48 Road, Drift & Performance for sale

1 Owner 49,**** Kms Race Red 6 Speed Manual Herrod Performance - Compliance Pack 670HP @ the Flywheel (minimum) Roush/Ford Racing R2300 2.3L TVS Supercharger Large Air-to-Water Intercooler System Oversized, Full-Face Low Temperature Heat Exchanger Degas Bottle High-Flow Rate Fuel Injectors Custom Aluminum Fuel Rail Formed Molded Hoses Twin 60mm Throttle Body with Matching Spacer Custom Cold Air Induction System Washable, High-Flow Dry Air Filter Heavy-Duty, First Sheave FEAD System Roush/Ford R

1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Up for sale is our Corolla KE70, aka Nana-Spec, project car 4A-GE motor (originally out of MR2) ECU and wiring is completed Motor runs (needs the return fuel line back to the tank to be plumbed up) Hydraulic clutch installed, needs to be bled Surge tank and pump installed New exhaust system Original paintwork and interior Minor rust in lower rear outer quarter panel and front edge of bonnet, and small amount of panel work required Clean chassis and underneath Selling due to not having enough

Project car regrettably up for sale 4AGE-ZE motor with LA3 mod plate Cast iron Celica 5-speed gearbox Shortened Hilux diff 15” Simmons wheels Front mounted intercooler behind bar Very clean underneath, no rust in chassis Interior mostly complete, missing a couple of mouldings in boot area Exterior in good condition, a couple of small rust spots, nothing major Motor not currently running Will require ECU and partial rewire Selling due to not having enough time - have had the car for 8 years

Great car that has had hundreds of hours put into it over 15 years making it a competitive club car, with extensive work done to suspension, brakes, engine, etc, it has won its class at several hillclimbs. The 351 cleveland has done les than 10,000kms and has all quality components and has been built to last with,forged pistons and rods, sleeved lifter bores for the solid roller cam , 10 litres of oil capacity with high energy sump and an accusump, amongst other modifications. Most suspension

Good track car for the road. My daily drive. Auto box. Nissan high performance, naturally aspirated engine, with handling to match. New engine, 4000cc engine with less than 10,000 kms on it. No nicks, no dents, no scratches -- immaculate! Inside and out; and under the hood. This car has never done a burnout or laid any rubber; never been on the track. Lots of power -- especially torque. Good set of Pirellis with some time left on them. Very noisy when provoked. Custom leather interior plus a

Hi all, this is my 2016 for mustang gt supercharged no money has been spared with this beast, this car has been a weekend car and garaged all the time and has 34 000kms. This car is more of a weekend car for me also still has almost a years rego, car is making around 450kw at the rears capable of much more. By intune motorsports. Car is running on pump 98. Mod list Harrop TVS 2300 supercharcher kit with all running gear. mantic twin plate clutch (comfortable for everyday usage) Custom ex

2002 Nissan Skyline R34 GTR MSPEC tuned by Full Stage Japan HKS STEGE III 2.8L STROKER KIT GT2530 x 2 EVC F-COM NEW GEAR BOX (GETRAG) CARBON TRIPLE PLATES CLUTCH IKEYA FORMULA LOWER ARM INJECTORS FUEL DELIVERY FUEL COLLECTOR TANK ARC RADIATOR FRONT INTER COOLER TRUST MUFFLER CARBON DOORS CARBON BONNET CARBON LID DRY CARBON REAR WING ENDRESS BRAKE CALIPER (MONO BLOCK) NISMO METER BOOST 1.2 550 ~ 580 PS BOOST 1.7 600 ~ 630 PS Only ran 300kms after the engine build Car is still in Japan $180,0

Turn Key Racing Built RB26 engine with mild cams, custom piping (Titanium Intake). Moderated tune to 586hp RW on e85. Well sorted and proven track car with major suspension component and brake upgrades. Has current Qld Club rego (with Mod Plate). Limited Sprint use only (Lakeside/Morgan Park/ Bathurst). Car has performance well beyond its aging owner but due to retirement (Read No Income) needs a new life. Have a full list of what has been done on this car for those with serious interest.

Nissan Skyline R32 GT-R RB26 DETT, March 1994, 131300 km, Paint is in very good condition, New Tyres, New rear coil over shocks, New Battery, New injectors, New coil harness, New crank angle sensor, New Alternator, New fan belts, Full service, New clutch slave cylinder, Disk brake grind with new pads, New alternator,

***price drop*** 3 litred 1996 R33 GTS-t s2 I have owned the car for 15 years in which time it's sadly seen minimal use. Made approx 350rwkw last week on run in tune at only 13psi on pump fuel. Fresh engine, ground up forged 3 litre build. Less than 1,000km. Ready for e85 and boost. Z32 5 speed. All custom arms and mondified subframe. Original interior for the vehicle re installed with no peices missing except a leather gear boot. Car will have full detail and stickers removed for handove

DESCRIPTION: Nissan R32 Skyline GT-R, Year: 1989 Powerful neck snapping performance ! 2-Door Coupe, All wheel drive Odometer: Indicating 127,512 Klms Engine: 2.8 Lt Turbo, Transmission: 5-Speed Manual, Grey Seats x 4. Currently tuned to be “run in” with new engine build by C - Red in Perth and built to performance specifications. Roll Cage Engineered in NSW by Phil Scoll – Automotive Consulting – as a Modified Production Vehicle. Work carried out by Peter Hopkins of Advan Performance.

2017 Supercharged Ford Mustang. 9500kms. Edelbrock supercharger. Contact for any details.

This was originally a v8 limited Soarer, so it has all the electrical comfort features. It has been resprayed the original black and had paint correction so the finish is like glass. It has a KBD polyurethane kit, with a Sebon Carbon bonnet and Origan carbon roof lip. Rolling on work XT7R 19x9.5 and 19x11 with Kumho PS71 front tyres and Valino Pergea 08RS Rears. It has Willwood brakes 6 piston front and 4 piston rear (stops on a dime), with Shockwoks coilovers all round. Rear-end has all adjusta

Whether you are looking to race or register, this Nissan 180SX represents a unique opportunity to get your hands on a truly special piece of automotive engineering. Built with an open chequebook by the Wizards at 'ARE' back in the mid 2000's, this car was designed to destroy just about anything at a dyno compettiton with its LC Engineering Toyota 3RZ under bonnet, turning out a truly astonishing 782hp atw on a mere 29PSI of boost. The engine was designed and built to run up to 50psi, so you ca