79 items for sale

Up for sale is this 2001 Nissan Skyline R34 GTT Coupe Manual in QT1 Pearl White, 144000 kms. This car has a lot of good modifications that would have it as an excellent circuit/track car - I have had it as a street car for the last couple of years and am finding more and more that I do not have the time to drive it nor the time to do the work to it that I would like. Option 1, take it as is at $58,000 and enjoy one hell of a street car - or option 2 have this R34 Skyline converted into a cage

MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.

N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

E30 M3 Replica (unfinished project) Straight, rust free donor shell Fibreglass M3 body kit (doors and bonnet Mike Shaw Fibreglass NZ. Wings, rear window frame, front bumper assembly, boot spoilers etc from Pesch Motorsport). Fire barriers installed between boot area and cabin. 95% complete, ready for paint or vinyl wrap Roll cage built by Brad Stacy Fabrications (builder of Aussie Invader cage), log booked with CAMS. 6 point national rally spec. Full build photos at: https://bradstacyfabric

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

BMW 135I built for Bathurst 6hr, only 2 meeting old , finished 12th out right in 2022 . Car was built by David leny motor spot & helped by Barry graham. Car comes with spares we take to Bathurst, no money to spend and is ready for Bathurst 2025 . Car has Supashocks all round , new seat and belts Call chris for more info and photos.

Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford

Looking to move on my 1993 Nissan Silvia S13 rolling shell. This car has had around $8,000 worth of suspension and chassis work done in the last year. The car has been driven one time since I reconditioned the full rear end, and everything in the front is brand new and hasn't seen the road yet. Every single bush, ball joint and arm is brand new front to back, the car has clean tags however the rear guards have been cut for over fenders. The engine bay was freshly painted a few years ago and loo

Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),

Currently registered in SA Purchased from Bundoora BMW as used in 2022 Aftermarket parts installed and car maintenance by Edge Motorsport Diff, Gearbox oil and filters changed 8000km ago. Engine Oil change every 5000km. Will come with all stock parts and wheels. After Market Parts: - Akrapovic cat back exhaust - BMW Motorsport GT4 Wing - GT4 Copy Brake Duct Intake with Carbon Rotor Backing Plate - APR Performance Front Air Dam - Border 2-Way SR Coilovers - SPL Rear Toe Arms - Goodridge Brake l

400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Well sorted,highly competitive Group NC HTC.nothing to spend.comprehensive spare parts package.Dyno tuned Korman spare race engine with manifold and carbies,six sets of wheels 13x6 and 13x7.5 speed gertrag gearbox and tailshaft to change car to five speed.spare close ratio four speed gearbox,spare panels,radiator,two lsd differentials 4:4 4:8..list parts available on request.car is available with spares minus spare race motor for $40,000.spare race motor available seperately for $18,000. .