34 Nissan Car, Bike or Kart for sale

Ideal track day or tarmac Rally Car What Makes It Special? • Clean, bold exterior that turns heads, built for Tarmac rally or a great track car, its been a 12-13 year build • Motec M84 ECU, Motec CDL Dash with Logging, Motec PDM 30 & Motec keypad • Full MA Certified Roll Cage & MA 2B Sports Car log book • 2 sets of Team Dynamics 18 x 8.5” wheels • R32 GTR alloy bonnet, GTR rear wing & GTR plastic fuel tank • Brembo brakes all round with pressure sensors for logging • Astra hydraulic power stee

GT Collective is proud to present this Nismo GT-R from our network. Price is in USD excludes shipping and government charges. GT Collective can arrange shipping door to door from the US 2018 Nissan GT-R GT3 Race Car with $100k+ of Spares4 This car was fully prepped to run on the GT3 grid for 2026 before a change in plans. Fully prepped and ready race. The car just completed shakedowns at Sonoma and Sebring. Chassis 9250km Engine and Trans have 4200kms Completely refreshed to race in SRO or o

1995 Nissan S14 Australian delivered track car with an extensive list of modifications, engine built by the Horsepower Factory with performance components (forged pistons, rods and bearings) Controlled by the Motec M48 engine management system. Front mount intercooler & adjustable turbo boost at your fingertips. Mishimoto big core radiator & Kaz differential, battery relocation to boot. Upgraded R33 GTS Brakes (rotors and pads brand new). Coil over tuned suspension with strengthened componen

Up for sale is our ground-up build Nissan Bluebird — a no-expense-spared 900hp turbo sequential weapon, packed with the best of everything and ready to race. The build has been fully documented on our Instagram page: https://www.instagram.com/harris_motorsport Since building the new motor, the car has only seen dyno time and one test day. It has been sitting unused for the past 2 years as life has gotten in the way. During that time, the car has been completely freshened up, further refined, a

BMW F80 M3 production race car, ready to run in production racing, Bathurst 6 hours or other classes in Australia. Completed Bathurst 6 Hour 2025, ran a 2.24 still running air conditioning and a lot of extra weight still to be removed from car, led the race towards the end of the first hour (see photo car 154), came 2nd overall in Winton 300 in 2025 and won the class, car details are below, also available a complete spares package as noted below )including a 200L dry break fuel rig) for an addi

Up for sale I have my R33 GTR Lots of money spent, have a full list of parts I’ll share with genuine buyers. Main things: Tomei 2.8 built motor with tomei parts throughout top and bottom end. Less than 1200kms on it. Platinum block brace Duel pump fuel system. Precision 6870 turbo. Os giken 5 speed gear set with billet sandwich plate. Ohlins dfv coilovers Full fresh respray (only because I’m fussy, have full photos of it prior to the respray) Have installed a mines R34 steering wheel which is

For Sale: Nissan S14 200SX – E85, Track-Prepared but can also be registered! A well-maintained and thoughtfully upgraded Nissan S14 200SX, recently freshly tuned on E85. This car has been assembled with a focus on balanced performance, reliability, and handling, making it ideal for track use or as a capable street/club car. Clear PPSR and car can be registered. See modifications below. Engine & Fuel System • Nistune ECU tuned for E85 (Tuned by DrDrift 200kw) • Garret S15 turbocharger on afterma

Sadly, it is time to sell my beautiful Mallock Mk31 clubman sports racer as my time circuit racing has come to an end. This is an English car built in the Mallock factory and is chassis No.1. It was completed shortly after Arthur Mallocks’ passing and was the first car by Mallock to be CAD. The car comes with a dual axle custom made trailer and many spares. It has a fully documented log book and has had a long and successful history. Besides winning many races in its class it also managed to com

S13 track car. Fast reliable competitive car with numerous wins at Morgan Park, Carnell Raceway, Pittsworth Sprints. Engine: Dart 4 bolt main block, AFR 185 Renegade heads, Roller Cam, Edelbrock Super Victor Manifold, Forged pistons, H beam rods, ARP studs, main & head, Steel lightened flywheel, Scat 331 forged stroker crank, Windage tray, Crank scraper, Baffled hi volume sump, Rollmaster timing set, Comp Cams roller lifters, Long pintle injectors, Engine plate mounted, 4 into 1 tuned length ex

Alumicraft Class 10 Immaculately presented and maintained with all service records. Has qualified 1st at Finke 3 years in a row, will be a hard car to beat with a bit better luck! Prepped and ready for next race in including fresh powder coated A-Arms, wheels etc. Never crashed by current or past owner. Engines are $1200 from the wreckers, this is the most economical way to start in offroad racing, have all prep documents and can assist with prep training if required. The best of every spec

This is a rare NISSAN BLUEBIRD SSS ATESSA ONLY PRODUCED 706 units with SR20 engine and traveled 82000km and one owner car, any collectors and car enthusiasts can contact me for more details.

Nissan Pulsar SSS N15 2.0L Hatch Track Day Circuit Car Selling my track day car, great entry level car for those wanting to have some fun and participate in some track days Car specifications: -2.0L Engine -5 Speed Manual -Extractors with 2 1/4" Exhaust -Lightweight Flywheel -Ceramic cushion button race clutch -Cold air intake -DBA T3 performance front rotors & EBC Yellowstuff track pads -EBC Redstuff rear pads -Lowered king Springs -Lightweight race rims -Federal RS-R 195/50Z R15 Semi Slick

$239K R33 LM Vspec LMGT1 genuine wheels Only 108 Vspec built Owned for 6 years Have never seen another one Mechanically spot on and drives well Aside from some minor cosmetic mods is as nature intended Interior clean and tidy Everything works No issues Paint has a few minor issues which I have left so I can drive it without having a heart attack Car has been driven and enjoyed but it’s time for a change Inspection welcome after proof of funds as it’s currently in short term storage while oth

2.0 Litre SR20 VET engine. Aftermarket inlet manifold and exhaust. Large brakes all around. Large alloy fuel tank in rear seat area with firewall. Well sorted, fast and reliable. Race winning car! Heaps of spares including- Several sets of alloy wheels and tires. Brakes and suspension components. Basic 2 way radio system. Ready to race in any of the upcoming Motor Events Races. Located in Pakenham Upper

Up for sale is one of my Pulsar track cars. Basic rundown of the car: - N14 SSS hatchback - SR20DET from a bluebird turbo (not de+t) - ACL race bearings - 5 speed manual box (not LSD) - Exedy HD clutch - Yellowspeed coilovers all around - N15 SSS front brakes with winmax W5 pads - s14 rear disc upgrade + caliper adapter - N15 lower control arms - Weld in Half cage - RPM harness - Cobra seat - S14 T28 turbo - 555cc injectors - Surge + 044 - FMIC - NISTUNE ecu (tuned to 170fwkw on 11psi on ded

RB 25 Engine Spool Conrods & Forged Ross Racing Pistons Nitto RB Oil Gallery Restrictor Kit ARP Main Stud Kit Standard Turbo & ECU Nissan N1 Oil Pump Baffled Sump Winmax Race Brake Pads Skyline Front Calipers 'Direct Clutch' Button Clutch R33 GTS 5 Speed Gearbox Coil Overs 17 x 8.5 Front & 17 x 9.5 Rear Roll Cage with 2 x SAAS Race Seats Used in Sprints

This an ex hill climb car out of NZ. Imported as a roller. Club sprinted with wrx club vic. Sold to me a caged shell. time attack inspired build by myself. Idea was to build then build the aero. Pull it all down, cut weight and clean it up and reassemble for time attack events. Life has got in the way. North Vic engines built ls1. 465rwkw @13psi on 98. Borgwarner s476 turbo T56 w/ ripshifter race ver Extreme 230mm twin disk ceramic clutch Nissan s15 r200 2 way nismo plated diff 355mm fro

2002 Build, upgraded in 2024 full Vic Reg, custom plates included. New roll bar, new SAAS seats, new fuel tank, fuel pump. Ready to drive away. Nissan sr20De motor, 5 speed Nissan Silvia gearbox,

The Vital Statistics Kit Component MFG Harrison Labrador Qld. Kit Purchase Date 4th December 2009 Kit Number # WH 1109 - 102 Engine Number Ford JGCM2M70520 Vin Number 6TP01AAABOAABO14 Registration Approval Date 26th July 2011 Modification Plate S/No 51657 Ref 682050 ICV/ADR compliant plate engine bay. Vehicle Description. Roadster The Iconic Cobra Sports Car THe Dashing looks of the AC cars captivated Carrol Shelby and Ford to come together and produce the car we know as the Cobra. Based on t

1978 Alfa Romeo Alfetta sedan racecar. A very well known and very successful 2.0 car, conceived and built originally by Mike Halasz here in Queensland. Full original build thread available. The sedan shell was used, as it's a slightly longer wheelbase and also quite a bit lighter than the usual coupe GTV Alfetta'shell. We acquired the car about 3 years ago as parts basically and have completely rebuilt it into a very competitive 2.0 car in the Queensland Alfacomp. For 2025, the car is current