33 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
10
Roll Cage
Mitsubishi Evolution - EVO V Tarmac Rally / Track Car Roll Cage – Motorsport Australia Approved, fully welded 6 Point, by Fabraications FIA roll cage padding VELO Apex Seats: (1x) XL and (1x) Std fitted on welded rails, alloy side mounts VELO Black 5 Point harnesses Fire extinguishers (x2) Remote electrical cut out switch HC battery mounting case Rear fire wall – carpeted MCA Red Competition Suspension, fully adjustable Front RS strut tower brace Brembo Brake Callipers, ELIG Sports Brake Pads,
9
Roll Cage
Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.
6
Roll Cage
Ideal sprint/hillclimb car with freshly modified and dry sumped 3.8 litre Magna V6,fresh gearbox and LSD with 4.11 ratio. Electric power steering, BC racing HD struts and springs, 380 brakes & modified suspension. Half cage with intrusion bars, 6 pt harness and 17x9 lightweight wheels. Too many features to mention. Awesome car to drive, 1.17 flat at Mallala ,50.36 Backbone hill climb with 70 y.o driver. Plenty of improvement left......reluctant sale at $22000......cost more than that in parts.
16
Roll Cage
Heavily modified and built EVO 7 race car. Motec M800 with Motec C127 dash race logging kit incl can loom Nitto 2.3 stroker GT pumps 762 turbo with cold air intake Walbro 450E Fuel Pump on E85 Recently tuned by MPC. Made 350awkw on high boost and 300awkw on low boost on E85. New 5 speed Modena dog box (one track day old) new exedy twin plate clutch x4 Volk TE37’s 18x10.5 wheels with A050 295's. (two track days old) Velo Apex XL seats, Velo Light harness DBA competition rotors, 3 inch brake ai
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
20
Registered
Genuine Fully Built FQ360 Only a limited number of these released in the UK market Personal Import from the UK in 2014 55,000 miles (92kms) FQ360 original carbon front and rear lip as well as FQ360 interior in great condition 2lt 5 Speed Manual (Built by Neat Gearboxes) Tomei Cams ARP 625 Head Studs Nitto I Beam Rods Nitto Pistons Upgraded Timing Chain Turbo 1 Manifold Garret 3071R Invidia Exhaust FIC 1350cc Injectors K-Sport Coilovers Twin Plate Extreme Clutch Mishimoto Intercooler Work ZR10 18
20
Roll Cage
Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount
10
Roll CageLog Book
Mitsubishi Circuit/Tarmac Rally EVO 5 RS Mark King's original 2000 Australian Production Car Championship winning car. Immaculate condition. This car is prepared for circuit racing but also comes with German H&R height adjustable coil over and sway bars for tarmac rally. New Dashsport motor and turbo New 712GTP turbo on mandrel manifold Heavy duty racing clutch and pressure plate Moroso alloy racing sump Full Motec dash Hypertune exhaust manifold Titanium 2 1/2" exhaust PWR racing radiator ATL
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
12
Roll CageLog Book
Race and round winner in the Sports Sedan Vic State Race Series last time out, Sports Sedan or Improved Production race car , dry sumped 2.2 litre, fresh engine , Modena 5 speed just freshened , 6 pot and 4 pot calipers , supercar rotors , 3 way shocks , new turbo and exhaust , most of the running gear is one meeting old , Philip Island 1.38s Sandown 1.14s Fast car ready to race , multiple sets of wheels , spare drive shafts and other spares , 420 kw on 28 psi , you will not go faster for the
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in
3
Roll CageLog Book
2021 Radical SR3 XX: $139,000 + gst Owned from new, run and Prepared by Team BRM. This car has enjoyed race wins and podiums in it's short racing life. It currently has 9hrs on GDU, 9hrs on engine from New, The car will be delivered ready to run. - Centre Seat Option for optimal Weight distribution. - AIM smarty cam system - F1 Style Radical steering wheel with display, multifunction buttons and Paddles - TPMS - 1 spare set of wheels - High-downforce double adjustable rear bi-plane wing - High-d
16
RegisteredRoll Cage
Ready to race and built for Circuit Racing and Time Attack, this is one of SA's fastest Evos! Or if you're looking for a very tough streetcar, it's fully road registered, and in a couple hours you can swap over to the street parts and drive it every day. You're basically getting 2 cars in one depending on what you want to do with it. It's won SA Time Attack trophies in every event it's ever entered. Fresh built 2.35 Stroker with only 100kms since rebuild. Making 377kw @ 32psi on e85 track tun
9
Roll Cage
Rolling , Caged Evo 8 Shell MA certified fully welded Roll Cage , thru to front towers . Serial 73367 ( 2023 ) All Cross Members , Suspension , Arms , Steering Rack , Column & Wheel , Fuel Tank , etc Wiring Loom Rear Brembo Brakes Sump Guard Mount Fabricated Gearbox under member Carbon Fibre Door Cards , Foot Plates Ralliart rear Stone Shields Carbon Fibre Air Box Spare Rear Hubs Spare rear Suspension Arms
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar
10
Amazing beginner race car! Mitsubishi CE Lancer 1.5L This is very much a regretful sale but life has other plans. The car was originally set up to run nugget nationals in Melbourne but I bought it and shipped it over to SA to use it as a budget regularity car. It has never let me down and has preformed flawlessly. When I bought the car, it had a brand new engine installed, it had been completely stripped of all unnecessary weight ie aircon heater interior anything that will weigh it down. Th
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S
10
Roll Cage
Great little track/hillclimb car. Fitted with 1.8 turbo and AWD, sticks like glue. CAMS cage, surge tank and Bosch 044 pump setup in the boot. New windscreen to be fitted on sale for new owner, can assist with transport either in the state or interstate. Little use snce purchased 4 years ago. Sad to see it go, loss of job forces sale. Happy to answer any questions.
10
Roll CageLog Book
Fastest Radical SR3 RS in Australia! Proven at PI this weekend. Why spend $100'000's? Chassis number: SR3-00799 $58,500 ONO (ex GST). *** price reduced *** AIM smartycam system Pit radio system High-downforce double adjustable carbon rear bi-plane wing Paddle shift kit Plumbed fire extinguisher Air jack system and lance 1x set wet weather tyres 2x sets slicks Purpose-built car cover Low engine time 1500cc RPE Engine (maintained in Melbourne) eligible for RA Cup Paddle-Shift with Auto-Blippe
12
Roll CageLog Book
R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also avalable at extra,Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage cams apro