64 items for sale

Honda crx delsol. B16a2 fully rebuilt with 20tho over 13:1 carillo forged pistons and rods, acl race bearings, cosmetic mls head gasket, crank shaft crack tested and polished, block bored, torque honed and decked. New high volume oil pump and morosso large capacity sump. Pcv delete kit fitted with custom made catch can and large lines and an fittings . Head is ported with kelford cams, kelford adjustable cam gears, kelford valve springs and retainers and runs a custom made intake manifold with 4

1969 Mazda R100 Rotary Historic Sports Sedan. Based on Australian Delivered R100 - VIN M10A-28786 A Significant piece of Aust. Sports Sedan and Mazda racing history. Early history: Neville Cherry built in 1977 & raced in Tasmanian. Raced in Sports Sedans and was the quickest under 3Lt Sports Sedan holding lap records till 1981, when beaten by Allen Grice’s JPS BMW Sports Sedan. In 1982 car was sold to Fred Munday who raced in the Victorian Sports Sedan Championship, Larry Kogge continued

Improved Production RX3. It has a 13B bridge port (250hp at the wheel), quad throttle bodies, motec injection with full logging (lambda on both rotors which makes it easier to pick up an issue before it becomes a problem). I have not had a failure for 10 years. The motor is out getting a freshen up. I have 5.5, 5.3, 5.1, 4.7, 4.5 diff ratios. rear end is a hilux with 2 deg floater kits and bullet drilled floater axles. Carbon fibre tail shaft. Wilwood brakes. MCA gold, 3 way adjustable shocks,

For Sale 1990 Honda CRX Si D16a8 Engine (1.6L) Extractors into Straight Though Thick Wall Pipe with hotdog and muffler 5 speed Manual Log booked 6-point Roll cage Sparco Drivers Seat - No Passenger seat included with sale Sparco Harness Terra trip Rally meter with foot reset pedal Rally safe wiring all installed + Mounts DMS Gravel Suspension Hard race Camber arms front and rear 2 round old Dunlop Tyres + Another set of Honda Rims and 3 Brand New Kumho Muds New rotors + pads + Braided Lines all

Mazda BT50, New fully race machined 20B triple rotor, t400 auto with all new internals by Peter Wileman, new Strange Ultra diff, 42 spline axles. New Master cylinders, rotors and pads. New bushed throughout front end. A couple of small things to finish off. Approx. 600 hp on a mild tune with 6lb boost. Plenty left to increase.New tyres. Also a 1986 twin cab Isuzu transporter that the fits into (wide track-2200mm). turbo motor (approx 220hp) and 6 spd o/drive box. Good for 130kph. 3 new axles all

A recent round winner at Winton Raceway winning 4 from 4 races and setting a new class record. Famously raced in the 1984 Bathurst 1000 by Tony Kavich and Phil Alexander, this striking Yellow Pages livery has attracted a strong following. Extensively rebuilt over the past two years by Carey McMahon and Nigel Bolling, this RX7 debuted at the Phillip Island Classic 6-9 March 2025 and qualified 4th on the grid with a stunning lap time. It was the quickest RX7 in the field. The car is superbly fast,

Hi, Selling this beautiful RX7 which offers so much. The car is IPRA log booked and has only completed an extremely low number of events and a handful of practice sessions etc. Fully seam welded chassis to specification Adjustable springs all round (Eibach) Noltec adjustable spring upper mounts Custom fabricated Watts link rear Adjustable stabiliser bars Series 3 diff and axles but with a Mazda Factory Racing LSD diff centre Alloy foam filled fuel cell Front Brakes 296x28mm 5000 rotors with Will

Hi, For sale is my EG Civic track car. Selling as I have no time to finish it and need the floor space in the shed! - has a very nice fully TIG welded 6 point CAMS schedule J spec cage, see pictures - D16A8 engine with manual gearbox, comes with brand new engine mount kit to K swap (this was my plan for the car however engine was running fine before the cage build) - Mini light 13” rims with adapter spacers with formula ford Yokohama semi slicks mounted (cheap very good quality race tires read

2007 Honda Civic FN2 Type R Deputy 4 Hr car -Engine has had a top end rebuild -Rebuilt gearbox -Cusco LSD diff -Exedy Clutch -6 point AGI bolt in Roll Cage -6 point harness -Sparco Corsa racing seat -Brake ducts with custom backing plates to suit. -BC Coilovers -Project MU pads front and rear with T4 DBA rotors -Spare set of wheels The car was purchased as a write off and has now been converted into a deputy 4 hour race, could easily be log booked and ran in 3E production cars, or could be r

Never ever driven , been in garage for 18 years since being built . Never been crashed or in any accidents Absolutely immaculate .everything new .blue/silver purple pearl paint . Full white leather interior 116k kilometres , full kmac suspension,bbs wheels, comes with spare motor and turbo kit ready to install To much to list

Genuine Group N Mazda 323 GT-Ae with WRC History Offering a rare opportunity to own a piece of Australian rally history. This is a genuine Group N Mazda 323 GT-Ae, with documented WRC heritage and an impressive competition record: Two-time SA State Rally Champion National Motorkhana Champion (Outright) Multiple other state titles P6 ARC Rally Champion (~1999) Built to compete at the highest level, this car includes exclusive features: One-off Kevlar underbody protection by Rod Millen (as per

$30,000 ONO Formula RX8- Top 5 running car for sale Comes with 4 new Hancook tyres Will comply with Formula RX8 Rules and with a few parts changed could be RX8 cup compliant. Speedy Rims on the car plus an extra 5 The national spec roll cage welded in to comply with the new roll cage regulations Motorsport Australia logbooked 2 Rolling shells come with

QLD Time Attack series winning car 3yrs in a row. $19500 ONO for a quick sale. This car has won the PC1 (Performance class under 2L) Time Attack for Queensland 3yrs in a row in for both the QR and Duel Track series. The car remains undefeated despite some healthy competition. Australian delivered and the 1st CAMS log booked MX5 in QLD, originally built to be fully compliant and raced in 2F. The car can easily be reverted to 2F compliant. Can be road registered and has relevant engineering QLD mo

Raced in Production Sport Qld in 2F category. Absolutely beautiful car to race. Full race prepped engine: Billet cam shafts, Vernier timing gears, Ported and Polished Head, Block Decked, I Beam Con Rods, CP Pistons, Light-weight steel crankshafts, std ACI race bearings. too many to mention here. Avo coilovers, Fulcrum racing bushes and setup to improve stance This car was imported direct from Japan. since acquiring it I have done or had done all the necessary work to make this car race fit.

Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car

mazda series 5 RX7 2F sports car / sports sedan log booked turbocharged 13B , Ambrose rebuilt engine , e85 or retune for 98,motec m84 ecu with data logging,full supercar style cage,floating front rotors and 6 spot calipers,adjustable suspension,fibreglass front and rear guards, 1109 kg race ready,18x10 and 18 x12 wheels pirelli slicks, car was owned by Richard bendall (motec) super car type wiring harness, great track car, or turn into a drift car, hill climb car,$45000. Great car to drive

Mazda RX8 group 3E production car, cams logbook, front running car in Formula RX8 and RX8 Cup, with plenty of first and second place podiums, Car has a new motor, only done one race meeting since rebuild, gearbox and diff also good and also been rebuilt. Car can come with, two way radio communications on a private channel, and an additional parts list, wheels, painted body panels, various Mazda Rx 8 parts new and used, there is just too much to list. This is a very well built and maintained race

Built from a very clean & straight white EG Civic using the following quality parts: - 6-point welded roll cage (signed documentation for CAMS approval) - Cage and interior freshly painted - 15x9 front & 15x8 rear 949 Racing 6UL Wheels (Charcoal) - Toyo R888R Tyres (225/50/15) - GAB SSR Series Racing Coilovers - Carbon bonnet, boot & custom door cards - PCI Racing Wing - PCI Side Skirts - ACW Motorsport Plastics polycarbonate window kit (slider in driver's window + rear window vent) - FCS Race F

Selling this beast of a car as I’m moving onto a 996 Cup car I have owned this car for little over 4 years now and it have served me perfectly, first couple years it was just a very basic weekender before I decided to turn it into the car it is today. The car has been very enjoyable to drive, only reason for sale is as said above, moving onto a full track focused car, otherwise I would not be selling this, it’s an unbelievably reliable car, serviced after every event, anyone that knows me know