56 Nissan with Roll Cage for sale

N14 SSS Pulsar. Has competed at the Winton Sprints and other Sprint events over a number of years with no hits or shunts. Not up to APRA spec but not far off. *Engine rebuilt by Cave Hill Engines and assembled by RG Customs 600ks ago. *Yellowspeed Coilovers *Lenso 15 inch rims fitted with Hankook RS 4s *AGI half cage *Welded diff *Stainless headers and engine pipe. * Many other Mods and improvements * Cones with some spares Last run at Winton Septemper 2025. Car is in Echuca Victori

Mazda Rx3 rear diff with full floating hubs. Three piece light weight race wheels 16x10 front and Rear. Custom front and Rear bumpers, spoiler and wheel arches. Front rotors with Nissan 4 pot calipers. Built for fitting a dolomite sprint engine. Comes with V8 subframe to fit Rover V8. Contact me for any additional photos.

A meticulously built car completed over a 12 year period, presented in immaculate condition. The vehicle has never competed or been raced, it has only been run on the dyno for setup and testing. Purpose-built for tarmac rally or IPRA. High-end motorsport electronics and professionally engineered components throughout. Key Features Electronics & Data • MoTeC M84 ECU • MoTeC CDL dash with data logging • MoTeC PDM30 power distribution module • MoTeC keypad control system Chassis & Safety • Motorspo

Improved Production S13 Silvia fitted with Nissan's finest SR20det engine. If you want to run at the front of the field, then this one's for you. This car has been raced extensively in SA, VIC and NSW, having many race wins and pole positions. Top hp engine with all the good bits, forged rods and pistons, billet steel main caps, ARP studs, Borg Warner EFR turbo with 36mm restrictor, 1150kg race weight (including driver). Autronic ECU and M&W CDI ignition. 17 x9 Enkei RPF1 wheels (8) Wilwood 6 s

1989 MX5 (model NA) 1.6 Turbo Logged booked with MSA approved full cage Rally Car. Currently on S.I. rego. Suitable for begginer through to experienced driver (adjust boost level). This is a very well sorted rally car, very forgiving, so so much fun to drive! Ideal for Rally, Autocross, Gravel Hillclimbs, Motorkhanas or easily converted to be a fast tarmac car with more boost. Ready to go. Engine: Mazda 1.6 litre Twin Cam Haltec ECU GFB G-Force III Electronic Boost controller with AFR input a

1998 NISSAN R33 SPORTS SEDAN ROLLER FOR SALE A rare opportunity to purchase a properly developed and high-spec R33 Sports Sedan roller. This is a 1998 Nissan Skyline R33 40th Anniversary Edition, imported, plated and Australian complied in 2002. The car is Motorsport Australia log booked and ready for the next owner to install their own engine and gearbox package and go racing. CHASSIS AND DRIVELINE Motorsport Australia log booked Imported, plated and Australian complied in 2002

1977 Datsun 260Z Coupe (2 seat) — S30. Owned and cherished for 20+ years. Body — all original panels. No Rust. Has a front spoiler and a Skillard front Splitter. BRE (Brock Racing Enterprises) Mirrors and Rear Spoiler. Car has always been the same colour since I have owned it (I think it was probably originally a silver car). Colour is Alfa Romeo red (Alfa 289/A is the colour code). It has never been in an accident. Exterior is in excellent condition for age. It has essentially had a close

1988 Nissan Skyline GTS-R Group A Australian Touring Car - Fred Gibson Motorsport - Factory Nissan Works Car - 4th Bathurst 1000 1989 - George Fury / Terry Shiel "The unsung hero of Nissan's first ATCC victory." ......A title bestowed upon this remarkable machine by many of Australia's leading motoring journalists. We are incredibly proud to present what is undoubtedly one of the most historically significant Japanese competition cars ever offered to the public this genuine Fred Gibson Motorsp

Current Australian Pulsar Racing Association (APRA) competitor ( https://apra.club/ ) Log Booked as 3E Production Car that can compete in a handful of categories with minimal/no modification Car has never been in an accident that required bodywork, paint or a replacement panel. It's the exact same livery it started the APRA series with in 2023. It's had a few touches here and there, but that's racing! It will come with different, but brand new 15"x7" rims than the pics. APRA specific parts: Sea

For Sale WAS $35,000 NOW $30,000 1992 Nissan 180sx (sil80) 223,492 kms on cluster Built engine @ 217,087 kms Engine and Intercooler system: SR20det Eagle H-Beam Rods CP Pistons Nitto head gasket ACL bearings ARP head & main studs Aeroflow oversize oil pan Kelford 188-A camshafts Kelford KVS93 valve springs Kelford KCG20 adjustable Cam gears Ported Head New Nissan rocker arms New Nissan hydraulic lifters Tomei rocker arm stoppers New Nissan timing chain and guides New Nissan water pump,

TR7-V8 TRACK CAR Ultra reliable & immaculately presented – ready to race Ideal car for Club Sprints + MG & Invited Racing Series. • Rover 4.6 Litre Engine. Built by V8 Developments in England. • Weber 500 Carb on Edelbrock intake manifold. • 300 hp @ 5600rpm. PkTq 325 @ 3600rpm. • Mustang T5 Gearbox. • Quaife LSD 3.9 • Gaz Shocks. Springs 600lb front, 350lb rear. • Elec Power Steering. • Willwood Front Brakes. Nissan R31 Rear. Pedal box. Bias adjustable + 2 new sets of QFM Disc Brake Pads QDB

BMW E90 M3 Production Race Car – Bathurst Proven – Race Ready Located Orangeville, NSW Fresh from competing in the 2026 Bathurst 12 Hour Combined Sedans support category, this is a professionally built and well-maintained E90 M3 that is ready to race at state or national level. The car is reliable, fast, easy to drive and has been developed over several years into a genuine front-running Production Car package. It has won championships, set lap records and has always been maintained. Highli

Nissan 300ZX Twin turbo with 3D logbook, can run sports sedans and TT series -VQ35 Engine with forged pistons and rods -Dry Sump Billet sump -ARP head and main studs -Ported heads -Stronger valve springs etc. -Twin 3071 turbos -Haltech ECU M & W CDI -PPG straight cut gear box -Extensive chassis and suspension development -Camber and caster adjustable -CAMS log booked as improved production, although it is now more of a sports sedan and time attack car. -1220kgs -tilton clutch -GTR diff LSD 1.5

Great Beginners Car, 1.8L Manual, standard Running gear. it has been a great car but we have no use for it at the moment. it has been sitting in the shed for the Past 12 months and its time to move it on. Half roll cage, no log book, BC Coilovers, been used for my Kids in Motorkhana and hillclimbs, It Has a Race seat fitted but Harness it out of it due to being out of Date. Can arrange one for the right price. 2 sets of wheels and Tyres, Not perfect condition, had a few scrapes as the kids lea

R33 track car but can be registered. Executive owner with 10 track days in last 15 years, imported in 2003 completely stock. Receipts for nearly all mods. Tuned by Racepace. Car is mechanically A1, paint/interior not perfect. Rebuilt motor, Makes 258rwkw, 270-280rwkw available with exhaust mods. Never failed always reliable track car. ENGINE rebuilt 2,000 kms ago "A27" Arias forged pistons with Total Seal rings N1 Water pump N1 Oil pump R34 GTR rods Tomei 256o Poncams King bearings High Energy

Car: 1984 Nissan HR30 Skyline Sedan Fully Tagged and Complied ready for Tarmac Rally Rego CAMS Log Booked 3C Touring (Tarmac Rally) National Spec Cage Nissan fj20 210kw ATW alloy rods bosh injectors ect.. Tremek 600 close ratio gearbox 1l Surge tank Brand new link ecu installed and dyno run Head work recently done with high tensile head bolts installed Custom made adjustable suspension Heaps more specs message me if you’re interested and I will send through. This car also comes with a spar

Ford Escort MKII 1980 2 Door built to IPRA 3J U2L rules and log booked, I have raced this car over many years in the NSW state championships, and IPRA Nationals, this is a race winning car winning the SA Nationals in U2L class outright. I have also raced in support categories nationally with Super Cars, Bathurst and most recently Touring Car Masters "Invitational" This car is ready to race tomorrow. Brief specs Engine 2.0L Cosworth built crate duratech engine dry sump - Cosworth spare engine

Just in time for summer. Built by an Engineer in Hobart between 1997 and 2002, first registered on Full registration in 2002. Engine is Nissan FJ20 Twin Cam, with Wade fast road cams. Also fitted with 2 Weber DCO-SP 48's and custom extractors. Ignition is by modified distributor removing vacuum advance, mechanical advance only, fitted with Luminition and adjustable Rev limiter, currently set at a safe 7200rpm. Gearbox is 5 speed from Skyline as engine, rear diff is also from the Skyline and ha