55 items with Roll Cage for sale

Replica Penske Race car Group N logbook Freshly built & painted car having only completed 1 Race meet at QR finishing 2nd Brand new muncie gearbox with gearbox pump & cooler PWR radiator Racing Tri Y exhaust Ceramic Coated double adjustable Afco Shocks Howe Ball joints & tie rod ends 2 sets of wheels Aluminium fuel tank New Harness New seat selling less engine

1990 Series 5 rx7 - Aussie delivered Cams Log booked Original books and history Set up for tarmac sprint 13B turbo Microtech ECU Approx 400 HP Recent compression test available BC coil overs Strut braces Full cage with removable front section Fibre glass vented bonnet Terratrip ( never used it ) Comes with spares Ready to go racing Very fast, very reliable Could be returned to the street if you had the time and some interior pieces Great for someone that wants to get out there and

Now available for sale is this ground thumping 9 second street monster 1970 Chevrolet Camaro. Powered by a Sonny’s 555 cubic inch big block Chev with all the fruit starting with a Merlin block, Brodix aluminium heads, APD custom built 410 series blow thru carbie with dual floats front and back, Vortec supercharger running 10 pounds of boost, PWR custom made intercooler and a custom radiator with twin thermos fans to help keep things cool. A built Turbo 400 automatic transmission with a 3000rpm s

Mazda rx7 group b No mrte chassis ! Original grp b mechanic Strengeth chassis with new fia approved welded rolcage . Fiberglass bodykit and doors . Polycarbonat windows brons tinted . Alu gastank with certificate . Alu firewall . Alu windtunnel . New bigger radiator. Custom made wheelarches . Custom made rear 6 link . Original grp b 13b pp ported engine with 51 weber and airbox . Grp b dogbox 5 speed 1st gear left rear . Grp b rearaxle Big 4 pot brakes Electric servo steering short ratio . Bil

2007 Stroupe promod Chevy cobalt body Electromotion for chutes Floating axles 16v battery system Brand new Koni single adjustable shocks Originally setup for 400 small black With a manual Carbon brakes Message or call for more info

MG/SINGER SPECIAL – 1950 • Polished alloy with green guards and upholstery • Alloy body on Singer chassis • Retractable seat belts • Rollbar included • MGB 5 bearing crank • Bored out 060" • Good cam • Big valve cylinder head • 4 speed manual gear box • 1 3/4" SUs and extractors • 16" wire wheels with Blockley tyres • Dual master brake cylinders • New VW steering box • Tonneau cover included • Great to drive • Currently on non-transferable club rego • Will be sold as is. $43500 – or b

FOR SALE!!! 1968 RJ Chassis Camaro. - 2010 Chassis, build number #1332. - Good for ProMod, Nitrous, Import, etc. - Very low runs on the car. - Harry Glass carbon body and interior. - Strange carbon brakes front and rear. - Strange Ultra front spindle struts. - Afco Mencer double adjustable rear shocks. - Race Star Wheels all round. - 18" wide rears with 34.5" tire. - 5 x 4.75" stud pattern rear. - Hammer Concepts 9-11, 40 spline floater rear end. - 110" wheelbase. - MSD Programmable

Price massively reduced... 1979 Mazda 323 rwd 2-door rolling chassis. Last raced in Improved Production in 2022, it is set up with engine mounts for a Mazda BP engine. Would be an easy rotary swap if desired. Motorsport Australia log booked 3J (first raced in 2020). Extensive but lightweight cage built by Craig Wildridge, including bars through to the front strut towers. Double adjustable dampers by Suspension Concepts, with RaceProducts full cambered floating diff (28 spline RX4/S2000 cen

I have for sale or lease, With Out doubt 4 of the best built Mazda Rx8 production race cars available. All cars have had podiums, some have & had lap records with 60+ driver. All Free components have been made to the max. All new components are best of the best incl fluids i.e. Ryan Rotary coils, Radiators PWR or similar. All new cars have bugs & now sorted & now ready to go. All have my fresh Engines, Gearbox, diffs. All are capable of winning a championship and for those who lease a car I’ve

2008 Mazda Mx5 (NC1 roller) with NC2 engine and NC2 gearbox (6 speed with upgraded bushes and forks). Cluster shows 115K, but engine has only done around 60K Cannot be road registered. MA rollcage & logbook. I have raced this in Productions Sports QLD for the past 4 years. AGI Bolt in Cage. Miester R Shocks Upgraded front hubs. Cold air intake. Engine brace OsGiken Diff (only 4 months old. only did the recent Winton 300 and a few sprint rounds) Aftermarket headers and exhaust Ecute

- Ex Winston Cup Stock car raced in the US by NASCAR Legend Geoff Bodine in 1999 & 2000. - Built new June 99 then updated body installed for 2000 season. - Then raced in SCCA in early 2000's. - Imported to Australia in 2012 and was one of the founding cars of Stock Cars Australia series. - Currently a front running and race winning car in Stock Cars Australia National Series. - 18 deg SBC, 4 speed Jerico gearbox, Ford 9in road course rear end, Penske adjustable shocks. - Dry sump with oil heater

Z28 Camaro Sports Sedan built to TA1 Spec. R5 Dodge Engine 6 Speed Modena Sequential Full throttle upshift AP Calipers and Rotors Cabin Adjustable F/R Anti Roll Bars Motec ADL2 Dash with Shock data, Lateral G’s, GPS track map, Brake pressures, Steering angle and engine data. Set up equipment + spares included Spares Carburettors Brake Pads and Rotors Longacre Scales + Platforms Wheel Alignment Frames Engine Gaskets Radiators Body Panels Fully dressed spare engine can be included for extra.

Originally built by Gene Cook for Greg Crick. Not eligible for GROUP U., but may run as ‘invited’. Being sold as a roller. NO MOTOR OR GEARBOX. The RX4 diff has been replaced with a 9” Ford. I bought the car in 1989 and n 1995, removed the turbo 13b, and replaced it with a 350 Chev.. The car has not run much since due to medical issues. The original moulds and spare original panels go with the car, as well as the original log book. It could be built with a 13b, 13b turbo, or 350 Chev. I did have

Built by Reliance Automotive Services in Canberra to compete in bitumen road rallies using tge highest quality components. Tge build philosophy was to create a vehicle which could be serviced within the allowed time in the rallies. Items such as fuses are not concealed but are mounted visibly for quick access. Internal wiring is also installed to be visible. The suspension was built to have the maximum travel and excellent compliance to cope with all road surfaces from smooth to very rough, wet

MGA FOR SALE Stunning Iris Blue MGA in fine condition – sound racing history (Group Sa log booked) and road registered in South Australia (MG 1961), previously road registered in NSW with documents. 1960 Mark II, no rust, excellent paintwork. Well-developed engine, close ratio gearbox, lowered, sports exhaust. Recent rolling-road tune-up. Recent racing at Mallala, The Bend and Winton, Victoria (1:21secs) over the last 3 years. Exciting to drive with ample power (80hp and still going up on dy

This car was built for racing & has just undergone a full rebuild including; New 590hp engine, new Muncie race box. Detroit locker diff. New rear axles. New brakes & the list goes on. It has all the best gear & has won loads of races over the past 15 years. Full list of inclusions; 12 wheels, inc. wet-weather tyres. Spare gearbox. Spare locker. Axles. 4 Diff ratios. Discs & linings. Drums, Wheel cylinders.

1969 Mazda R100 Rotary Historic Sports Sedan. Based on Australian Delivered R100 - VIN M10A-28786 A Significant piece of Aust. Sports Sedan and Mazda racing history. Early history: Neville Cherry built in 1977 & raced in Tasmanian. Raced in Sports Sedans and was the quickest under 3Lt Sports Sedan holding lap records till 1981, when beaten by Allen Grice’s JPS BMW Sports Sedan. In 1982 car was sold to Fred Munday who raced in the Victorian Sports Sedan Championship, Larry Kogge continued