69 items in Australia for sale

Fully NSW engineered! Great car to drive on quality Mca suspension and full track ready engine work ceramic seals new housings etc. Car is ready to drive and take to the track. Mods listed below It is Australian delivered and the factory turbo model. The motor has only about 1800km on it. Only selling due too not using it enough. -1800km Bridgeport motor all done properly CNC re-nitrated plates. New housings. Ceramic apex seals and dowelled. 330kw at the wheels on only 14psi 98 fuel - Fu

Turn key Competitive RX8 Cup car or Formula RX8 car. that has been well maintained. The car is race ready and has recently been prepared. Suitable for anyone wanting to step straight into the a one make category with a competitive car. Setup and had extensive mechanical work by Stiaan Kriel last years RX8 Cup winner, To bring the car up to spec. Engine - 3 Race meetings old (Ric Shaw Performance) - Microtech Dash Display - Dyno'd by Roland Wankel Garage - Twin engine oil coolers - Racing pull

One-owner 2007 HSV GTS E-Series combining collector-grade history with professionally engineered, street-legal performance. Purchased new and meticulously maintained for almost two decades, this GTS comes complete with its original bill of sale, logbooks, HSV owner’s compendium and Build Number Certification. Underneath is a fully forged, supercharged 408ci package engineered by Sam’s Performance and Walkinshaw Racing. Producing approximately 850hp at the flywheel and 1,200Nm of torque, it del

I am selling a 2015 MX5 ND to be used as a race car. This car is a stat write off. 1.5 L. 6 speed automatic perfect for motorkanah Minimal damage , it has a broken windscreen and a dent in the bonnet 47,000 klm

Ve r8 clubsport 6.2 manual caged Motorsport Australia approved have sticker Was started as production car build Could be raced in Qtcc replica tourers sprints commodore challenge Has factory big brakes Stainless headers and exhaust Also come with a set of koyos 18x10 Could be transported to Brisbane if needed

Mazda BT50, New fully race machined 20B triple rotor, t400 auto with all new internals by Peter Wileman, new Strange Ultra diff, 42 spline axles. New Master cylinders, rotors and pads. New bushed throughout front end. A couple of small things to finish off. Approx. 600 hp on a mild tune with 6lb boost. Plenty left to increase. New tyres. Also a 1986 twin cab Isuzu transporter that the fits into (wide track-2200mm). turbo motor (approx 220hp) and 6 spd o/drive box. Good for 130kph. 3 new axles

A rare opportunity to purchase one of Australia’s most successful and proven Top Sportsman race cars. Specifications * 584ci Big Block Chevrolet * Over 1,200hp * Brodix Block * Profiler Heads * Powerglide Transmission * Transmission fully rebuilt 10 months ago * A1 Performance bolt-together converter * Spare stator included for high-altitude racing * Twin parachutes * Delta One wheels (over $12,000 replacement cost) * Racepak V300SD data logger with full sensor package Engine Freshen-Up The

Mx5 RACE CAR 1991 NA THIS VERY WELL KNOW RACE CAR IS NOW FOR SALE. 2B LOG BOOKED EVEN THOUGH THE CAR HAS BEEN AROUND FOR A LONG TIME IT IS NOT AN OLD CAR. APART FROM BODY PANELS, VIRTUALLY EVERYTHING HAS BEEN REPLACED AND / OR UPGRADED AS PART OF AN EXTENSIVE MAINTENENCE SCHEDULE. OURRIGHT WINNER OF THE CUE ENDURO SERIES MANY CLASS WINS INCLUDING LAKESIDE, QUEENSLAND RACEWAY, MORGAN PARK AND PHILLIP ISLAND. ALSO RACED AT BATHURST. VIDEOS AVAILABLE FOR ALL CIRCITS. ENGINE LAST FULL REBUILT IN 2

Rainbow Warrior Piece of racing History. Car 1 of 2, 808 coupes built into rx3 by Terry Lewis for IPRA in 90’s. Only surviving race car of the 2. Fresh built 13B Bridgeport using brand new housings. 1 race meeting since rebuilt. Injection Perfection throttle body Haltech Elite 1500 S5 rx7 box with Albins close ratio gear set. Mazda LSD Bond Alloy roll cage 14” globe wheels Well set up race car that is a blast to drive. Body is not perfect but presents well with minor rust in engine bay

Original engine, still running strong Always warmed up before driving Only BP 98 260kW @ 16psi MODS Performance COBB Accessport COBB Front Mount Intercooler Tial External Wastegate CorkSport HPFP CST4 Turbo (EWG setup) CorkSport 3” Intake + 3.5” MAP Sensor CorkSport 3.5” Turbo-back Exhaust (with downpipe) CorkSport Boost Control Solenoid CorkSport Oil Catch Can Handling D2 Coilovers Whiteline Sway Bar Kit Whiteline Lower Control Arms Whiteline Engine Mount Hardrace Mount Pack Transmission BL

Targa-Spec Mazda MX-5 | 2.5L Engine Upgrade Road-registered and stage-ready. This MX-5 was built in 2022 specifically for Targa Tasmania, centered around a high-torque engine conversion that eliminates the limitations of the stock powerplant. The Build: 2.5L Performance - Engine: Upgraded Mazda 2.5L swap, professionally tuned for reliability and stage performance. - Suspension: Full Pedders Adjustable coilovers. - Wheels/Tyres: 17x8-inch wheels with Nankang CRS (50% wear). - Capability: Signifi

Yacar 750cc gsxr crosskart turn key ready to go MA logbooked fully adjustable suspension and arms gear select display tarmac and gravel set up located in Perth. can assist with shipping if needed. call for more

I'm listing up my 2005 Mazda RX8 - 6 speed manual for a regretful sale. This is a fantastic car for fun tarmac rally, circuit, or just drive it on the road. It is still fully road registered (not club etc) and if desired you could return it back to factory spec. I deliberately kept the build modest so future owners could return things to original, or go wild and continue to build. I would love to keep this car; but the reality is that it sits in the shed all but 7 days a year. I have another R

An original 1973 10A RX‐3 sedan that had been looked after, very nice car to drive with an honest body, this one is ready to enjoy - it’s a street‐friendly rotary package. Originally imported to New Zealand from Japan and then here to Australia 4 years ago by myself. 13b Bridgeport, rx4 block, Ida 48mm, rx7 gearbox 5 speed, Extractors, exhaust upgraded, adjustable front suspension with adjustable camber plates, lowering blocks in the back and an LSD differential. The interior is mainly orig

Chassis #16. Raced in the Australian AF2 Championship in '74 to '76 by Chas. Talbot and presented now as raced by Graham Baker in the '77 Peter Stuyvesant Formula Pacific Championship in New Zealand. Current Group Q Log Book and C.O.D. Fitted with a low mileage Cosworth BDD and rebuilt FT200 with 16 spare ratios. Less than 3 hours running since a ground up restoration, including all new rod ends, dampers, c.v.'s, axles, pumps, battery, instruments - everything! Comes with a set of replica 3-

1990 Series 5 rx7 - Aussie delivered Cams Log booked Original books and history Set up for tarmac sprint 13B turbo Microtech ECU Approx 400 HP Recent compression test available BC coil overs Strut braces Full cage with removable front section Fibre glass vented bonnet Terratrip ( never used it ) Comes with spares Ready to go racing Very fast, very reliable Could be returned to the street if you had the time and some interior pieces Great for someone that wants to get out there and

Price massively reduced... 1979 Mazda 323 rwd 2-door rolling chassis. Last raced in Improved Production in 2022, it is set up with engine mounts for a Mazda BP engine. Would be an easy rotary swap if desired. Motorsport Australia log booked 3J (first raced in 2020). Extensive but lightweight cage built by Craig Wildridge, including bars through to the front strut towers. Double adjustable dampers by Suspension Concepts, with RaceProducts full cambered floating diff (28 spline RX4/S2000 cen

I have for sale or lease, With Out doubt 4 of the best built Mazda Rx8 production race cars available. All cars have had podiums, some have & had lap records with 60+ driver. All Free components have been made to the max. All new components are best of the best incl fluids i.e. Ryan Rotary coils, Radiators PWR or similar. All new cars have bugs & now sorted & now ready to go. All have my fresh Engines, Gearbox, diffs. All are capable of winning a championship and for those who lease a car I’ve

Selling my FC RX7 to make way for the next thing... Mechanical: 13B-REW Conversion, semi bridgeport by 3S Garage Rotors tip clearanced, block studded w/dowel mods Compression tested on 22/12/2025 (R1 psi 115/117/117, R2 psi 120/120/118) PSR G40-900 on Artec Manifold with thermocouples added Turbosmart 50mm wastegate IGN1A coils, Radium rails/1650cc injectors Custom crank trigger ECU controlled electric water pump 3.5" exhaust into twin 3", 3x AES mufflers with ecu controlled exhaust valve All p

Built in March 79 the car now has a Larry Kogge built 13bbp running a 48ida new Spanish type Weber bought from Weber sales agent in Australia set up for a 13bbp. I bought the engine of a guy who always turned it over and kept it oiled up said to have done just over 1000k's. Larry raced touring cars and new his way around rotaries back in the day to my understanding. looking the intake runners id love to see in this engine some more. Series 1 box I believe and and standard rear end to be honest