64 Modified for sale

1963 Chevrolet Corvette C2 Split Window - 1/1 Built - Superspeed Grand Sport Race Car - FULL Re-Creation from GM drawings/designs - YTG is proud to present one of the most unique and historically significant Corvettes ever built: A 1963 Chevrolet Corvette C2 Split Window Coupe, handcrafted as a one-off Superspeed Grand Sport — a stunning realisation of what GM’s secret Grand Sport project might have achieved if allowed to continue. This 1-of-1 Super-speed Grand Sport is based on original GM de

Young Timers Garage (YTG) proudly introduces this 2005 Ferrari F430 enhanced by Novitec Rosso! Delivered in Hong Kong on August 31, 2005, by Auto Italia Limited to Mr. James Chow, this exquisite model boasts a captivating combination of Rosso Scuderia exterior (Now Painted Satin Black), a Nero cabin, and Bordeaux Carpets—a meticulously crafted specification likely built to order. Loaded with premium factory options, including Carbo Ceramics, Rosso Scuderia Callipers, Scuderia Ferrari Shields,

Track car for sale! Left-hand drive - 2007 GT500 signed by Carroll Shelby half roll cage custom interior with racing seats and harnesses. Short shift Battery relocated to boot to allow room for intercooler header tank. A/C delete kit custom tubular cross brace/engine support. Custom front racing suspension chassis strengthening custom racing rear suspension and differential 6 speed tremec aluminium drive shaft 6 pot Bayer brakes on all corners Ford V8

Van Diemen FG, Mitsubishi 4G63 2 litre NA engine, Hewland 5 speed transaxle. Built 1991 for Japanese one make Shimzu Cup series, essentially a Van Diemen FF2000 modified for the 4G63 engine. Excellent track day car, MA log book as Formula Libre so you can enter Formula Libre/ Free Formula combined races. Full rebuild a couple of years ago, occasional lap sprint days since. Strong engine, rebuilt gearbox and transaxle inc new CVs. . Centrelock wheels, slicks, brake pads one meeting old. All fibre

Six speed manual. Log booked. CAMS approved roll cage. Excellent condition. Eligible for Group 3E Production Cars and Group 3J Improved Production Cars. Spares tyres included. Endurance fuel tank. Rear axle is a standard 188mm crown wheel version, ratio is 3.46:1 (standard), centre is a locked diff. The rear cover has been modified for a diff cooling setup that has been removed. Front suspension has height adjustable coilovers, Whiteline sway bar with adjustable link, and camber plates. Brak

Current Australian Pulsar Racing Association (APRA) competitor ( https://apra.club/ ) Log Booked as 3E Production Car that can compete in a handful of categories with minimal/no modification Car has never been in an accident that required bodywork, paint or a replacement panel. It's the exact same livery it started the APRA series with in 2023. It's had a few touches here and there, but that's racing! It will come with different, but brand new 15"x7" rims than the pics. APRA specific parts: Sea

2007 Ferrari F430 Challenge Race Car - Private Collection - Bianco - ONLY 21,000klms - ONLY 142 Challenge F430's Ever Built - Raw *** TRACK CAR ONLY CANNOT BE REGISTERED*** We are extremely pleased to offer you this very special opportunity in securing of one of the rawest best driver-focused track cars ever produced from Ferrari. This 2007 Ferrari F430 Challenge "Track/Race/Club" car developed by Ferrari Motorsport for the F430 Challenge race series around the world and is a true track-focuse

Chassis Number 6316. This highly original Elfin ran as both a 1500 (ANF2) and a FJ as noted on the Certificate of Description. Currently fitted with a dry sump 1500cc modified Ford Cortina engine and VW based gearbox but could run as a FJ. Originally owned and raced by Jack Hunnam, the Elfin agent in Victoria. He completed the car with the current style wheels as now fitted and rear disc brakes as opposed to drum brakes as normally fitted to these cars. Fitted with a 1500cc Ford engine he entere

One of the original 4. Includes over $40k of spares (Will not separate). Lightweight 1220kg, Biggest brakes in Group N. Fibreglass front and rear fenders, bonnet, doors, boot and bumpers. Dennis Johnson built 289ci. 1 meeting old. 400++ ftlb, 500+ hp - Dyno sheet to purchaser. Ford Motorsport 302 Boss 4 bolt competition block, steel crank, RHS heads, Jesel valve gear. Jesel external adjustable Belt Drive. Canton Auccusump with auto-valve. System 1 -12 oiling system. Pro Sys custom (Holley) 4 ba

Mx5 RACE CAR 1991 NA THIS VERY WELL KNOW RACE CAR IS NOW FOR SALE. 2B LOG BOOKED EVEN THOUGH THE CAR HAS BEEN AROUND FOR A LONG TIME IT IS NOT AN OLD CAR. APART FROM BODY PANELS, VIRTUALLY EVERYTHING HAS BEEN REPLACED AND / OR UPGRADED AS PART OF AN EXTENSIVE MAINTENENCE SCHEDULE. OURRIGHT WINNER OF THE CUE ENDURO SERIES MANY CLASS WINS INCLUDING LAKESIDE, QUEENSLAND RACEWAY, MORGAN PARK AND PHILLIP ISLAND. ALSO RACED AT BATHURST. VIDEOS AVAILABLE FOR ALL CIRCITS. ENGINE LAST FULL REBUILT IN 2

Mitsubishi 2012 CJ Ralliart Good value for everything, capable chassis similar to the Evo X without the Evo price tag and still AWD with the RS diff, with the same running gear from Mistubishi as Evo X, can even be setup to run 5 speed with small knotch to the chassis to fit in, all evo x parts will fit in. Stat Write Off with no more than 6000klms on chassis fresh water damage, no accident or rust damage. Selling due to changing chassis type. Well sorted out car ready to go Full under chassis k

1997 Elise S1, early chassis #646 with green glue, circa 79,000 kms. Personalised Rego, 72OKG, expires 12/2026 Australian delivered, believed to be in the first batch of 6 cars ordered from the sydney motor show. I've been the custodian of this car for around 9 years. While it was lightly modified prior to my ownership, I have taken it several stages past this but with several other track dedicated cars i'm just not using this car as much as it deserves. Driveline/Engine bay Honda k20 install

A true piece of post-war motorsport history, this 1949 Marwyn 500 JAP is believed to be the most original surviving example of its kind anywhere in the world. Built during the formative years of the 500cc Formula, the Marwyn was notable as the first manufacturer (from 1947) to offer a production racing car either fully assembled (£450) or as a kit, powered by J.A.P. motorcycle engines. Marwyn was absolutely one of the pioneer manufacturers of the 500cc Formula. Based in Bournemouth before movin

#43 Racing 1982 Series 2 Group C RX7 Built as a tribute to Allan Moffat and his championship winning Peter Stuyvesant's Factory Team car. The car was viewed and approved by Allan with the dash signed by him. The car was also used for one his final interviews. Built by me in 2010 and has run every season since in Heritage and Historic race meetings. Alec Bell from KiwiRE and MADLAB has worked with me to develop the car to where it is today. The overall car has been continuously developed and

Ex 888 promo vehicle signed & driven by Craig Lowndes at events around Australia in 2017. Full Team Vortex livery including the same spoilers & wheels as the original race car version. Raffled off by 888 in 2018 (have disposal letter), vehicle since been modified to be as close to a road legal race car as possible while keeping Tasmanian registration. Original engine was replaced with a new LSA crate motor that was stripped down & rebuilt by Harrop & Sam’s Performance with premium upgrades - t

Renault Clio 172 | Rotrex Supercharged | 195hp ATW Track Car Yeah I know it’s different, but who wants to be the same as everyone else. Another price reduction...the value just keeps getting better! The brakes, supercharger and diff cost way more than this! A few weeks ago at Lakeside my son in his first ever drive of the car did a 60.6 sec lap, at 200 km/h through the kink. How fast could you go? Renault Clio 172 track car. Rotrex-supercharged, 195hp at the wheels, approximately 900kg, Qu

Ex Chris Murchison champinship winning car. Australian Cams and NZ Log books. All prepared Ready To Race no expence spared. Originally prepared by Wagne Groeger in Melbourne . Assembled in NZ . Details of complete restoration can be supplied. Front suspention modified by Brett Lupton into a STEALTH type. Magic to race. Heaps of suspenion spares 4 corners. Jigs for the manufacture of front suspention built by Morland racing. NZ spec race motor rebuilt May 2026 and has only dyno time on it. New

This thing started life as a sweet, innocent Mini. Now? It’s been lovingly modified with a shortened WRX subframe. Think backyard motorsport Frankenstein made from a mix of wild decisions and good intentions. It’s running a Subaru motor with all-wheel drive, not because it made sense... but because I needed a reason to smile again. It’s sitting on BC Racing coilovers, adjustable enough to suit whatever chaos you’re into. Tyres are fresh, they’ve basically just had a nap. The exhaust absolutely