20 Mazda for sale

I’ve owned this car since April, through my period of ownership I have turned the car into a reliable, fast, cheap to maintain and easy to use road/track car. In its current guise the car weighs 1050kg with a full tank. I’ve done 4000km on road and one track day at haunted hills where it covered 40 laps and drove home fault free. I have replaced/modified the following - Fitted a pair of WRX front seats. (Bolt in/out and are on sliding rails.) -Modified airbox with cold air feed. - 4x tyres T

Mazda MX5 NA 2F Production Sports Car. Old Ash Lowe Car. Engine orginallly built by Gary Stewart. Cage MA approved and car is logbooked. Motor has been rebuilt with head freshened, new bottom end and complete seal of seals and gaskets. Has been retuned now with a haltac platinum sport ECU with 195HP on hub dyno (was and old haltec E8). Car has has new seat, belts, extinquisher, radiator, TEIN mono racing coilovers and coilpacks along with the fresh rebuild and retune. Car comes with spare

Unfortunately the time has come to part ways with the Centreline Silver Bullet. The car has had no expense spared to make it what it is. It is for the serious competitor that needs a turn key solution. Configuration is as follows: - Mazda 3-rotor with custom intake - Holinger 6 speed sequential gearbox - AP Racing 6 piston front/4 piston rear - Penske 3-way suspension front and back - Motec dash and ECU (fully enabled) - Custom 3-piece wheels, front 18x10, rear 18x12 The car has achieved som

2001 Mazda MX-5 Turbo: Corners Like It's on Rails Track Dedicated Located in Chelsea Heights, VIC** Some MX-5s are weekend toys. This one's a track dedicated fun machine. Built around a 162rwkw AVO turbo package and tuned for longevity rather than bragging rights, this NB8B has been developed into a proper track day tool and it's sold with everything you need to use it. I don't want to sell this but a change in circumstances sees me having to let it go. This is a 25-year-old dedicated trac

Mazda BT50, New fully race machined 20B triple rotor, t400 auto with all new internals by Peter Wileman, new Strange Ultra diff, 42 spline axles. New Master cylinders, rotors and pads. New bushed throughout front end. A couple of small things to finish off. Approx. 600 hp on a mild tune with 6lb boost. Plenty left to increase. New tyres. Also a 1986 twin cab Isuzu transporter that the fits into (wide track-2200mm). turbo motor (approx 220hp) and 6 spd o/drive box. Good for 130kph. 3 new axles

Mx5 RACE CAR 1991 NA THIS VERY WELL KNOW RACE CAR IS NOW FOR SALE. 2B LOG BOOKED EVEN THOUGH THE CAR HAS BEEN AROUND FOR A LONG TIME IT IS NOT AN OLD CAR. APART FROM BODY PANELS, VIRTUALLY EVERYTHING HAS BEEN REPLACED AND / OR UPGRADED AS PART OF AN EXTENSIVE MAINTENENCE SCHEDULE. OURRIGHT WINNER OF THE CUE ENDURO SERIES MANY CLASS WINS INCLUDING LAKESIDE, QUEENSLAND RACEWAY, MORGAN PARK AND PHILLIP ISLAND. ALSO RACED AT BATHURST. VIDEOS AVAILABLE FOR ALL CIRCITS. ENGINE LAST FULL REBUILT IN 2

Rainbow Warrior Piece of racing History. Car 1 of 2, 808 coupes built into rx3 by Terry Lewis for IPRA in 90’s. Only surviving race car of the 2. Fresh built 13B Bridgeport using brand new housings. 1 race meeting since rebuilt. Injection Perfection throttle body Haltech Elite 1500 S5 rx7 box with Albins close ratio gear set. Mazda LSD Bond Alloy roll cage 14” globe wheels Well set up race car that is a blast to drive. Body is not perfect but presents well with minor rust in engine bay

Original engine, still running strong Always warmed up before driving Only BP 98 260kW @ 16psi MODS Performance COBB Accessport COBB Front Mount Intercooler Tial External Wastegate CorkSport HPFP CST4 Turbo (EWG setup) CorkSport 3” Intake + 3.5” MAP Sensor CorkSport 3.5” Turbo-back Exhaust (with downpipe) CorkSport Boost Control Solenoid CorkSport Oil Catch Can Handling D2 Coilovers Whiteline Sway Bar Kit Whiteline Lower Control Arms Whiteline Engine Mount Hardrace Mount Pack Transmission BL

Built in March 79 the car now has a Larry Kogge built 13bbp running a 48ida new Spanish type Weber bought from Weber sales agent in Australia set up for a 13bbp. I bought the engine of a guy who always turned it over and kept it oiled up said to have done just over 1000k's. Larry raced touring cars and new his way around rotaries back in the day to my understanding. looking the intake runners id love to see in this engine some more. Series 1 box I believe and and standard rear end to be honest

1969 Mazda R100 Rotary Historic Sports Sedan. Australian Delivered R100 - VIN M10A-28786. I am too busy to campaign this car, hence it is for sale. Price reduced. Please no more time wasters. If you are genuine, let's chat. A Significant piece of Aust. Sports Sedan and Mazda racing history. It last raced at the HRCC 2025 Autumn Historics. --------------------------------------------------------------------------------- Racing history: (I copied this from a writeup done by the previous ow

Hi, Selling this beautiful RX7 which offers so much. The car is IPRA log booked and has only completed an extremely low number of events and a handful of practice sessions etc. Fully seam welded chassis to specification Adjustable springs all round (Eibach) Noltec adjustable spring upper mounts Custom fabricated Watts link rear Adjustable stabiliser bars Series 3 diff and axles but with a Mazda Factory Racing LSD diff centre Alloy foam filled fuel cell Front Brakes 296x28mm 5000 rotors with Will

Genuine Group N Mazda 323 GT-Ae with WRC History Offering a rare opportunity to own a piece of Australian rally history. This is a genuine Group N Mazda 323 GT-Ae, with documented WRC heritage and an impressive competition record: Two-time SA State Rally Champion National Motorkhana Champion (Outright) Multiple other state titles P6 ARC Rally Champion (~1999) Built to compete at the highest level, this car includes exclusive features: One-off Kevlar underbody protection by Rod Millen (as per

2004 Mazda RX-8 Formula RX8 race car. Motorsport Australia logbooked and built to national-spec Formula RX8 regulations. Features: • Fekete Fabrications weld-in roll cage • Shockworks suspension • Whiteline sway bars • Front strut brace • Performance brake rotors • Race steering wheel Engine remains largely standard as per category regulations. Included spares: • 2 spare gearboxes (need rebuilding) • 5 spare wheels (1 bent) • 4 new Hankook tyres • Spare front bumper Car has cosmetic damage t

mazda series 5 RX7 2F sports car / sports sedan log booked turbocharged 13B , Ambrose rebuilt engine , e85 or retune for 98,motec m84 ecu with data logging,full supercar style cage,floating front rotors and 6 spot calipers,adjustable suspension,fibreglass front and rear guards, 1109 kg race ready,18x10 and 18 x12 wheels pirelli slicks, car was owned by Richard bendall (motec) super car type wiring harness, great track car, or turn into a drift car, hill climb car,$45000. Great car to drive

Prod Sports 2F Mazda MX5 Race Car Cams approved and logbooked Fully built race engine Race solid clutch & lightened custom flywheel Adaptronic ECU Racing Beat Headers with custom exhaust – Lakeside noise test compliant OS Giken diff, 4:3 ratio MCA red coilovers with several spring rates Wilwood brakes 2 sets of wheels with A050’s Spares pack inc. gearbox/engine block/suspension parts/axles/brake parts

For Sale, 1999 Nb Mx5. Sprints, Track Days, Hill Climbs, Motokahana, Time Attack Build ready to race. This car was built for doing Sprints and Hill climbs so any form of Track days and so on this car is built ready to go. Due to where we live there is no "close" Track so like all good ideas its just feesable to own up here any more. Our loss is your gain. 1999 NB Mazda Mx5 Short version of the build Supercharged 1.8l 4cyl Haltech Elite 1500 Haltech IC7 Dash Tuned on E85 Bigger Throttle Bo

1979 fully restored rx7 series 1. Has hade full respray including jambs and engine bay. Restoration of interior. Original roof lining and door skins. Fully rebuilt factory 12a only done 500kms. Original wheels. Fantastic car.

Set up for drag racing 13b turbo engine - 640 rwhp (last dyno) Power glide gearbox (newly rebuilt) with 7500rpm stall with bump system Microtech LT10s ecu - 3 bar & 2 step Handmade 9" diff, Mark Williams alloy center 35 spline axels 4.8:1 4 link suspension and coil-overs not pictured: wheelie bars, parachute