SSR Enabled
Australia's #1 Enthusiast & Motorsport Marketplace
Australia's #1 Enthusiast & Motorsport Marketplace

18 SEAT for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

All Results

24
Roll Cage
Subaru Impreza / WRX Track car This purpose built race car is a serious little rocket having been recently upgraded/reworked by Maxx Performance with new engine and lots of good bits. It is currently tuned to 270kw (363whp) on low boost (18-20) and E85, making it strong and reliable but leaving plenty of room for more performance. I have only done track-days with it so it’s not currently log-booked. It has only done a few laps around Phillip Island since recent upgrades. Clean, well built car

Riddells Creek VIC, Australia
Share
Watch
8
Registered
1999 Lexus IS200, now an IS600 with L98 Chev 6 litre V8 (ex VE SS) rebuilt 2022. Lots of info available about internals, but briefly has forged pistons, H beam rods, Crow street cam, tuned to a mild 375 RWHP. T56 transmission with short shifter and IS300 diff. Canton 7 litre baffled sump. Car originally built by Mark Palmer at C Red. Fully registered, engineered and has permits for engine and trans. Willwood 4 piston calipers on front with 323mm Supra TT ventilated discs. Expanded calipers on re

Marmion WA, Australia
Share
Watch
10
Roll Cage
Subaru Impreza h6 is up for sale There is a lot of time gone into this build It has a ez30r h6 swap with a wrx 5 speed gearbox 3.9 ratio The engine is stock and in great cond Its been dynoed and has a nice 183kw at the wheels and sounds great The car has new raptor headers with sports exhaust . Liberty turbo gt front and rear brakes 316x30 front rotors with winmax 5 race pads new momo winged FIA race seat harness in date Ecu is link g4 fury with powertune dash No Subaru wiring all new wiring t

Cressy TAS, Australia
Share
Watch
17
Roll Cage
“Deposit Taken” Regrettable sale of this multiple championship winning car at IWMAC dirt events. Developed by Nick Ashwin at NA Autosport to turn this former Australian delivered street car into a capable circuit racer. I’ve owned this car for 16 years and I’m the second owner with only 125,000 kms. It has been meticulously cared for and maintained and always stored indoors. It has been incredibly reliable and has never let me down while being loads of fun to drive. Perfect setup for Hiilcl

Hope Island QLD, Australia
Share
Watch
20
Roll Cage
Log Book
1996 WRX Log Booked Race Car new motor from subaru STI worked heads, large sump GFE .Motor would be lucky if its done 15 hours Autronic EVL,LDI Ignition ,watre sprayers boost regulator and surge tank 4 pot brakes, braided lines,Race Pads 6 point roll cage cams aproved,Race tech seat ,6 point harness and log booked 17" slicks with 2 spares PAR gearbox Ajustable coilovers,cusco shocks and ajustable white line sway bar fresh profestional paint job ready for sponser decals

Lawnton QLD, Australia
Share
Watch
17
A fun daily driver registered in Qld. I have owned this collectors car since 2010. It has been upgraded in ALL areas to be a reliable track day car in time attack format, while being fun to drive on the street. Quality upgrades by competent workshops have been made to engine, clutch, gear box, suspension and brakes. Many minor upgrades like exhaust gas thermometer EGT and boost guage mounted on A pillar. Cruise control, upgraded seat covers as original worn out. It was my daily driver until reti

Mackay QLD, Australia
Share
Watch
11
Roll Cage
Ford Falcon EL race car, fully stripped interior, cage, race seat, quick release wheel, fuel cell in boot, 6 pot AMG front brakes and 4 pot brembo rear brakes, straight 6, 4lt, fresh 5 speed box. Car used for budget enduro events. Includes spare engine and other mixed spares. Rear brake bias adjustment added.

Bayswater VIC, Australia
Share
Watch
10
Roll Cage
Log Book
2009 WRX (2nd Owner) currently set up for 3J IPRA (Improved Production) at the moment with Log Book & strongly built Bolt In 6 Point Roll Cage installed by Bond's roll cages which competed in NSW IPRA Over 2L in 2025. Selling due to having another project on the go. The spare Garrett GTX3071R Gen 2 Turbo could easily be re-installed to compete in time attacked as its currently running a STI original restricted 39mm Turbo for racing in IPRA. During the last 2.5 years I've owned it, I've conver

Bathurst NSW, Australia
Share
Watch
6
Roll Cage
Up for sale is my 1996 Subaru GC8 rolling shell. Car present well as a good base for someone wanting to convert into circuit racing or rally car. Currently sitting under the lightweight composite bonnet is a 1.8ltr na motor with no gearbox. I do have a gearbox to put into it which will come with the purchase. along with all the drivetrain and brand new DBA T3 rotors and pads. The car is sitting Pedder Extreme coilovers, later model front hubs and larger 17" rims with Toyo semi slicks which have

Malvern East VIC, Australia
Share
Watch
15
Time has come to part ways with our STI Hillclimb Set up vehicle. The vehicle has many hours of development poured into it for handling and performance. (The list is below) NOTE - THIS VEHICLE IS A STAT WRITEOFF and cannot be registered anywhere. (Had minor front end damage, professionally repaired) Just refreshed the engine (New head gaskets, New genuine timing belt kit and water pump) A few years ago the engine had been professionally rebuilt as per below: Engine... EJ257... New case hal

Newcastle NSW, Australia
Share
Watch
8
Roll Cage
Log Book
Historic COD Historic Logbook Group Fa Engine rebuilt only 2 meetings ago. New radiators. Chassis powdercoated with new floor 2022. Spares include set of wheels & tires, body moulds and assorted suspension and engine parts, plus chassis alignment bars. Original Van Diemen seat. Belts OK for 2026 Extensive racing history in the USA. All paperwork included. A great intro to Historic Formula Ford; owner too old & too slow. Must sell!

Benalla VIC, Australia
Share
Watch
7
Roll Cage
2001 SUBARU WRX STI – NO ENGINE The car is currently available as a roller. No engine, but with full running gear and interior as pictured. Some of the modifications and upgrades include.. A reconditioned 6-speed Liberty gearbox with short shift kit, Xtreme 230mm ceramic twin plate clutch and flywheel and all STI running gear, 180 diff, 5 x114.3 hubs ect. Mishimoto Oil cooler, Custom Aluminium radiator, ETS 100mm Intercooler and a Chase Bays power steering unit. The OEM Fuel tank has bee

Bonville NSW, Australia
Share
Watch
10
Roll Cage
Log Book
JDM spec. Subaru WRX STi 2001 has been well built (Rod Dawson) and raced successfully (Brett Peters) in GT-P racing category circa early 2000's. Copy/paste this link to read the Auto Action write up - https://autoaction.com.au/2020/05/08/whats-in-the-workshop-peters-motorsport Since those days it has been moth-balled and tucked away for many years....until now! It needed a big refresh but it is now ready for a new owner and ready to race again. Current log book, category 3J Improved Produ

Kincumber NSW, Australia
Share
Watch
4 1
Roll Cage
Log Book
Gc8 wrx Engines: Milton engines close deck Pinned mains Darton sleeves Manley extreme duty pistons with larger pins Nitto i beam rods Nitto billet 2.5l crank Arp case bolts Arp 14mm headstuds Firelok headgaskets Heads are 99 big Port casting Chambers and ports modified Ferrea comp plus intake and exhaust valves Kelford valve springs Kelford 282 cams Bc adjustable cam gears Rcm high grip tensioner and guide Xtreme twin carbon clutch Rcm auto verdi dry sump Ams intake manifold Id2600xds injectors

Seaford SA, Australia
Share
Watch
16
Registered
Great car, suit new car buyer(Back Seat used Twice, Never Raced, Sunday Driver) I am the only owner from new and waited 8 months to get it. Last of the Ej20 STi's. Every service completed at Subaru, all noted in Log Book. Options: 1. Factory Suede Steering Wheel 2. Short Shift Gear 3. Boot Protector 4. Tower Brace 5. Mat Set Still has new car Warranty. Only travelled 7100 km. This 2020 Subaru WRX is engineered with a 2.5 litre engine and 221.0kW of power!. Check out these safety features: AB

Silver Sands WA, Australia
Share
Watch
9
Roll Cage
Please email to discuss offers Repainted in Mazda yellow Lexan windows Gt carbon fiber wing Carbon fiber wing uprights Carbon fiber front splitter Cds steel weld in roll cage 18x7.5 front 18x9 rear wheels Yokahama advan Ao50 tyres Adjustable front camber arms MCA red coil overs with custom valving and spring rates. Is300 diff and half shaft upgrade Ft86 torsen diff 4.3 Porsche 997 cup car brake upgrade 365mm rotors Circo front pads Project mu rear pads Tilton floor mounted pedal box E

Brendale QLD, Australia
Share
Watch
9
Roll Cage
Log Book
New IAG block with Cosworth heads PPG sequential gearbox, freshly rebuilt PWR Radiator 350mm x 700mm PWR Intercooler 350mm x 700mm Motec ECU Motec Camera DCCD pro diff controller Cusco Coilovers AP racing brakes OMP drivers seat Heated windscreen Perspex windows, sides and rear All custom front and readr subframes and front control arms 2 sets of spare rims Carbon front bar, bonnet, boot and wing Originally built and MA log booked for sports sedans but lately it's been used for time attack eve

Belrose NSW, Australia
Share
Watch
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.

Springwood NSW, Australia
Share
Watch