1,902 items for sale

In it's original configuration this car won the UK Sports 2000 Series, driven by Ian Taylor. The rolling chassis was imported into Australia in 1982 and modified to run in the 1983 Australian Sports Car Championship. A new FT-200 and a "270 bhp" Mazda Rotary 12A PP were installed along with wider wheels and larger brakes. The unsorted car was driven by Richard Warland at Sandown, AIR and Amaroo, it was fast but unreliable. Next driven by John Smith at Oran Park, John won one heat and very com

We are thrilled to offer for sale a very special Corvette C6 Z06, professionally prepared for Dick Johnson to contest the 2011 Targa Tasmania, where the car delivered an outstanding second-in-class finish. With direct links to one of Australia’s most decorated motorsport figures and prepared to an uncompromising competition standard, this Z06 represents a rare opportunity to acquire a proven, high-level tarmac rally Corvette. Vehicle Details: • Chevrolet Corvette C6 Z06 • Build: 11/07 • VIN: IG

2011 DAF FAS 75 Pantech truck All tyres on this truck are near new, steer tyres were just replaced. Serviced regularly have the books to show. Truck went over the pits recently and everything passed fine. A service will be done again before sale. Truck has two seats in the front and a sleeper. Manual gearbox. Heavy rigid and has a GVM of 24 tonne. Air conditioned inside the pan, power points and lights throughout the whole back section of the truck. This truck can carry 3 cars as pictu

After the introduction of a new car at the Adelaide 500, The Racing Academy is looking to sell one of the 4 front running TransAm Mustangs in the stable. The car initially offered was 1st logbooked in 2025 prior to the commencement of the TransAm season and has competed in all 7 rounds by Cameron Laws who was awarded 2nd in the National TransAm Pro-Am Class at the Gala Awards at the completion of the season. The Cam also competed in 2 off TA2 rounds at Winton (where Cam qualified 6th) and SMP in

The Datsun starts first go. The engine is smooth. The gearbox is silky. The interior has had nothing done to it but is ok. The paintwork is requiring a lot of work but again ok. There's a small amount of rust.

Mitsubishi lancer evo IX Production touring car, MA log book. 5 speed manual Motec m800 ecu Motec c125 dash Tuned by Armour Motorsport services MCA coilovers Sparco race seat Sabelt harness Drink system 2 sets of wheels New pfc front rotors “spare” New Endless front pads “spare” New short motor from Mitsubishi Japan built before last 6 hour New Mitsubishi Japan gearbox installed before last 6 hour 90 litre dry brake fuel system Spare Intercooler Spare turbo “needs internals” but housing is fine

2023 BMW M3 CS – Carbon Ceramic Brakes – Premium Audio Australian delivered BMW M3 CS, widely regarded as one of BMW M’s greatest modern cars and a future collectible. This example presents in excellent condition and has been carefully enhanced while maintaining an OEM-plus finish and drivability. Factory Highlights • BMW M3 CS (limited production) • 3.0L twin-turbo inline-6 • 405kW / 650Nm • 0–100km/h ~3.2 seconds • M xDrive rear-bias performance system • M Carbon Ceramic Brakes (red calipers)

Here is an opportunity to own a factory built TRD Ae82 . This would be very competitive in the under 2l racing in group A /C . And would mix it up with a lot of the mid pack cars .. Toyota Corolla Grp A A piece of motorsport history Built by TRD Japan for team Toyota Australia. Toyota group A Corolla , Trd ae82 gtfx , was brought into the country early 1986 for the 1986 under 2l. championship. That John smith ran and won its first event . And won the championship. It ran 1988 Bathurst a

REPLICA ‘D’ Type Jaguar was one of only five Stardust built in the UK in 1991. This car was road registered in England and imported by previous owner to be displayed at the 1992 Sydney Motor Show. Then registered with CAMS as a sports car-catergory 2 and participated in several sprints, hill climbs and car displays in both NSW and QLD. Engine – Pinto Cosworth - RS2000 SOHC – 4 cylinder 130bhp – twin Weber 45s – re-ported head – lightweight flywheel Chassis - triangulated space frame Body

JPS BMW 635 csi E24 Built principally as a Club racer this road registered 635csi has been developed by renowned BMW race engineer Pip Barker. Features are as follows:- Six cylinder 3.5 litre engine 5sp Manual Bore 92.6mm Stroke 86mm Pistons Mahle Motorsport forged hemispherical dome Conrods factory, lightened and shot peened with new rod bolts Comp ratio 11.5/1 Camshaft Cat Cam 326* duration, 11.15mm valve lift, valve clearance 0.30mm intake and exhaust - cold. Valve springs Cat Cams in

Suki Swift sports 1.6 L cams approved Real cage and log booked as production car coil suspension

Porsche 991.2 Cup car 2019 (Ex Porsche School car) Raced in the Porsche sprint challenge over the past 3 years to race wins and pole position. Comes with 3 x sets of wheels total, air lance , car cover and Vbox camera. car total milage 16180 kilometers. Engine 90 hours 1 round on driveshafts and clutch Car has been maintained to the highest standard over the past 3 years and has never been in any major accidents. (original front tub and all panels original except front and rear bar.) A

2021 Mercedes-Benz Sprinter – Enclosed Single Car Transporter Immaculate 2021 Mercedes-Benz Sprinter enclosed single car transporter, purpose-built and fully engineered with a GVM of 5,000 kg. This vehicle presents exceptionally well and is ready for work or personal use. 144,xxx km Turbo diesel Full logbooks & complete service history Second owner (owned since 40,xxx km) Travelled extensively around Australia No finance owing No accident history Professionally engineered and compliant Ideal for

This car was built as a Group N racecar and ran at two meetings, QR and Lakeside. At the most it has been driven 50 Kilometres. The body is as near to perfect as you can find anywhere. Replica SSS. Spares available.

Ferrari 488 Challenge EVO – Championship-Winning Car Price: $200,000 Firm Mileage: ~13,000 km Location: Sydney, Australia Offered for sale is a Ferrari 488 Challenge EVO with a proven, victorious pedigree, having won the 488 Class in the 2025 Ferrari Challenge Australasia. This is a front-running car that has delivered results at the highest level of the category. Equally suited as a serious track-day weapon or an ideal entry for Production Sports / race categories, this car represents strong

Race trailer with toilet Split system aircond Smart tv with roof ariel Fridge Full carpet Lined inside roof and walls Stainless toolbox or kitchenette built in35 2 x winch 1 x car 1 x door Solar system 12v led light system Dimensions in photos Skyline system with satelite mount 3500watt silent invertor

MES2 completed in the Australian V8 Supercar Series between the years of 1998 and 2001 in 20 races including Bathurst, Sandown, Indy and the Adelaide 500 It was campaigned by Tomas Mezera and co-drivers: Terry Finnigan, Alain Menu (two time British Touring Car Champion) and Tony Ricciardello In 1999 the car was leased by Gibson Motorsport and raced by Steve Richards at the Albert Park Grand Prix in the #7 VT Wynn’s livery The car is presented today in the black & white Densitron Livery, has a

I have a bunch of Cup Car Parts for sale as follows. • 2 sets of 997.2 Forged factory 1-piece rims $4000 per set • 1 set 0f 997.2 BBS 3-piece rims $3500 • 2 sets 997.1 rims with wider rear inner section to run 997.2 tyre $2500 per set. • 1 x 997.1 LH factory Cup Door $3000• • 997 Cup Brypar – New front and rear disc rotors (no Hats) $2000 • 997.1 Rear BBS rim $700 • 997.1 BBS front and rear outer rims $300 each • 997 Cup Hollinger Gearbox $25,000 • 997 3.9L Cup Car Engine – hear in car running w

Selling my FC RX7 to make way for the next thing... Mechanical: 13B-REW Conversion, semi bridgeport by 3S Garage Rotors tip clearanced, block studded w/dowel mods Compression tested on 22/12/2025 (R1 psi 115/117/117, R2 psi 120/120/118) PSR G40-900 on Artec Manifold with thermocouples added Turbosmart 50mm wastegate IGN1A coils, Radium rails/1650cc injectors Custom crank trigger ECU controlled electric water pump 3.5" exhaust into twin 3", 3x AES mufflers with ecu controlled exhaust valve All p

This car has raced in FF1600 in the past few years but is available for sale in a base form suitable for speed event conversion. Included: Chassis, body, interior panelling Steering, inc s/wheel Pedal assembly and master cyl's Suspension exc. dampers Drive shafts inc. CVs Radiators and ducting New fuel tank An assortment of Vector spare parts, jigs and moulds including arms, pushrods and nose cones. Original format CAMS logbook covering the car records from Australian delivery through