197 items for sale

Near brand new custom built buggy/atv trailer for sale. Not a cheap chinese trailer Made to suit Polaris RZR, but will fit other brands. 2290 wide 3650 long DO35 Hitch Ark jockey wheel Mud terrain tyres Built in ramps LED lights Lock and load tie downs Rego until April 2026 $9k

VS Commodore Ute Twin Turbo street registered Radial Drag Car . 1540 RWHP . SBC . All the best gear , Dart , Jessel , Crower , BME , Mark Williams , Weld V-Series and Holley Dominator EFI . Very reliable just freshened up with all brand new crank and rods . Regularly driven on the street and multiple 7 second passes with ease on Radials .

APG Big brake kit to suit FD3S RX-7. Used less than 5000km's Full bolt on with braided brake lines. 356mm x 32mm front disc Full floating rotor 330mm x 28mm rear disc Full floating rotor Inline hand brake kit for standard hand brake cable. Finished in Iron grey anodized. Race pad Reds (over 50% left) Optimal temperature range: 100~700°C Maximum temperature: ~750°C Coefficient of friction: 0.42~0.58 Went larger setup, no longer needed.

2016 Larry Jeffers Door Slammer / Pro mod $110000 is for the ROLLER only The logistics to run this car along with other stuff have got the better of me and I've lost interest, 400k invested so far Car is almost complete, still needs wiring, drive shaft, and some pipe work, was last run as door slammer (EX Marty Dack Car) and has not been modified since Body and doors are carbon, both front clips are glass Carbon brakes Newby billet diff to suit lockup trans JR shocks all round The below p

Monobloc racing calipers Alcon 6 piston Titanium pistons 210mm centers 42mm offset Up to 390mm brake discs

Surpluss to needs. Hitco carbon/ap racing 380mm discs 340mm discs 6 pot pads 4 pot pads Used in top tier Timeattack, Lmp and track days. Not to be confused with ceramic carbon used on exotics.

***OPEN TO OFFERS*** XG Ute. Original purple. In good condition. Spare engine, turbo, front mount intercooler. Various spares. Call for details please.

This 2012 Megane RS265 car was purpose built for Tarmac Rallying in Targa Tasmania by Renault Australia. Built from new the Renault Race team spec'd engine, suspension, brakes, internal, cage and comms. The 2.0 litre turbocharged, 6 speed engine has been tweaked by Renault engineers to give it the punch required to compete with fastest of supercars in Targa. Maintained by the Buckby Motorsport team this car is ready to race. Specs throughout inc Velo Races seats & belts, Sabelt steering wheel,

Electomotive Ignition System for 4 Cylinder engines, Came from my spares from my RT4. Includes XDI2 Volt pack, trigger wheels and brackets, wiring, 2 x weber carb tuning flow meters, all as in the photos. This a fully programmable ignition system. If the AD is up, then they available. Will post anywhere in Aust for $50.00,Else where by quote, or your Courier Company.

Complete fuel Injection system for Essex V6 which was removed frm a TVR. Air box and throttle body, inlet manifold, injection pump and injectors. Wiring harness probably incomplete.

Features :- Reese Goosebox hitch with air bag, suit 2-5/16" ball New Reese 8,000lb dual motor landing legs New 5,000lb electric winch New rubber torsion suspension axles Queen bed Fold out double bed Split system Air Con TV Shower -100lt water tank Gas hot water system Toilet Microwave Pantry 240/12 volt lighting Pull out cradle for 60lt Engel under seats Measurements:- Overall length - 11,350mm Body length - 10,800mm External width - 2,500mm Front section length inside - 4,350mm Rear section le

AP Racing CP3985-230EV x3 brand new, & x1 used, bought for my Nissan GT3 but have now found a set is stainless steel HD version so fitting these instead. Great price, great opportunity, can be collected or i can post.

Original SS camaro race prepared in 2020 by MCE Motorsport including approved roll cage and harnesses chassis improvements and Log booked as 3D Sports sedan/TCM. Eligible for other classes inc Street Cars & Commodore cup etc Brand new eng. installed with upgraded T56 Magnum transmission. Sept. 2021 eng replaced with brand new Chev performance strengthened alloy LS3 6 bolt block, Callies Forged crank and rods, SRP alloy pistons (11.5 comp.) Racetech Balancer, ARP main & rod studs, Crow 1.60 li

Tatum pro Buggy ,7 LT engine , 6 speed Albins sequential, all new engine full rebuild 400 kms old $55k spent on engine and motec system plenty of spares , full set of spare wheels with 3/4 rubber on all 8 wheels, all new power steering system front to back , hoses , rack , and pump . Most of the running gear on the buggy is Trophy truck spec ,hubs , brakes ect . Ring for more info

For Sale Excel race car Current Spec Supashocks suspension Poly bushed Brown Davies State level roll cage Winmax 6.5 brake pads Current Spec Dunlop tyres Sparco Grid 2 race seat Sealed fuel pump Short shifter Fuel Pressure regulator Alloy catch can Whiteline Rear Sway bar Braided Brake Lines 6 Point Harness GoPro mount Battery Box with provision to charge Go Pro Spare set of wheels Some spares Jerry cans Trolley jack Axle stands Spare brake pads (Brand New, 2 sets) Dorian lap timer included in

Abarth Replica; The Fiat 850 Spider was made in October 1972 and sold new in the USA, type 100 GBS1. It was subsequently imported to Australia. Chassis No. is 0125612. The car underwent extensive restoration including a body conversion to a 'covered headlight' and significant mechanical upgrades. The block is 100GBC. The head is a rare PBS 8 port head, pbs inlet manifold, twin 40 DCOE carbs and PBS sump. The car runs a front radiator - Alfa Sud. Interior has been re-upholstered with OMP seats.

2005 Subaru Spec C – PBMS ex-Cody Crocker 2005 ARC Championship-winning car A rare opportunity to own a genuine piece of Australian rally history. Built for Factory Subaru Rally Australia by Possum Bourne Motorsport in New Zealand for Cody Crocker’s 2005 ARC campaign, this car, known as CNC930, dominated almost every round and secured the 2005 Australian Rally Championship. It is one of the most successful Group N rally cars of its era. Cody Crocker described it as “possibly the best Group N

PORSCHE 996/993(964/944) 18 INCH BBS GT3 RIMS IN TOPCONDITION 7,5jx18 et 50 10jx18 et 65 These Nice Rims fitted under a Porsche 996/993 Narrow Body ,and with spacers rear from 10 mm under a Porsche 964 and Porsche Model 2

2800kg GVM with Electric brakes on four wheels - Al-Ko 50mm quick release electric coupling with hand brake 3500kg rated - Checker plate floor, sides and mudguards - Strong welded all around - Cross underneath 300mm gap from each other for extra strength - 1700x100x50mm long drawbar - 2x45mm square solid axle rated 1400kg each with 10 inch electric brake - 7 leaf rocker roller suspension - Tie down points all around - Color Aluminum - Primer zinc rust protection done - 7 pin flat plug, Mud flap