21 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65
18
Roll CageLog Book
This is a highly sought-after two-litre Super Touring car from the celebrated era of British Touring Car Championship racing. A 1997-build car constructed and run by MSD (Motor Sport Developments) in that year’s BTCC and driven by British ace Patrick Watts in its distinctive Esso Ultron green and gold livery. Currently located in Adelaide, South Australia, chassis PR003 is one of only three 406 Super Tourers cars built for the 1997 BTCC season and later raced in Australia in the BOC Gases Aust
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.
7
Registered
Peugeot 207 GTI 1.6L Turbo engine ** Car is still road registered Forge intake Gaz Coilovers with adjustable dampening and adjustable rear springs Car has had the ecu sent away for a re-map in the UK Aftermarket fender flares done with nutserts so they are removable. Full custom 2.5” exhaust Velo 330mm alcantara steering wheel Near new AR-1s Car has Rallysafe already installed ready to go Brand new Sparco racing seats Near new velo 6 point harness setup Battery relocated Near new upgraded sl
15 1
Roll Cage
E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi
24
Roll CageLog Book
Well sorted,highly competitive Group NC HTC.nothing to spend.comprehensive spare parts package.Dyno tuned Korman spare race engine with manifold and carbies,six sets of wheels 13x6 and 13x7.5 speed gertrag gearbox and tailshaft to change car to five speed.spare close ratio four speed gearbox,spare panels,radiator,two lsd differentials 4:4 4:8..list parts available on request.car is available with spares minus spare race motor for $40,000.spare race motor available seperately for $18,000. .
18
Roll Cage
E36 coupe S50 B32 M3 motor, Zf 5 speed, locked diff ,Tilton clutch, two sets of 17 “ wheels, one brand new set of Yokohama AO50s, Ford front brakes, new AGI bolt in 6pt cage, power steering, swirl pot, thermo fan, Craig Davies thermo switch, just getting log booked. Times on Nankangs and Federals: Phillip Island -1.49.7 Sandown 1.21.9 Would get better times with the AO50s, photos help description.
18 1
Roll CageLog Book
Rare opportunity to own the only paddle shift M135 race car on the market at the moment. This freshly built production car has been proven and tested by the infamous John Bowe and is available now!! This vehicle has done a total of 3 test days at Sandown Raceway with impressive lap times and has a very high build quality done at David Levy Motorsports. This BMW M135 is fitted with superior quality features, including; - MCA GOLD SUSPENSION WITH REMOTE CANISTERS - DREXLER LSD DIFF - UPGRADED M2
12
Roll Cage
bmw e21 2 door coupe 3/4 chassis chrome moly 12 point role cage commodore twin piston brakes 9" nodule iron strange 4:11.1 gears 35spline axels autometer gauges mc Donald bros ladder bar rear end art carr gated shifter tailshaft to suit t400 transmission cooler under car fuel system suit twin carburetor e85 msd 6al2 Wildwood brake master braided lines wheel tubs suit 31.5 14" tires alloy front runners painted in flat black. had blown big block chev and t400 Moving and can't take it with me.
10
Roll CageLog Book
Bmw e30 race car Log booked improved production 3J Used for club sprints & hill climbs M20 2.5 litre with getrag 260 & LSD. Koni adjustable shocks all round with coil overs. Eibach front springs and customr ear springs. Fabraications built roll cage. Cobra seat Genuine BBS front bumper can come with car based on negotiation. Too much to list. Great fun car
6
Roll CageLog Book
Bathurst 1992 12 Hour Peter Brock’s team car. The car was part of the 3 car team sponsored by Peugeot factory car team. The photos were taken when it was in Bathurst Brock car museum.
9
2004 206 gti 180. Car has been stripped ready to be converted into a race car. All interior parts come with the car. Body work is straight and not long been painted satin black. Car has a clean title with sa plates. Also with the car comes a second 206 gti 180. Ex autocross car. Body work is rough but does have a cams approved speed roll cage. Rear is built to rally spec. Only needs a few more front bars to be a full rally cage. Head is off the engine. Suspected blown gasket. U.K built BE ge
7 1
Roll CageLog Book
BMW e46 m3 Sports sedan, as raced in the national sports sedan championship finishing 3rd in the last 3 championship seasons. -Aerodynamically enhanced carbon fiber body work -SB2.2 nascar engine, individual throttle bodies, drive by wire -Paddle shifted holinger rd6s -Motec m150gprp with upgraded logging, c187 data logger, motec pdm, all the allowable creature comforts such as traction control. -Double wish bone front end with billet uprights, live axle 3 link rear with camber adjustment, Ohl
14
Roll Cage
Own a piece of history and one the best looking drag cars, the ex- Alf Sorbello's Wild Bunch BMW 850i which ran in AA/AP. The body shell was hand made from new individual light weight body panels that Soebello purchased from BMW motorsport. The chassis was built as chrome molly twin rail tube frame with fully adjustable 4-link suspension, legal for Top Doorslammer and the IHRA Pro Mod class. This package comes with all components to build a top level drag racing car. Good for multiple ANDRA c
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando
7
Roll Cage
This car is a BMW M8 (original e31) tribute car. It is a RHD race car which was rebuilt from an 850CSi originally raced in the UK Substantially upgraded, repainted to ‘Hellrot’ and rebuild by RaceFx at Hampton Downs over two years, to replicate the unique e31 M8. Full cost of makeover at $300K+ ( not including the cost of the car). The body work around the rear wheel vents and front and rear mudguard flares is steel and the bonnet and the nose and front sub spoiler are in fibreglass. She was lig
10
Roll Cage
Set up for drag racing 13b turbo engine - 640 rwhp (last dyno) Power glide gearbox (newly rebuilt) with 7500rpm stall with bump system Microtech LT10s ecu - 3 bar & 2 step Handmade 9" diff, Mark Williams alloy center 35 spline axels 4.8:1 4 link suspension and coil-overs not pictured: wheelie bars, parachute
9
Roll CageLog Book
Mazda in excellent condition, recent service, garaged, Mazda BP GTR Motor with factory Ihi ball bearing Turbo, 221 KW @ rear wheels s/5 gearbox, new h/d tailshaft triple plate tilton, alloy flywheel 4.11 detroit locker.S/4 breaks all round ht 10 pads new front koni struts, harness, autometer gauges intercooler spray 48’s. CAMS log book. ID plates and could be registered if changed to roadworthy.
7
Up for regretable sale is my 325 convertible, I have owned and built this car over the last 14yrs. Don't need to sell, just no time now to use it. What started life as a stock 325 auto convertible is now a 6spd manual, turboed M50 b25 stoker (2.8) with Haltech platinum sport ecu running on E85 making 380rwkw at 20 pound and 440kw at 26 pound. Will come with a CAMS and ANDRA approved bolt in 6 point cage a Cobra monaco pro seat and a set of harnesses. Please see the photos for more detailed spec