21 Enthusiast Vehicles for sale

I’ve owned this car since April, through my period of ownership I have turned the car into a reliable, fast, cheap to maintain and easy to use road/track car. In its current guise the car weighs 1050kg with a full tank. I’ve done 4000km on road and one track day at haunted hills where it covered 40 laps and drove home fault free. I have replaced/modified the following - Fitted a pair of WRX front seats. (Bolt in/out and are on sliding rails.) -Modified airbox with cold air feed. - 4x tyres T

Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original

2016 Mercedes-AMG C63 S Coupe Edition 1 | Stage 2 | 439.8kW at the Wheels Genuine Edition 1 designo Magno Selenite Grey matte paint Stage 2 performance package Dyno tested at 439.8kW at the rear wheels All original parts included 51,363 kilometres A rare opportunity to secure a genuine Mercedes-AMG C63 S Coupe Edition 1, finished in the iconic designo Magno Selenite Grey matte paintwork with factory yellow Edition 1 graphics and detailing. This is not just a standard C63 S Coupe. The Edition

2010 Mercedes-Benz SLS AMG Coupe | AMG Alubeam Silver | Full Mercedes-Benz History There are SLS AMGs for sale, and then there is this one. Australian delivered through Tynan Motors Mercedes-Benz Sydney, this example has travelled less than 2,000 km in the past 11 years and has been stored in a climate-controlled private collection since 2015. Two owners from new. Full Mercedes-Benz service history. All original paint. Most recently serviced by Mercedes-Benz North Shore in June 2026 at 17,634

Mazda Rx3 rear diff with full floating hubs. Three piece light weight race wheels 16x10 front and Rear. Custom front and Rear bumpers, spoiler and wheel arches. Front rotors with Nissan 4 pot calipers. Built for fitting a dolomite sprint engine. Comes with V8 subframe to fit Rover V8. Contact me for any additional photos.

Fully NSW engineered! Great car to drive on quality Mca suspension and full track ready engine work ceramic seals new housings etc. Car is ready to drive and take to the track. Mods listed below It is Australian delivered and the factory turbo model. The motor has only about 1800km on it. Only selling due too not using it enough. -1800km Bridgeport motor all done properly CNC re-nitrated plates. New housings. Ceramic apex seals and dowelled. 330kw at the wheels on only 14psi 98 fuel - Fu

Few modern performance sedans have earned the reputation of the W205 Mercedes-AMG C63 S. Combining traditional AMG muscle with contemporary engineering, it delivered one of the most engaging and charismatic driving experiences of its era. When introduced to the Australian market, the C63 S was universally praised by the local motoring press for its intoxicating blend of brutal V8 performance, everyday usability and exceptional chassis balance, with many regarding it as the benchmark in the hig

1963 Triumph Herald Coupe – ground up restoration, bare body rebuild to as new standard. Fully rebuilt 1200 cc Engine and drive train featuring the Factory option of twin SU carburetors ; Gaz shocks, new springs and front sway bar; Immaculate Paint and Panel; Minilite wheels ; Interior is original; Vehicle fitted with Lap seat belts (including relevant engineering plate); Vehicle ID : AGA 93130 DLC Engine # GA 98229HE Body # 110 TC All ID plates are on the car; Original owners Warranty and Servi

Original engine, still running strong Always warmed up before driving Only BP 98 260kW @ 16psi MODS Performance COBB Accessport COBB Front Mount Intercooler Tial External Wastegate CorkSport HPFP CST4 Turbo (EWG setup) CorkSport 3” Intake + 3.5” MAP Sensor CorkSport 3.5” Turbo-back Exhaust (with downpipe) CorkSport Boost Control Solenoid CorkSport Oil Catch Can Handling D2 Coilovers Whiteline Sway Bar Kit Whiteline Lower Control Arms Whiteline Engine Mount Hardrace Mount Pack Transmission BL

Targa-Spec Mazda MX-5 | 2.5L Engine Upgrade Road-registered and stage-ready. This MX-5 was built in 2022 specifically for Targa Tasmania, centered around a high-torque engine conversion that eliminates the limitations of the stock powerplant. The Build: 2.5L Performance - Engine: Upgraded Mazda 2.5L swap, professionally tuned for reliability and stage performance. - Suspension: Full Pedders Adjustable coilovers. - Wheels/Tyres: 17x8-inch wheels with Nankang CRS (50% wear). - Capability: Signifi

I'm listing up my 2005 Mazda RX8 - 6 speed manual for a regretful sale. This is a fantastic car for fun tarmac rally, circuit, or just drive it on the road. It is still fully road registered (not club etc) and if desired you could return it back to factory spec. I deliberately kept the build modest so future owners could return things to original, or go wild and continue to build. I would love to keep this car; but the reality is that it sits in the shed all but 7 days a year. I have another R

2021 Mercedes-Benz Sprinter – Enclosed Single Car Transporter Immaculate 2021 Mercedes-Benz Sprinter enclosed single car transporter, purpose-built and fully engineered with a GVM of 5,000 kg. This vehicle presents exceptionally well and is ready for work or personal use. 144,xxx km Turbo diesel Full logbooks & complete service history Second owner (owned since 40,xxx km) Travelled extensively around Australia No finance owing No accident history Professionally engineered and compliant Ideal for

Selling my FC RX7 to make way for the next thing... Mechanical: 13B-REW Conversion, semi bridgeport by 3S Garage Rotors tip clearanced, block studded w/dowel mods Compression tested on 22/12/2025 (R1 psi 115/117/117, R2 psi 120/120/118) PSR G40-900 on Artec Manifold with thermocouples added Turbosmart 50mm wastegate IGN1A coils, Radium rails/1650cc injectors Custom crank trigger ECU controlled electric water pump 3.5" exhaust into twin 3", 3x AES mufflers with ecu controlled exhaust valve All p

Rsre original condition cl 63 Serviced every 5000 kms Always garaged Accident free This car is in excellent condition and drives as new. Inspection will not disappoint

Hi, Selling this beautiful RX7 which offers so much. The car is IPRA log booked and has only completed an extremely low number of events and a handful of practice sessions etc. Fully seam welded chassis to specification Adjustable springs all round (Eibach) Noltec adjustable spring upper mounts Custom fabricated Watts link rear Adjustable stabiliser bars Series 3 diff and axles but with a Mazda Factory Racing LSD diff centre Alloy foam filled fuel cell Front Brakes 296x28mm 5000 rotors with Will

The Vital Statistics Kit Component MFG Harrison Labrador Qld. Kit Purchase Date 4th December 2009 Kit Number # WH 1109 - 102 Engine Number Ford JGCM2M70520 Vin Number 6TP01AAABOAABO14 Registration Approval Date 26th July 2011 Modification Plate S/No 51657 Ref 682050 ICV/ADR compliant plate engine bay. Vehicle Description. Roadster The Iconic Cobra Sports Car THe Dashing looks of the AC cars captivated Carrol Shelby and Ford to come together and produce the car we know as the Cobra. Based on t

1966/1985 KCC COBRA this car has VIC RWC Car has totally been rebuilt where needed ie new radiator and starter motor New tyres fitted 600 Holly carby Engine is a 350 Chevy with 3 speed auto For more details re work done Phone Chris 0411572559 if seriously interested