1,815 items in Australia for sale

I'm listing up my 2005 Mazda RX8 - 6 speed manual for a regretful sale. This is a fantastic car for fun tarmac rally, circuit, or just drive it on the road. It is still fully road registered (not club etc) and if desired you could return it back to factory spec. I deliberately kept the build modest so future owners could return things to original, or go wild and continue to build. I would love to keep this car; but the reality is that it sits in the shed all but 7 days a year. I have another R

An original 1973 10A RX‐3 sedan that had been looked after, very nice car to drive with an honest body, this one is ready to enjoy - it’s a street‐friendly rotary package. Originally imported to New Zealand from Japan and then here to Australia 4 years ago by myself. 13b Bridgeport, rx4 block, Ida 48mm, rx7 gearbox 5 speed, Extractors, exhaust upgraded, adjustable front suspension with adjustable camber plates, lowering blocks in the back and an LSD differential. The interior is mainly orig

Tandem Race trailer built to suit Toyota 86 / Excel or similar small to medium size vehicle Bever tail 2000kg rated Removeable Tyre Rack and Front storage tray Quick and easy to load with alloy ramps and lots of tiedown points Perfectly balance so tow suburb 1800 between guard Gold Coast based

OPEN TO REASONABLE OFFERS MAY TRADE FOR SOMETHING OF INTEREST UP TO 50K VALUE + CASH Selling my VX Commodore race car. It was built for Replica Tourers but is also suitable for QTCC, Sports sedans, Vic V8’s and other local classes. Car specs: L98 6 Litre Race Engine built by Fataz competion Engines - Only the best parts were used. It made a genuine 500+ rwhp on roller/chasis dyno at 7200rpm on 98 fuel, not inflated figures like some other cars post. Engine built at 10.5:1 compression for reli

ford Mustang GT Mach 1 built by Ryan Mcloed was on pole for 2022 Bathurst 6hr it has 4 camera system Sparco seat on Ricaro adjustable slide 100 ltr premier fuel cell FAI approved Brembo billet brakes 378 Brembo rotor modified rear brake calipers with floating rotor Murray Cootes Gold shocks big range of eibach springs included new Mach 1 spec engine with boundary oil pump Mahle pistons Manley rods psi valve springs epoc multi angle valve job ATI balancer dynoed by roger Higgins new Suncoast 10

Toyota Used Racing Development Starlet - the TURD. What a machine! Originally built for cheap car enduro racing by the previous owners, I bought it to continue the tradition. Race proven. After I bought it, our team gave it some much needed elbow grease, made a few changes and ran it in the Light Car Club of Canberra 5 hour enduro at Pheasantwood Circuit, Marulan. We placed first in our category and third overall. Not bad for a crew of amateurs. This little champion didn't miss a beat. It's no

BMW F80 M3 production race car, ready to run in production racing, Bathurst 6 hours or new Production classes in Australia. Price just reduced from $135,000 to $125,000 Completed Bathurst 6 Hour 2025, ran a 2.24 still running air conditioning and a lot of extra weight still to be removed from car, led the race towards the end of the first hour (see photo car 154), came 2nd overall in Winton 300 in 2025 and won the class, car details are below, also available a complete spares package as noted

2022 Hellcat Redeye 797hp 8 speed 20,000km Serviced regularly Factory bonnet pins This is an absolute weapon of a vehicle. Call for more information

Great tow rig! 2020 Ram 1500 Diesel. 92xxx km on the clock, always serviced. Mainly highway kms. Perfect for towing long distances.

Awesome Targa, Race, Hillclimb, Motorkhana, or Drift Commodore Ute. Full TAS Road Registration. CAMS log booked and CAMS approved internal and external roll cages. 383ci stroked LS1 - CP Billet forged pistons - Scat H beam rods - Lunatai Voodoo Crankshaft Nitride - Racing sump baffle - Stage 3 Race Cam engine built for all day Targa events, so reliability was the main focus - 2x sets 18" HSV VY wheels with race tyres - 6 speed manual with race clutch - D2 8 piston front callipers and D2 6 piston

2017 Castune Locus M16 Clubman, one owner never been used on track, Mazda MX-5 engine. Not registered but has a VIN number. Can include two new SAAS seats. 12,775 kms Selling due to health.

OMS CF10 2011 built to order by Steve Owen in the UK MSA Logbooked Formula Libre Designed for both hillclimbs and Supersprints with bigger radiators and oil cooler 400Kg Carbon tubbed car One of the safest chassis in the British Hillclimb competition Upgraded billet rear end for supercharger Penske 2 way adjustable remote canister shocks with a 3 rd spring rear set up to control heave Rebuilt Wilwood brakes all round new pads and seals Paddle shift with flat shift and downshift blipper Lau

Up for sale I have a complete Mazda JC Cosmo 20B 3 Rotor engine. I have all the parts except the sump pan and oil pick up. Also I no longer have the factory twin turbo setup but I do have a custom fabricated turbo manifold with wastegate flange. All plates are in great condition, no step wear or damage, 2 out of the 3 housings are in good condition, 2 out of the 3 rotors are in good condition. The rear rotor and rotor housing have some damage from an apex seal failure. The crank is in great c

2013 k200 big cab nice looking truck cummins e5 engine 600hp brand new front springs and bushes new clutch and gearbox over the last 12 months new back brake liners truck is well maintained and ready to go no rwc or rego 130k plus gst

It's a Lotus, but not just any Lotus. The original 'Series 1' Lotus Elise is still considered one of the most well balanced light weight sports cars, offering pure driving nirvana. But improvements to this Elise have taken it from 'great' to 'brilliant'! In 2012 the original Rover engine was swapped for an almost new K20 from a Honda Integra Type R (Sunspeed conversion). As such the engine kms are actually only 35,000. Also included: • Full engineering • New Mugen gear box • LSD Kazz 2

This beautiful example of a 2013 Chevrolet 3500 Dually is reluctantly offered for sale. It took me a long time to find a clean example such as this one. Its had the CP4 fuel injection pump upgraded to the more reliable CP3 pump and a 165 gph 5g Air Dog lift pump to assist constant two micron filtered fuel to the injection pump. It has a genuine Chevrolet water pump recently fitted. This truck is an absolute dream to drive and requires nothing. It has 7 great tyres [including spare]. It has a

Genuine original BrUte. As raced. SRT built. Unmolested and unused. Garaged last 15 years. Started frequently. Will require fresh tyres and harness to be race ready again. A fast fun fabulous car to drive. May trade a good gravel rally car. Contact Rob Mortimer.

Selling Alfa Romeo 156 GTA 3.2L V6 Negotiable on price Was originally built for the Bathurst 24hr series, and competed in APCC 2003/04. Features include: Full roll cage Dry break fuel system 4 way adjustable MCA shocks Stainless Headers with catalytic converters removed New exhaust fitted Wheel stud kit fitting Aircon removed Brand new clutch Brakes Callipers refurbed Limited slip diff Has a comprehensive spares package including: 4 sets of rims 4 X Custom trailing arms Gear shift cables S

2022 Ford Mustang Originally raced by Owen Kelly until mid 2023 Recently competed in the 2025 TA2 Championship finishing 5th in the championship Professionally maintained between each event with a brand new engine fitted 4 race meetings ago and a very large spares package included in the sale. Ap clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded rear uni, Rebuilt G Force Gearbox, 22 springs (225lb - 550lb), 10 sets of drop gears, Spare Engine, Used

2 COMPLETE CARS 1) Peugeot 206 GTi – Track Car (Silver) 2) Peugeot 206 GTi - Spare Car - running & could road register, turn into another track car, or use for spares (Black) Selling our Peugeot 206 GTi race setup – includes two complete cars. (With clean tags) Originally prepared and compliant for Deputy 4 Hour endurance racing but our project has changed direction. Selling as a package. ⸻ Silver 206 GTi – Track Car Properly set up and ready to run: • AGI roll cage • Bucket seats +