44 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
6
Ideal start for your track project. The BMW is in very good condition rust and damage free. It needs an engine rebuild with suspected rod bearing damage. Rebuild it or engine swap. Car is in Newcastle and whilst it runs it will need to be towed.
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.
15
Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
10
Unfinished BMW 2 Door Coupe sports sedan project Rocket Bunny Wide Body Kit fitted Ebay Coil overs New Rear adjustable camber arms ( Not Fitted) Hillside Motor sport Chassis Reinforcement kit front and rear Big Lock steering kit Hydraulic hand brake ( Not fitted) LS Engine plate and T56 gearbox mounts fitted ready for motor and gearbox NO MOTOR OR GEARBOX WITH SALE New 38 Litre Fuel cell and surge tank fitted Sound deadening removed Headlights and tail lights in box supplied with car Still have
15 1
Roll Cage
E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to
24
Roll CageLog Book
Well sorted,highly competitive Group NC HTC.nothing to spend.comprehensive spare parts package.Dyno tuned Korman spare race engine with manifold and carbies,six sets of wheels 13x6 and 13x7.5 speed gertrag gearbox and tailshaft to change car to five speed.spare close ratio four speed gearbox,spare panels,radiator,two lsd differentials 4:4 4:8..list parts available on request.car is available with spares minus spare race motor for $40,000.spare race motor available seperately for $18,000. .
18
Roll Cage
E36 coupe S50 B32 M3 motor, Zf 5 speed, locked diff ,Tilton clutch, two sets of 17 “ wheels, one brand new set of Yokohama AO50s, Ford front brakes, new AGI bolt in 6pt cage, power steering, swirl pot, thermo fan, Craig Davies thermo switch, just getting log booked. Times on Nankangs and Federals: Phillip Island -1.49.7 Sandown 1.21.9 Would get better times with the AO50s, photos help description.
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
7
Roll CageLog Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car
8
Roll CageLog Book
Honda Integra 1998 type R Honda Integra supercharged. built by BYP racing with every intention to be a front running car. Built to mirror their winning white integra but with a few more extra bells and whistles. Motec dash- Hondata ecu Electric powersteering to much to list... Any inquiries or questions please don’t hesitate call or txt BYP Racing Built K24 Engine Long Block K24 Block Core and K24A3 crank BYP CSS Block Prep Cylinder Support and O Ring Manley H Beam K24 Forged
8
This BMW race car was built to a very high standard by Karl Begg in 2016, and then subsequently maintained and improved by Garth Walden and his gun team at GWR Australia continuously since my purchase from KB in 2017. Car has had an easy run under my ownership, competing only in the NSW PTC state championship from 2018 through to 2023 - with reduced appearances in the Covid affected years. Won B2 Class and second in the club championship in NSW PTC 2023. Very quick car in the right hands.
8
M3 // 04 GENUINE E46 M3 MANUAL 6 SPEED MA LOG BOOK. NATIONAL SPEC WELD IN ROLLCAGE. 9.5x18 race wheels, Yellowspeed c/overs, new factory clutch flywheel assembly, CSF upgrade oil cooler, Circo race pads. Production Car spec. A lovely road car prior to conversion. These rare cars are climbing in value being the last of the blistering 3.2 famous 6 cylinder. Best value M3 available.
9
Roll CageLog Book
Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts
15
Roll CageLog Book
2016 BMW M3 build by and purchased from Bruce Lynton Service team prior to 2022 Bathurst 6hour which was this cars first race and placed 4th in class. It has also won the 2022 Australian Production Car Championship. The car has been built and serviced with no expense spared and constantly developed to be a very competitive and reliable package as proven by its race results. Car Qualified on the front row for 2023 Bathurst 6hr and finished P2 only 2.7 seconds behind the winner. Car is fully pre
15 1
Roll CageLog Book
I have for sale my BMW M4 3E Production Race Car (No longer includes Bathurst Entry) Many wins and 3rd in 2023 Bathurst 6HR, only 4 seconds off the winner after 6 hrs of racing. This car is very competitive and a must-have if you want a chance to win the Bathurst 6HR or want to run NSW/QLD State Series or APC. Years of development work and more money than I can remember creating a very reliable race car. Strict maintenance records and race data can be provided. The car can be sold as is or as a