18 items between $30,000 & $50,000 with Roll Cage for sale
Most Recent
Most Recent
Keyword
Category
Price
Listing Type
All Results
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear with surge tank runn
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
15
Roll Cage
No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.
10 1
Roll CageLog Book
The Ultimate Daihatsu Rally Car Engine: Toyota 4AGE 20v Blacktop Kent Intake Cam Yoshi exhaust cam VVT deleted Eagle Rods and Pistons 12:1 compression Ported head with standard valves MRP Titanium retainers and valve springs EFI Hardware airbox 4” inlet with 100mm billet velocity stacks MRP Coil on plug conversion Custom 4-2-1 manifold Remote oil filter mount and Setrab Cooler Ross Performance race damper Reduction alternator and water pump pulleys Gearbox: Sadev ST75-14 5 Speed sequential to
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
17
Roll Cage
Caged to CAMS rally spec 2ltr Zetec 200hp piper cams Jenvey fuel injection Emerald ECU PWR radiator 2x gearboxes. 1 x T9 5 speed( new ) and T3 4 speed Wilwood front brakes Compression struts Atlas diff 2 link plus panhard rod GAZ shocks Capri front struts AVO steering wheel All instrument fiber glass dash 4 Rebel wheel and 4 Hustler wheels RS200 decal kit and badges Just about everything needed
10 1
Roll Cage
Tas sports gtb circuit races car. Run in past 3 seasons of the tas circuit racing championship. Won lots of races. Very quick. Atomic gta550 engine detuned to 13psi making 408rwkw. Was on 15psi and 440rwkw. Adjustable everything. Brembo brakes. Replacement panels. 6 speed manual. 3 sets of wheels. 58 sec Baskerville, 59 sec symmons plains. Fun car to drive.
19
RegisteredRoll CageLog Book
NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca
10
Roll CageLog Book
Turn key supersprint car for sale; ready to roll in 2024 Supersprint Series NSW Overview of cars history: Originally a daily drive from new, then sold in 2017 to a father/son project team who commenced a track car conversion spending on upgrades to include a Southbend competition clutch, Volk Ray wheels, Kuhmo semi slick tyres, KW shocks and SPL suspension components, 6 pot Brembos front and 4 pot rear, Borla cat back s/s exhaust, Kinetic inlet manifold and upgrades with Hotchkiss front an
9 1
Roll CageLog Book
Current IHRA tech inspection and logbook. Selling to progress dragster. Tunnel ram Methanol injection on stroker SBC. Motown block, runs a cooling system as well. Racer pro heads and manifold. Trans brake PG transmission and full floater sheet metal 9". Has delay box and solenoid shifter. Turn key car runs super consistent 8.5 sec quarter mile. Enclosed trailer available separately. Can separate and sell as a roller, minus engine and transmission for $12K Or car with watertight enclosed tandem
6
Roll CageLog Book
For Sale Complete car less engine and gearbox. Or happy do discuss turn key package. Car will come with everything required to fit SR20 turbo. Motorsport Australia log booked available with the following, 12 forged buddy club wheels, Brembo brakes, Bond weld in cage, MCA triple adjustable shocks rebuilt with latest valving eibach springs, Motec ECU, full external fuel system, nismo LSD. Spares include coilover springs, bumper, brake pads, axles hubs.
9 1
Roll CageLog Book
Selling our 2014 Ford Fiesta ST Production Car. This is the 2022 Australian Production Cars Class D Championship Winner. This is a great package that and ready to hit the track. It's a proven winner. 3E Logbook with Motorsport Australia. Car recently ran in 2 days of thunder in Queensland Production cars and in its last race it came 1st in Class D and 10th Outright. Car has a dry break fuel system fitted and ready for endurance races or the Bathurst 6 hour. This car has had a complete refresh
14
Roll Cage
Z31 professional strip down to body shell , painted , roll cage installed & built by race car manafacturer for racing , Car has completed many Targa Tas & Targa events , circuit racing and Hill climb & various other forms of motor sport events , fully rebuilt low compression engine , forged internals , large pelenium manifold , custom ECU , oil , fuel & power steering coolers , Adjustable height & firmness control hydrolic dampners on all corners , massive tripple piston GT Racing calipers with
4
Roll CageLog Book
1927 Ford Roaster Drag Racing Car Engine: 383 Small Block Chev Gearbox: Powerglide Rear end: Strange housing and center with pro gears Chassis: Complete CM4130 chassis For photos go to www.cacklingpipes.zenfolio.com and search number 2360 or feel free to contact me with any questions.
6
Roll CageLog Book
Ready to race dragster.Engine 400ci Small block chev,runs methanol.Engine rebuilt in 2022 .Has run 1 meeting. Transmission 2speed Powerglide transbrake and timer.Verry reliable and consistant.Last 3 runs were identical times. Runs 8.3 At sea level. A built in trailer with 4 new tyres included.
5
Roll CageLog Book
Skyline R32 GTR Log booked sports sedan 3D with compliance plate. Eligible to Compete in: NSW/National sports sedans, for the last 5 years it was a class leading car. At Combined sedans bathurst 12hr chassis class it was on pole and had 2 race wins, raced Tin Tops bathurst, SMSP lap time 1.38, Bathurst 2.20, Super TT race wins, World Time Attack, Wakefield 1.03. Can compete in many classes. Eligible to enter the support race sports sedans at the bathurst 1000 in 2023 subject to category invit
29
Roll Cage
Whether you are looking to race or register, this Nissan 180SX represents a unique opportunity to get your hands on a truly special piece of automotive engineering. Built with an open chequebook by the Wizards at 'ARE' back in the mid 2000's, this car was designed to destroy just about anything at a dyno compettiton with its LC Engineering Toyota 3RZ under bonnet, turning out a truly astonishing 782hp atw on a mere 29PSI of boost. The engine was designed and built to run up to 50psi, so you ca