SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

22 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

All Results

14
Registered
1999 Honda Civic EK GLI, with K20Z1 out of a (DC5 Type S) - The Ultimate Street/Track Civic in Immaculate Condition - Proper build with all quality parts - The entire build is only approx 350km old - All parts purchased brand new - Looked after, Built & tuned by BYP - K20Z1 Registered to the car - Currently tuned to a 147kw at the wheels. No corners cut during the build from paint/panel done by Mesiti Bodyworks to all the mechanical by BYP. The intention of the build was to have a high-qualit

Gregory Hills NSW, Australia
Share
Watch
10
track car all wheel drive built for pheasant deputy 4 hr series aasa log book 2 sets of wheels radio intercom new clutch fitted new timing belt race brake pads cheap track car also suitable for production car racing

Ingleburn NSW, Australia
Share
Watch
6
Roll Cage
Ideal sprint/hillclimb car with freshly modified and dry sumped 3.8 litre Magna V6,fresh gearbox and LSD with 4.11 ratio. Electric power steering, BC racing HD struts and springs, 380 brakes & modified suspension. Half cage with intrusion bars, 6 pt harness and 17x9 lightweight wheels. Too many features to mention. Awesome car to drive, 1.17 flat at Mallala ,50.36 Backbone hill climb with 70 y.o driver. Plenty of improvement left......reluctant sale at $22000......cost more than that in parts.

Reynella SA, Australia
Share
Watch
8
2004 Subaru Forester This was our shops hill climb/super sprint project but due to our current racing we are short on time to finish. Car is running, driving and operates fully. Interior stripped, racing seat and harnesses fitted, harness bar Fuel surge system installed BC Racing coil over kit installed 4/2 pot brake WRX calliper kit with associated bracketry to install supplied, modifications have been carried out to fit the kit, just needs instillation. 17 inch WRX light weight wheels wit

Cooks Hill NSW, Australia
Share
Watch
15
Roll Cage
Log Book
For Sale is my Evo 7 RS fully serviced and tuned by Insight Motorsport in Sydney. Everything has been checked, refurbished or near new. Significant $$ has been spent on the vehicle with extensive weight reduction. Race weight with all fluids and approximately half fuel is 1305Kgs. Eligible for many race series. Power is 390kw at all 4 Wheels at 28 psi (E85) Also Tuned at 316kw at all 4 wheels on 23 psi (E85) Car is painted not wrapped. Car has Log books. No accident history! Engine: 2.

Panania NSW, Australia
Share
Watch
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to

Kanwal NSW, Australia
Share
Watch
12
Roll Cage
Log Book
Group 3E Production touring car....2023 Australian Production Car Championship A1 Class winning car. Just completed 4 from 4 wins at recent Bathurst International. Engine 1 meeting old...comes with comprehensive spares package including panels , long engine , and gearbox. 12 wheels and tyres, new unused AP Rotors, pad sets, springs suspension and driveline parts. Car was completely customed wired at beginning of 2023 season along with new Motec PDM's and Dash at a cost of $40K. New 6 spot AP Ra

Parramatta NSW, Australia
Share
Watch
16
Registered
Roll Cage
Ready to race and built for Circuit Racing and Time Attack, this is one of SA's fastest Evos! Or if you're looking for a very tough streetcar, it's fully road registered, and in a couple hours you can swap over to the street parts and drive it every day. You're basically getting 2 cars in one depending on what you want to do with it. It's won SA Time Attack trophies in every event it's ever entered. Fresh built 2.35 Stroker with only 100kms since rebuild. Making 377kw @ 32psi on e85 track tun

Park Holme SA, Australia
Share
Watch
8
Roll Cage
Log Book
Honda Integra 1998 type R Honda Integra supercharged. built by BYP racing with every intention to be a front running car. Built to mirror their winning white integra but with a few more extra bells and whistles. Motec dash- Hondata ecu Electric powersteering to much to list... Any inquiries or questions please don’t hesitate call or txt BYP Racing Built K24 Engine Long Block K24 Block Core and K24A3 crank BYP CSS Block Prep Cylinder Support and O Ring Manley H Beam K24 Forged

Sydney NSW, Australia
Share
Watch
10
Amazing beginner race car! Mitsubishi CE Lancer 1.5L This is very much a regretful sale but life has other plans. The car was originally set up to run nugget nationals in Melbourne but I bought it and shipped it over to SA to use it as a budget regularity car. It has never let me down and has preformed flawlessly. When I bought the car, it had a brand new engine installed, it had been completely stripped of all unnecessary weight ie aircon heater interior anything that will weigh it down. Th

Davoren Park SA, Australia
Share
Watch
9
Was $15,500$14,500
Roll Cage
Log Book
Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts

Oatley NSW, Australia
Share
Watch
10
Roll Cage
THE 2023 DEPUTY 4 hr ENDURANCE CHAMPIONSHIP WINNING SUBARU IMPEZA IS UP FOR GRABS. UNMODIFIED FROM ITS WIN. Round 1 .1st place Round 2 .1st place Round 3 .3rd place Round 4 .2nd place Round 5 .1 st place Round 6 .14th place Round 7 .2nd place Round 8 .3rd place BUILT TO RUN SPECIFICALLY AT PHESANT WOOD CIRCUIT IN THE DEPUTY 4 hr enduros .. IT ALSO TOOK OUT THE 2023 SUMMER SERIES Round 1. 3x1st and a 2nd place. Round 2. 2x 1st and 2 x 2nd place. Round 3. 4 x 1st places. The car has proven re

Wamberal NSW, Australia
Share
Watch
9
Roll Cage
Log Book
New IAG block with Cosworth heads PPG sequential gearbox, freshly rebuilt PWR Radiator 350mm x 700mm PWR Intercooler 350mm x 700mm Motec ECU Motec Camera DCCD pro diff controller Cusco Coilovers AP racing brakes OMP drivers seat Heated windscreen Perspex windows, sides and rear All custom subframes and front control arms 3 sets of wheels with a new set of soft Michelin Slicks Carbon front bar, bonnet, boot and wing Originally built for sports sedans but lately it's been used for time attack eve

Belrose NSW, Australia
Share
Watch
10
Registered
Roll Cage
MY03 STI Tarmac Hill Climb / Circuit Sprint Car Built to be reliable and fast • Aust Delivered MY03 STI • 207,000kms • Handbook Serviced and Upgraded at S&J Automotive o MRT S/S Turbo Back Exhaust o MRT 500HP Fuel Pump o S&J VVT Upgrade o EcuTeK Type 3 Custom Dyno Tuned with 210kw ATW o Rota 18 x 8.5” Wheels o Federal R-Specs 235/40 R18 o Half Cage o Harnesses o new Extreme competition clutch o Cusco Brake Support Bracket o Perrin Wing Stabilisers o Coil over suspension A very c

Cadell SA, Australia
Share
Watch
19
Roll Cage
Subaru WRX GD Hawkeye Tuned by STI Great car ready to drive nothing to spend Pictures tell the story original km as per photo Basically standard engine timing belt kit done including all pulleys and water pump Has STI top mount intercooler and pod air filter with aluminium radiator Brand new Rota gravel wheels 18inch with brand new Nanking AR1 tyres 225/40/18 Band new aftermarket Brakes 6 pot front 355 mm discs 4 pot rear 355 mm discs Full Invidia 3 inch system turbo back Brand new Sparco ci

Sydney NSW, Australia
Share
Watch
7
Lancer EVO 9. Great race car, used for aonly a few track days and completed 2 x races since ownership. Given other cars and other commitments, the car has sat since last race and is now for sale. Car is log booked as production touring car 3E and ready for new owner to race reliably, the car is a quick, reliable and well appointed race car. All necessary services and maintenance completed by high level race mechanics and never expense spared for any required works. Selling with lots of spar

Caringbah NSW, Australia
Share
Watch
14 1
Roll Cage
Log Book
Honda Integra DC5 Type R – Production Touring car Extensive history with Bathurst 12 hour class victories, Amchamps class victories and State class victories to its credit. Clean car and maintained (to a high standard) more than it is driven. Originally built from a brand new 0klm shell by Conroy Motorsport, it is a satisfying car to drive and makes a noise that would put a smile on anybodies face! This is a highly competitive car in its class, and would make an exceptional base for the Bathurst

Tuggerawong NSW, Australia
Share
Watch
5
Roll Cage
Log Book
This vehicle is arguably the #1 Hillclimb Subaru in Australia. Winning 3 Australian Hillclimb Titles, 3 NSW Hillclimb Titles, 2 Qld Hillclimb titles and numerous club Hillclimb championships. Additionally the vehicle came 2nd outright for the 2021/22 Whiteline Tarmac Rallysprint Series. Vehicle built by Blake Engineering, is a 2006 Subaru Impreza WRX. Runnings a 450kwatw Deshelle built engine, currently tuned @ 341kw with bucket load of torque. EFR 7163 turbo, Haltech Elite ECU, wideband and das

Kurri Kurri NSW, Australia
Share
Watch
14 1
Roll Cage
Log Book
EDITED 2/5/2024 1993 Honda Civic EG5 hatchback, logbooked as 3J Improved Production. Fitted with B16B Type-R 1.6 litre engine and Type-R S80 five-speed gearbox with 1.5-way Kaaz LSD. Raced for the last three seasons in IPRA NSW Under 2-Litre, as well as various other events. Audited at recent MA round at SMSP (passed). Built to be fun to drive, easy to work on and affordable to run. Regularly serviced and maintained by professional race workshop. Spec highlights; *EG5 shell, sunroof remove

Balgownie NSW, Australia
Share
Watch
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.

Springwood NSW, Australia
Share
Watch