SSR Enabled
Australia's #1 Enthusiast & Motorsport Marketplace
Australia's #1 Enthusiast & Motorsport Marketplace

1,244 car for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum

Featured ads

All Results

4
Roll Cage
Log Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin

Waiau Pa, New Zealand
Share
Watch
10
Please read this advert completely before ringing so you know what this is. This is a 2008 BMW M3 in fantastic condition, it is an English import by the previous owner, who imported the car but without an import approval. As such he was given 3 options by the department of infrastructure, re-export the car, have it crushed, or import it as a race car. As the owner did not have a race car licence, he sold it to me and I imported it as a race car – the vehicle has NEVER been on a race track (YET).

Vermont VIC, Australia
Share
Watch
9
Roll Cage
**PRICE DROP** 2004 Holden VY Ute Drag Car 468 BB CHEV (selling turn key) Monaro front clip, Steel shell & Alfa glass panels. 9 inch rear with 455 nodular 35 spline spool & Mark Williams axles. Macdonald Bros 4 link rear end with sway bar & strange shockers. Light weight K frame with new struts & Wilwood front brakes and master. Advanced headers customs pipes, BG fuel pump, alloy radiator, MSD power grid ignition. 15x14 Weld racing rears & 15x3 front runners. Weighs 2590 lbs without driver.

Hope Valley SA, Australia
Share
Watch
7
Brand new OSG center, includes stub axles and their bolts, new bearings and seals, what's not new is in excellent condition. Built by a pro for my project car that was never finished.

Warwick QLD, Australia
Share
Watch
5
Please contact for details about the car

Newcastle NSW, Australia
Share
Watch
8 1
Registered
Roll Cage
Log Book
Limited modified Targa spec Studebaker Avanti. Built 2017/8 with no expense spared. Current MSA and AASA logbooks. Chassis extended and reinforced for Wildridge fabrications full cage, tower to spring shackles. Body fully stripped, reinforced, hogtroughs deleted. Cabin mounted fuel chiller box with oversize alloy fuel line to run E85 if required. Custom composite right hand drive dash with navigator consol. Cobra full winged seats on tracks. MCA gold suspension with remote cannisters to rear. Ra

Somersby NSW, Australia
Share
Watch
13 1
Roll Cage
Log Book
Now in Australia the Funcup cars are a full-size replica of the Beetle. They are a center seated, tubular chassis, fiberglass bodied, sequential flat-shift 5 speed racecar built to be the most cost-effective fun you can have on the racetrack. Funcup Australia are importing these cars and supply all the backup, preparation, parts, transport, technical assistance and coaching you require to get the most out of yourself and these awesome cars. This car has just been fully rebuilt by Funcup Austr

Braeside VIC, Australia
Share
Watch
7
Roll Cage
For Sale, 1999 Nb Mx5. Sprints, Track Days, Hill Climbs, Motokahana, Time Attack Build ready to race. This car was built for doing Sprints and Hill climbs so any form of Track days and so on this car is built ready to go. Due to where we live there is no "close" Track so like all good ideas its just feesable to own up here any more. Our loss is your gain. 1999 NB Mazda Mx5 Short version of the build Supercharged 1.8l 4cyl Haltech Elite 1500 Haltech IC7 Dash Tuned on E85 Bigger Throttle Bo

Rockhampton QLD, Australia
Share
Watch
23
Roll Cage
Log Book
This Minetti has been a total rebuild of electrical with all Haltech equipment. This includes IC7 Display Dash, 2500 Elite ECU, 02 Wide Band Sensor, HPI4 Power Ignitor. The engine is a Gen 2 -1340cc Suzuki Hayabusa with 8 injectors and has the low profile sump with a 360 degree swivel pick up. The body is a new 1 piece lightweight version. Other equipment includes, new 6 point harness, MCA fully adjustable shockies front and rear, new Avon tyres only 2 meetings old, Dyna jet quick shift for flat

Toowoomba QLD, Australia
Share
Watch
8
Log Book
Professionally Australian built with American know-how. Motor is a fully worked big block Chrysler (253 cube) 3 speed gearbox, with USA quick change diff. Has triple Rotchester cars and an all alloy body. The tyres are racing 600x16 Dunlops, done 20hrs. The car itself had never been damaged and is well looked after. Last 8 years competed in regularity events in Perth. It is currently CAMS log booked. Owner is member of VSCC WA. Car garaged in Perth metro. This unique one of sprinter is modelled

Perth WA, Australia
Share
Watch
3
Light use over 2 years - Manufactured in 2022. Am first owner. Flawless wheels - no cosmetic or functional damage anywhere Has only been installed by-hand Uses a centrelock mechanism Near-new porsche centrelocks are available for additional cost. sizes are 19" x 9" for front and 19" x 12" for rear sets. Colour is gloss race gold Each wheel retails for $2700 + freight. Are open to offers on price - please contact for reasonable offers https://forgeline.com/wheel/ss1r One-Piece Forged Monobloc

Winston Hills NSW, Australia
Share
Watch
14
Up for sale is our Corolla KE70, aka Nana-Spec, project car 4A-GE motor (originally out of MR2) ECU and wiring is completed Motor runs (needs the return fuel line back to the tank to be plumbed up) Hydraulic clutch installed, needs to be bled Surge tank and pump installed New exhaust system Original paintwork and interior Minor rust in lower rear outer quarter panel and front edge of bonnet, and small amount of panel work required Clean chassis and underneath Selling due to not having enough

Rockhampton QLD, Australia
Share
Watch
11 1
It's time for my Humber Speedster project to be passed along to someone who can finish it. I had always wanted a pre-1920’s Speedster but as they don’t suit the highway driving of today I decided to make one from a car that could. The donor car was a ’32 Humber rolling Chassis. All the hard work has been done, and 99% of the materials and components purchased. I have chronicled the build in photographs and a blog, plus starting the engine for the first time on a video. When going through the par

Hawthorne QLD, Australia
Share
Watch
21
As New Fully enclosed vehicle transporter customised in August 2023. Used for touring project. ATM: 2500 TARE: 1250 Lockable front nose storage Electric Winch Electric Brakes Ramps store under the side of trailer Car tie-down eyelets in floor Marker lights around whole of trailer Tyre Size 235/R17 Dimensions Overall inc Draw bar 7800 Overall width 1920 Overall Height 2985 Internal Height 2520 Internal Length 4660 Rear door opening 1841 wide x 2520 high WA rego to 18/01/2024 Internal dimensions

Welshpool WA, Australia
Share
Watch
10
Log Book
Time has come to sell the pride and joy. This is my 2002 Subaru WRX STi WRC S7/8 build. Had it stock since the start of 2017. This is its final form. The current kms on the car is 299252. Puts out 315 HP. Extremely lightweight. Very responsive. Just a bigger Gokart Car is currently unregistered. Plates will come included in the sale. Body: - Genuine WRC S7 kit from Rallytech in the UK - S7 Front bar - S7 Fenders / wings - S7 Side skirts - S7 rear bar (Exhaust hole has been plugged) - S7 Carb

Hinchinbrook NSW, Australia
Share
Watch
20
Roll Cage
Log Book
Holden lj torana historic touring car , 295 hp 202 roller cam engine full girdle bottom end blue motor crank matched ported intake and exhaust triple 45 dcoe webers electronic ignition , centre throw hydraulic clutch , L34 ratio gearbox spare m21 gearbox , diff full spool 3.08 3.36 3.55 strengthened main caps 28 spline axles adjustable pedal box BMW vented front discs Volvo 4 spots , large adjustable koni shocks king springs, 2 sets 13x7 hot wires plus 1 set 13x6 hot wire with wets

Heath Hill VIC, Australia
Share
Watch
31
2003 CITROEN XSARA II VTS 2 DOOR COUPE (SAME AS PEUGEOT 306GTi ) Due to not enough use, we have decided to part with our track prepared Citroen VTS. The Xsara VTS was the production car built at the time of Citroen W.R.C. successes with drivers such as Sebastian Loeb. As a Citroen dealer at the time we used a really good Xsara VTS and carefully modified the car with equipment that made it the most reliable, fun track car you can have in this budget sector. Huge amounts of money and time when i

Rosebery NSW, Australia
Share
Watch
5
Registered
V8 Mazda Maxi Campervan S.A registered Holden 308 Possibly one of a kind Street registered with a Holden 308 turbo pattern engine. T400 three speed automatic transmission fully rebuilt with small stall Holley 600 fully rebuilt Custom exhaust Commodore rear end with welded diff Trans cooler and second radiator on bull bar Disk brakes all round The body is in fair condition and has been patched up and sprayed with a spray can Deck it out for a great Campervan Tow car for go carts Or remov

Adelaide SA, Australia
Share
Watch
10
Log Book
2015 Tatuus FT50 ex-TRS car, previously run by M2 Competition in TRS up until 2019, running privately in Formula Open New Zealand since then. Original Toyota spec throughout, well maintained, NZMS log book. Original Motec Engine Management System. Original quick lifts front and rear. 2x spare sets of rims (3 sets total) At least $25k spares package (including new front wing, wiring loom, various springs,etc). Hours spent getting the setup perfect for Hankook tyres, just mould a set and go ra

Hamilton East, Hamilton, New Zealand
Share
Watch
8
Registered
Selling my beloved e46 m3 due to lack of use. Factory manual, with numerous upgrades to turn it into a capable turn key track car, as well as fast road cruiser. Maintenance is fully sorted with the “big 3” done, along with head rebuild and fixing/ replacing anything as it was needed. Paint is good interior is good save for some blemishes. Will be sold on the white 219m wheels and ad09 tyres. Can assist new owner with reverting to track focussed setup Happy to answer any questions / provide more

Mulgrave VIC, Australia
Share
Watch