21 Car, Bike or Kart between $30,000 & $50,000 for sale

Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.

This 500HP Midnight Purple 3 R34 is not a car you can just go out and buy in this condition. I recently won this car through a raffle with Vincere Australia, who bought the car off of a woman who did the majority of the modifications. The paintwork, the body kit, the extensive modifications to reach 500HP reliably AND legally, really proves that this car was loved and cared for before I owned it. I have a tracked down a full history of the car in Australia; when it was imported, who owned it,

Registered on road, genuine sleeper Runs on E85 only, 402 iron block with Borg Warner turbo. Turbo 400 gearbox, transbrake with two step. This car is a sleeper, good condition. Comes with tyres and rims for drag racing. 14 psi 868hp at the hubs, 10.8 Single owner

Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Car is one of 128 Porsche 944 S2's delivered in 1989 (build date is December 1989 & delivered to Hamiltons in early 1990). * Approximately 180,000km (I have full history & owners are well known within Porsche Club Victoria) * Fully rebuilt motor (slight power increase) & new clutch pre Covid with limited use since (cost $18,000) * M030 components including Brembo ABS brakes with slotted discs & new pads * Eibach springs, adjustable koni shocks (with spare springs & shocks) * I have a range of w

NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca

1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

Up for sale is my Vy commodore track car The engine is a 6.2 LS with a standard crank H beam rods and forged pistons It’s got a mild cam with upgraded pushrods, LS7 lifters, double valve springs with locks and retainers to suit, crow cams trunion bush upgrade into factory rockers mellings oil pump with double row timing chain custom modified VY sump to hold more oil with improved racing products baffle inside, it’s got a 102mm throttle body and over the radiator intake, custom catch can with 2 -

Turn Key Racing Built RB26 engine with mild cams, custom piping (Titanium Intake). Moderated tune to 586hp RW on e85. Well sorted and proven track car with major suspension component and brake upgrades. Has current Qld Club rego (with Mod Plate). Limited Sprint use only (Lakeside/Morgan Park/ Bathurst). Car has performance well beyond its aging owner but due to retirement (Read No Income) needs a new life. Have a full list of what has been done on this car for those with serious interest.

2021 and 2022 944 Challenge Series Championship winning car. Dipped shell, Full Welded cage, Van Zelm/Rod Smith front end control arms, Aluminium rear arms, Custom Fuel tank, swirl pot / second pump strong engine, new clutch installed, steel headers, fabricated exhaust, polished manifold/ booster, internal braided fuel lines, cool air intake, Aluminum Radiator, external oil coolers (twin). Series Motec ECU and separate Motec Dash Velo Wrap around seat, seat belts new 2022, wide rear-view mirr

Z31 professional strip down to body shell , painted , roll cage installed & built by race car manafacturer for racing , Car has completed many Targa Tas & Targa events , circuit racing and Hill climb & various other forms of motor sport events , fully rebuilt low compression engine , forged internals , large pelenium manifold , custom ECU , oil , fuel & power steering coolers , Adjustable height & firmness control hydrolic dampners on all corners , massive tripple piston GT Racing calipers with

Porsche 928s 4.7 liter V8 track car. Built by Weltmeiser Porsche specialists. Car was in storage for 15 plus years and has recently been recommissioned and has only completed 3 track days. I have a receipt for over $10000 for this work. Some of the work carried out is as follows; - Removal of complete fuel system, tank etc. blew out all fuel lines replaced and flow testing of injectors and new genuine bosch fuel pump - New cams belts and water pump - Removal of brakes discs and machined disc

Whether you are looking to race or register, this Nissan 180SX represents a unique opportunity to get your hands on a truly special piece of automotive engineering. Built with an open chequebook by the Wizards at 'ARE' back in the mid 2000's, this car was designed to destroy just about anything at a dyno compettiton with its LC Engineering Toyota 3RZ under bonnet, turning out a truly astonishing 782hp atw on a mere 29PSI of boost. The engine was designed and built to run up to 50psi, so you ca

Major upgrades include, uprev tune 5 stage by rev zone, 230kw @ 6764rpm (315kw at fly wheel) coil overs with eibach linear springs - 9.5kg rear / 11kg front. Cusco RS 1.5 weigh LSD Z1. Motor sport dif cooling cover AP racing 6 pot front brake kit with endless ME20 pads. Akebono 2 piece rear rotors with endless ME20 pads. Stillen front splitter Stillen front canards. Z speed aluminium under shroud. Rev Zone custom front alloy under tray. Evo R rear wing, Stillen gen 3 long range intakes, Stillen