41 items for sale

Recent 2Pk undercoat. Body is straight. Spare dash with rev counter. 2 engines 1600 and 2000L with extractor and seperate cross member and stabaliser bar. Both engines turn easily. Standard 4sp gearbox. Spare 1600 cyl head and rocker shaft. Floor,wells and heater bubble origional. Dash cracked, bottom of doors repaired.Did not strip myself but all parts appear to be present. Brake booster rusted. Small rust front floor corners only. Will look at decent offers. Selling as want to buy a caravan.

Rx7 built in 2014 By Jeff Holland JB Fabrication Central Coast. Has run a 6.4 1/4 mile Carbon front clip fibre glass rear half including doors (Comes with moulds for front clip & doors) Strange front spindle single adjustable shocks with TBM twin piston brakes light weight Rear shocks double adjustable both just been serviced. Strange 4 piston brakes and steel discs. 2 fire bottles 2 parachutes new cables cylinder springs 2 new 15x15 weld rims DBL with new 33x15x15s slicks Front spindle wel

This meticulously restored 1954 Chevrolet Cab Over Engine (COE), crafted by Matt Stone Racing and valued at approximately $200,000, is a true gem with impressive modern features: - The restored 1954 cab and reproduction tub painted in metallic Hot Lava Orange sits on a Chevrolet C20 pickup chassis and has been professionally converted to right hand drive. - The engine is a 2022 model 6.2-liter LT1 V8 engine producing 343kW of power and 881Nm of torque. - The automatic transmission is a 20

Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

598 bbc -1150 hp 7.5s @175mph on soft tune Merlin block (grout filled) Brodix heads Methanol injection Racglide with transbrake+airshift Delaybox Airbrushed paint Custom tilt trailer with electric winch Getting out of racing My loss your gain Please call Greg 0436377406

Brand new 383 Chev Roller engine Hillborn injection, powerglide. MSD ignition, 35 spline maxispool diff 4.33 diff gears, Harrop alloy diff carrier, deadenbear delaybox, chute, Convo Pro rims, the list goes on. Ground up build, bare metal respray, this car is a true steel body car with everything done and ready for its debut run down the 1/4mile. Receipts for engine and work total well over asking price. Further details contact Chris on 0409348441.

The ultimate evolution of the 930 Turbo. 3 owners from new. Coming from Australia’s best Porsche collection. South African spec car; never been on UK soil. Matching numbers, books from new and immaculate. A factory RHD 1989 930 is a rare item, with less than 200 made, unfortunately none of which were delivered to Australia new. So, if you want the ultimate factory specification 930, you have to pick a good one from the UK, which can be a bit tricky, especially for people who don’t come from are

This is a one off 1963 USAC (UNITED STATES AUTOMOBILE CLUB) National Midget Championship winner. The driver was Bob Wente who was a visitor to Australian speedcar racing in the sixties. He was inducted into the USAC Hall of Fame in 2014 & still has the 3rd greatest Midget race record in US Midget racing history. This car is the last example of the famous Kurtis Kraft/Offenhauser design built by John Pawl , who bought out the Kurtis Kraft Midget business in the late 1950's. This car was deli

1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.

• Built from a very rust free CK44 rolling shell. Only rear wells and heater bubble replaced. Steel Mexico front wing flares added. • Bare metal shell repainted. • Rebuilt and upgraded 1600cc GT OHV engine built by Trevor Hines. • Significant number of new or NOS parts used including:- radiator, starter motor, alternator, head lining, 9” rear brakes, Mk2 front suspension, M16 calipers, all new bearings and bushes, tca’s, carpet, laminated windscreen, clutch, battery, new tyres. • Genuine UK made

Professionally Australian built with American know-how. Motor is a fully worked big block Chrysler (253 cube) 3 speed gearbox, with USA quick change diff. Has triple Rotchester cars and an all alloy body. The tyres are racing 600x16 Dunlops, done 20hrs. The car itself had never been damaged and is well looked after. Last 8 years competed in regularity events in Perth. It is currently CAMS log booked. Owner is member of VSCC WA. Car garaged in Perth metro. This unique one of sprinter is modelled

It's time for my Humber Speedster project to be passed along to someone who can finish it. I had always wanted a pre-1920’s Speedster but as they don’t suit the highway driving of today I decided to make one from a car that could. The donor car was a ’32 Humber rolling Chassis. All the hard work has been done, and 99% of the materials and components purchased. I have chronicled the build in photographs and a blog, plus starting the engine for the first time on a video. When going through the par