sleeper. $65,000 ono.
3
For Sale! Brand New 410 Inglis Sprintcar Engine Engine is brand new & built with current & latest parts. Engine is built & dynoed & has fuel system & ignition box. 700ft/lbs torque 900hp Phone for more details regarding parts & components. PRICE IS PLUS GST!
1
410 Group A engine for Jetsprint- Best parts money can buy went into this engine. Assembled by Maxwill in SA, this engine will be the strongest in the Grp A field. Approx 720HP. If you want a Group A Title then this is the engine for you. Only used in 4x races by Damo O'Leary hasn't missed a beat. Valves also relieved while in storage, spent over $SOK on parts, then assembly $65,000 AUD ex SGA Depot 1/67 High St MELTON VIC AUSTRALIA