SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

45 Road, Drift & Performance for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Aberfoyle Park SA, Australia
Share
Watch
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U

Narellan NSW, Australia
Share
Watch
9
Registered
Roll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo

Sydney NSW, Australia
Share
Watch
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Braeside VIC 3195, Australia
Share
Watch
10
Roll Cage
Rx8 with a honda k24a3 engine and tremec tr6060 gearbox. -honda k24a3 engine, bc double valve springs and retainers, 40 degree intake cam gear, k20 type r oil pump kit -custom engine mounts, gearbox cross member and diff mounts -custom steam pipe manifold, aeroflow gtx3071r turbo, 44mm wastgate, full 3 inch stainless exhaust -custom intake manifold, intercooler piping, catch can and other extensive fabrication -600x300 intercooler, alloy radiator, oil cooler -surge tank, walbro 460lph fuel pump

Gosnells WA, Australia
Share
Watch
20
Registered
Mercedes cla 250 sport 4 matic i track vehicle. No expenses spared. KW Clubsport suspension Hardrace suspension links Hardrace lower control arms Wanger intercooler Carbon fiber parts APR rear wing Trackspec bonnet vents HG motor sport Cold air intake Rennt carbon strut bar Armytrix decatted down pipe Front recaro seats Front 6 point harness Full forged motor( invoice supplied) Garrett performance turbo Transmission cooler aftermarket Motec C125 dash disp

Greensborough VIC, Australia
Share
Watch
8 1
For sale is a pristine 2017 Mercedes-Benz AMG C63s Coupe, boasting a modest 65,868kms on the odometer. This model features the elegant Dimond White exterior, complemented by the complete "Edition 1" Full interior. Recently fitted forged AMG wheels and brand new Nankang AR1 Semi Slicks (Cost me $5500) Regrettably, due to water exposure in NSW, the vehicle has been declared as a statutory write-off and, therefore, cannot be registered in Australia. Despite its pristine condition with no history o

Dandenong South VIC, Australia
Share
Watch
10
Roll Cage
Log Book
Turn key supersprint car for sale; ready to roll in 2024 Supersprint Series NSW Overview of cars history: Originally a daily drive from new, then sold in 2017 to a father/son project team who commenced a track car conversion spending on upgrades to include a Southbend competition clutch, Volk Ray wheels, Kuhmo semi slick tyres, KW shocks and SPL suspension components, 6 pot Brembos front and 4 pot rear, Borla cat back s/s exhaust, Kinetic inlet manifold and upgrades with Hotchkiss front an

Colebee NSW, Australia
Share
Watch
5
Registered
V8 Mazda Maxi Campervan S.A registered Holden 308 Possibly one of a kind Street registered with a Holden 308 turbo pattern engine. T400 three speed automatic transmission fully rebuilt with small stall Holley 600 fully rebuilt Custom exhaust Commodore rear end with welded diff Trans cooler and second radiator on bull bar Disk brakes all round The body is in fair condition and has been patched up and sprayed with a spray can Deck it out for a great Campervan Tow car for go carts Or remov

Adelaide SA, Australia
Share
Watch
10 1
Registered
Log Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1

Menai NSW, Australia
Share
Watch
7
Registered
Good track car for the road. My daily drive. Auto box. Nissan high performance, naturally aspirated engine, with handling to match. New engine, 4000cc engine with less than 10,000 kms on it. No nicks, no dents, no scratches -- immaculate! Inside and out; and under the hood. This car has never done a burnout or laid any rubber; never been on the track. Lots of power -- especially torque. Good set of Pirellis with some time left on them. Very noisy when provoked. Custom leather interior plus a

Hobart TAS, Australia
Share
Watch
9
Roll Cage
For sale s13 Silvia. I've owned the car for over 10 years and have decided its time to let it go. ENGINE 450hp at the hubs on E85 Forged ross piston and spool rods Brian Crower 264 cams Upgraded valve springs R35 coilpacks Kinugawa TD05-18G turbo Steampipe manifold Alloy radiator with AU thermo fans Oil Cooler with remote filter Bosch 1650CC injectors Turbosmart fuel reg Bosch 044 fuel pump with surge tank Haltech Elite 1000 with a custom harness LS alternator DRIVELINE BRAKES PAR engineer

North Toowoomba QLD, Australia
Share
Watch
28
Roll Cage
2002 Nissan Skyline R34 GTR MSPEC tuned by Full Stage Japan HKS STEGE III 2.8L STROKER KIT GT2530 x 2 EVC F-COM NEW GEAR BOX (GETRAG) CARBON TRIPLE PLATES CLUTCH IKEYA FORMULA LOWER ARM INJECTORS FUEL DELIVERY FUEL COLLECTOR TANK ARC RADIATOR FRONT INTER COOLER TRUST MUFFLER CARBON DOORS CARBON BONNET CARBON LID DRY CARBON REAR WING ENDRESS BRAKE CALIPER (MONO BLOCK) NISMO METER BOOST 1.2 550 ~ 580 PS BOOST 1.7 600 ~ 630 PS Only ran 300kms after the engine build Car is still in Japan $180,0

Adelaide SA, Australia
Share
Watch
8 1
Roll Cage
Log Book
Have my eye on another car so this one has to go. Been in development since 2017. Has raced in Targa West twice, Targa South west, Rallysprints, Racewars, Time attack and now Circuit racing.Full tech details in pics. Have all the parts to switch it back to Tarmac rally specs plus a comprehensive spares package including another set of wheels, diffs, gearboxs, drive shafts etc.. Has done a 61.04 at Carco.com raceway and has won multiple street car rounds at Collie and Wanneroo. Fastest rotary at

Walliston WA, Australia
Share
Watch
7 1
Sold
Was $50,000$35,000
Roll Cage
Turn Key Racing Built RB26 engine with mild cams, custom piping (Titanium Intake). Moderated tune to 586hp RW on e85. Well sorted and proven track car with major suspension component and brake upgrades. Has current Qld Club rego (with Mod Plate). Limited Sprint use only (Lakeside/Morgan Park/ Bathurst). Car has performance well beyond its aging owner but due to retirement (Read No Income) needs a new life. Have a full list of what has been done on this car for those with serious interest.

Worongary QLD, Australia
Share
Watch
5
Registered
Nissan Skyline R32 GT-R RB26 DETT, March 1994, 131300 km, Paint is in very good condition, New Tyres, New rear coil over shocks, New Battery, New injectors, New coil harness, New crank angle sensor, New Alternator, New fan belts, Full service, New clutch slave cylinder, Disk brake grind with new pads, New alternator,

Zilzie QLD, Australia
Share
Watch
9 1
***price drop*** 3 litred 1996 R33 GTS-t s2 I have owned the car for 15 years in which time it's sadly seen minimal use. Made approx 350rwkw last week on run in tune at only 13psi on pump fuel. Fresh engine, ground up forged 3 litre build. Less than 1,000km. Ready for e85 and boost. Z32 5 speed. All custom arms and mondified subframe. Original interior for the vehicle re installed with no peices missing except a leather gear boot. Car will have full detail and stickers removed for handove

Oakdowns TAS, Australia
Share
Watch
7
Registered
Roll Cage
Street Registered Full Bridgeport , doweled, 13B turbo RX7 manual FC Series 5 Turbo GT Edition Lots of brand new parts: * As new custom paint/wrapped * Modification plate for half roll cage and 2 x seat conversion * Big single turbo conversion, custom exhaust * Brand new full parts shop max steering and camber upgrade, front and rear, including coil overs * As new PWR 55mm radiator with heavy duty SPAL fan * As new PWR oil cooler with new SPAL fans * As new PWR street series intercoole

Brisbane City QLD, Australia
Share
Watch
18
Registered
Roll Cage
DESCRIPTION: Nissan R32 Skyline GT-R, Year: 1989 Powerful neck snapping performance ! 2-Door Coupe, All wheel drive Odometer: Indicating 127,512 Klms Engine: 2.8 Lt Turbo, Transmission: 5-Speed Manual, Grey Seats x 4. Currently tuned to be “run in” with new engine build by C - Red in Perth and built to performance specifications. Roll Cage Engineered in NSW by Phil Scoll – Automotive Consulting – as a Modified Production Vehicle. Work carried out by Peter Hopkins of Advan Performance.

Rossmoyne WA, Australia
Share
Watch
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando

Edinburgh SA, Australia
Share
Watch