24 Modified Car, Bike or Kart for sale

Young Timers Garage (YTG) proudly introduces this 2005 Ferrari F430 enhanced by Novitec Rosso! Delivered in Hong Kong on August 31, 2005, by Auto Italia Limited to Mr. James Chow, this exquisite model boasts a captivating combination of Rosso Scuderia exterior (Now Painted Satin Black), a Nero cabin, and Bordeaux Carpets—a meticulously crafted specification likely built to order. Loaded with premium factory options, including Carbo Ceramics, Rosso Scuderia Callipers, Scuderia Ferrari Shields,

540ci Big Block Chev Dragster, American built, 237” wheel base, turn key ready to race, includes enclosed trailer. Owner retired from racing. Car has run 7.7 seconds at 172mph, with scope for further development. 32 channel data logger, Biondo delay box, MSD ignition, new Hoosier slicks, fully equipped enclosed Trailer, spares, fuel, all existing data and support from current owner. ENGINE rebuilt and dyno tuned by PM Race Engines, twin tunnel ram methanol injection, Reher Morrison heads, Crane

Six speed manual. Log booked. CAMS approved roll cage. Excellent condition. Eligible for Group 3E Production Cars and Group 3J Improved Production Cars. Spares tyres included. Endurance fuel tank. Rear axle is a standard 188mm crown wheel version, ratio is 3.46:1 (standard), centre is a locked diff. The rear cover has been modified for a diff cooling setup that has been removed. Front suspension has height adjustable coilovers, Whiteline sway bar with adjustable link, and camber plates. Brak

2007 Ferrari F430 Challenge Race Car - Private Collection - Bianco - ONLY 21,000klms - ONLY 142 Challenge F430's Ever Built - Raw *** TRACK CAR ONLY CANNOT BE REGISTERED*** We are extremely pleased to offer you this very special opportunity in securing of one of the rawest best driver-focused track cars ever produced from Ferrari. This 2007 Ferrari F430 Challenge "Track/Race/Club" car developed by Ferrari Motorsport for the F430 Challenge race series around the world and is a true track-focuse

125 Wb weldwell dragster 383 sbc, power glide , 9 inch Competitive in modified class 8.3 et complete set up Trailer , spares Call for more info

1963 Chevrolet Corvette C2 Split Window - 1/1 Built - Superspeed Grand Sport Race Car - FULL Re-Creation from GM drawings/designs - YTG is proud to present one of the most unique and historically significant Corvettes ever built: A 1963 Chevrolet Corvette C2 Split Window Coupe, handcrafted as a one-off Superspeed Grand Sport — a stunning realisation of what GM’s secret Grand Sport project might have achieved if allowed to continue. This 1-of-1 Super-speed Grand Sport is based on original GM de

Chassis Number 6316. This highly original Elfin ran as both a 1500 (ANF2) and a FJ as noted on the Certificate of Description. Currently fitted with a dry sump 1500cc modified Ford Cortina engine and VW based gearbox but could run as a FJ. Originally owned and raced by Jack Hunnam, the Elfin agent in Victoria. He completed the car with the current style wheels as now fitted and rear disc brakes as opposed to drum brakes as normally fitted to these cars. Fitted with a 1500cc Ford engine he entere

One of the original 4. Includes over $40k of spares (Will not separate). Lightweight 1220kg, Biggest brakes in Group N. Fibreglass front and rear fenders, bonnet, doors, boot and bumpers. Dennis Johnson built 289ci. 1 meeting old. 400++ ftlb, 500+ hp - Dyno sheet to purchaser. Ford Motorsport 302 Boss 4 bolt competition block, steel crank, RHS heads, Jesel valve gear. Jesel external adjustable Belt Drive. Canton Auccusump with auto-valve. System 1 -12 oiling system. Pro Sys custom (Holley) 4 ba

2006 FPV DRIF6 – The Original Factory-Built FPV Drift Car Offered for sale is one of the most significant and recognisable vehicles ever produced by Ford Performance Vehicles Australia the original FPV DRIF6. Built by FPV and Prodrive Australia as a one off promotional and competition vehicle, DRIF6 was created to showcase the capability of the FPV F6 platform in Australian drifting competition. The car was publicly unveiled in 2006 and subsequently campaigned in the Australian Drift Champions

This thing started life as a sweet, innocent Mini. Now? It’s been lovingly modified with a shortened WRX subframe. Think backyard motorsport Frankenstein made from a mix of wild decisions and good intentions. It’s running a Subaru motor with all-wheel drive, not because it made sense... but because I needed a reason to smile again. It’s sitting on BC Racing coilovers, adjustable enough to suit whatever chaos you’re into. Tyres are fresh, they’ve basically just had a nap. The exhaust absolutely

I'm listing up my 2005 Mazda RX8 - 6 speed manual for a regretful sale. This is a fantastic car for fun tarmac rally, circuit, or just drive it on the road. It is still fully road registered (not club etc) and if desired you could return it back to factory spec. I deliberately kept the build modest so future owners could return things to original, or go wild and continue to build. I would love to keep this car; but the reality is that it sits in the shed all but 7 days a year. I have another R

2020 Toyota GR Yaris (Base) 21,000km approx. Strong street and track day car. Class winner Australian Hillclimb Championship 2024 Sports Sedan 4wd and Tin Top Shootout winner. Minimal use since mid 2024 (new dad life) Has lap times on re71rs: 1:03.x Broadford 1:33.x Winton 55.x Bryant Park Clockwise 59.x Bryant Park Figure 8 Comes as pictured except for on standard wheels and tyres (18x9.5 +38 with 265/35 18 is pictured). 1 owner since new, owner serviced, garaged etc. Lightly modified.

CLENET SERIES I ROADSTER (1979) 351CI 4-BARREL HOLLEY V8. ULTRA RARE NUMBER 206 OF ONLY 250 EVER PRODUCED. A timeless 1930's style classic American coach built collectable with a documented 13,723 miles from new. Sold new in 1979 in excess of $100,000 USD as a fully hand built, full production vehicle ' NOT A KIT CAR!! While in America, it remained exclusively a California car and thus perfectly preserved in the dry California climate and remains highly original to date. With its original exter

In it's original configuration this car won the UK Sports 2000 Series, driven by Ian Taylor. The rolling chassis was imported into Australia in 1982 and modified to run in the 1983 Australian Sports Car Championship. A new FT-200 and a "270 bhp" Mazda Rotary 12A PP were installed along with wider wheels and larger brakes. The unsorted car was driven by Richard Warland at Sandown, AIR and Amaroo, it was fast but unreliable. Next driven by John Smith at Oran Park, John won one heat and very com

-Car is for sale less engine and transmission -Log booked for both MA and AASA It’s time for us to sell and pursue bigger and better things. Plenty of history in this truck on our social media pages (MOR Motorsport), call me crazy but I’m still convinced the truck will do well at Don River Dash and Finke. All previous major issues we have had with the car are now sorted, new owner needs to put in their own engine and trans setup, everything else has less than 100km from its last prep. Sold wi

Offered for sale after an extensive ownership period is James Brock’s Bathurst Tourer 300-winning Commodore. Originally a VP Commodore race body shell, this car was first built as an AUSCAR by Melbourne-based business owner Greg Stevenson to race as part of the Australian Super Speedway Championship. It made its race debut at the Thunderdome in December 1991 and was raced as the #03 Goodyear Commodore by the late Peter Fitzgerald. In Fitzgerald’s hands this car finished third to Brad Jones and

2024 VRC championship winning car in its first season. Fiesta G4 light weight fiesta shell using a M-Sport engineered load path cage with Dytko wrc inspired fibreglass body. Currently on 2024 minimum weight of 1270kg with heavy sump guard, full aluminium underbody protection & other heavy parts purposely put on the car to make minimum weight and adjust car balance. Can be easily brought down to the new minimum weight. Tubular stainless high mount exhaust manifold. Running individual EGT s

Gc8 wrx Engines: Milton engines close deck Pinned mains Darton sleeves Manley extreme duty pistons with larger pins Nitto i beam rods Nitto billet 2.5l crank Arp case bolts Arp 14mm headstuds Firelok headgaskets Heads are 99 big Port casting Chambers and ports modified Ferrea comp plus intake and exhaust valves Kelford valve springs Kelford 282 cams Bc adjustable cam gears Rcm high grip tensioner and guide Xtreme twin carbon clutch Rcm auto verdi dry sump Ams intake manifold Id2600xds injectors

A rare opportunity to pick up a fully specced time attack project that just needs the finishing touches. The hard work and money have already been spent—take this beast, finish the final 5%, and hit the track with a weapon built to dominate. After years of building and over $100k invested, it’s time to accept I won’t have the time to finish this incredible project. So here’s your chance to jump in and take it across the finish line. I originally bought this 180SX with dreams of creating a 300r