108 items for sale

NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca

Subaru GDB Sti 2005 – Circuit, Hillclimb, Rally Car Motorsport Australia Log Booked (State Level Circuit) AGI 6 Point Bolt in Cage (MA Registered) QLD Mod Plated EJ207 2.1L Stroker Engine built by Maximum Motorsport – Receipts available. Blouch Dominator 1.5XTR 10cm Turbo Subaru Genuine Nitrided Crank – 79mm ARP 625 Head Stud Kit Manley H-Beam Rods with ARP2000 Bolts Manley Platinum Series Pistons – 92.5mm Bore x 79mm Stroke ACL Race Series Main Bearings ACL Race Series Big End Bearings Link G

1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.

Limited modified Targa spec Studebaker Avanti. Built 2017/8 with no expense spared. Current MSA and AASA logbooks. Chassis extended and reinforced for Wildridge fabrications full cage, tower to spring shackles. Body fully stripped, reinforced, hogtroughs deleted. Cabin mounted fuel chiller box with oversize alloy fuel line to run E85 if required. Custom composite right hand drive dash with navigator consol. Cobra full winged seats on tracks. MCA gold suspension with remote cannisters to rear. Ra

•Built from a very rust free CK44 rolling shell. Only rear wells and heater bubble replaced. Steel Mexico front wing flares added. •Bare metal shell repainted. •Rebuilt and upgraded 1600cc GT OHV engine built by Trevor Hines. •Significant number of new or NOS parts used including:- radiator, starter motor, alternator, head lining, 9” rear brakes, Mk2 front suspension, M16 callipers, all new bearings and bushes, tca’s, carpet, laminated windscreen, clutch, battery, new tyres. •Genuine UK made ste

Professionally Australian built with American know-how. Motor is a fully worked big block Chrysler (253 cube) 3 speed gearbox, with USA quick change diff. Has triple Rotchester cars and an all alloy body. The tyres are racing 600x16 Dunlops, done 20hrs. The car itself had never been damaged and is well looked after. Last 8 years competed in regularity events in Perth. It is currently CAMS log booked. Owner is member of VSCC WA. Car garaged in Perth metro. This unique one of sprinter is modelled

It's time for my Humber Speedster project to be passed along to someone who can finish it. I had always wanted a pre-1920’s Speedster but as they don’t suit the highway driving of today I decided to make one from a car that could. The donor car was a ’32 Humber rolling Chassis. All the hard work has been done, and 99% of the materials and components purchased. I have chronicled the build in photographs and a blog, plus starting the engine for the first time on a video. When going through the par

RHD 2011 997.2 GT3 cup car built into tarmac rally car, Right hand drive converted with all genuine Porsche items, low hour modified 3.8 with 340KW at the wheels, modified cams and springs, RSR style headers, low hours on Holinger sequential, new extreme twin plate clutch built for tarmac rally use, ITB conversion, motec M600, new Velo Apex FIA seats, new Velo harnesses, Hydraulic handbrake, big modified steering lock, CSF radiator upgrades with cooling fans, fresh brakes, EXE-TC dampers built

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Torana Hatchback SL Hatchback project ready to get started! It has just returned from the sand blasters and is ready to start metal and body work. This car is a honest car and presents well without hiding any unknown gremlins. It is definitely the straightest Hatch I have ever seen and before body work has been completed. Has all three tags and matching chassis number. It has rust in the normal areas and I have a number of rust panels to go with the car. It is a genuine 77 LX sl Torana untou

Built with no expense spared for Targa Tasmania 2005 2005 Targa Tasmania class winner, 2005 2nd outright Pittsworth sprints, 2006 1st outright Tour of the Tweed, less than ten track days since then New directional Falkens, Rego March 2024, personalised plate 81JPS Race prepared 2.5L Alpina motor, 5 speed close ratio crate gearbox to highest allowed spec, disc brakes (slotted vented fronts), ~100kg below factory kerb weight and ~2x factory power, s/s twin exhaust, race wheels in period gold-sp

1923 Maxwell-Bentley Speedster, Maxwell preceds Chrysler. Engine 3lt 4 cylinder recently rebuilt, 3 speed, Maxwell chassis Wade Ro34 Supercharger, Roll bar and seat belt hard points mounts. Perfect car for taking part in the "Red Dust Devils" Lake Perkolilli 2025, or any historic race. Bentley bodied, Ash wood frame and lath covered in felt and vinyl. New wiring loom, starts and runs, needs cosmetics completed. Can be registered, Historic car needs numbers check only. Spare motor and gear box a

Reluctant sale of My 1977 Toyota mx36 Cressida, due to moving state and can't take it with me. I am only the third own of the car. The car been registered and road worthy for its whole life and always well maintained. The car is very original with only a 156,600ks on the clock. Has the original interior in good condition and new interior carpet. I have used the car for weekend drives with the family, the car always gets lots of attention and is a pleasure to drive. Work done: - Resprayed 3 mo

38 Chevy 350 power, steering air conditioning airbag suspension in excellent condition will not be disappointed

Lotus Cortina Mk1 1963; genuine A frame, aluminium panels & parts, original magnesium minilite wheels, ex AppJ/GroupN race car, known history, log book, former NSW rego, owned since 1992 & always garaged. NOT A REPLICA & VERY RARE. Ph 0413033695

With the 100 years of MG celebrations currently happening, it is a great time to own a MG. This MG B is set up for racing, however, can be registered under Classic Vehicle Registration. Has had plenty of performance work done to it and has recently had a considerable amount of money spent on refreshing it. I can share information with those who are serious. A great fun little car, I just have some other projects on the go now.

Immaculate 1961 Ford Anglia 105E Ford Bionic Blue No rust, perfect car. Personalised Plate 1600 Ford Cortina Crossflow Engine with Cam Extractors to 2" Exhaust System Weber Dual Throat Downdraft Carburettor Lotus Elan 2000E 4 speed Gearbox Ford Cortina Disc Front Brakes Brand new rear Drum Brakes All new interior Seats and Panels 3.77 Rear Diff ideal for Highways MacPherson Front Suspension New Gabriel Ultra Rear Suspension Dragway Magnesium Wheels 13" X 6" Kumho Radials 185/65/13 The car is

Holden Commodore 2017 Series 2 VF SSV Redline 6.2 litre V8, under 20,000klms Son of a gun grey, 20” rims, tow bar, engine cover, back spoiler, window shields, bonnet protector, light protectors all round, insect grill, black inserts on exterior ventilation points, window tinting and more. Only genuine inquiries please 0403 648 220 $76,500 but will consider genuine offers