67 items for sale

Turn key Competitive RX8 Cup car or Formula RX8 car. that has been well maintained. The car is race ready and has recently been prepared. Suitable for anyone wanting to step straight into the a one make category with a competitive car. Setup and had extensive mechanical work by Stiaan Kriel last years RX8 Cup winner, To bring the car up to spec. Engine - 3 Race meetings old (Ric Shaw Performance) - Microtech Dash Display - Dyno'd by Roland Wankel Garage - Twin engine oil coolers - Racing pull

I am selling a 2017 MX5 ND RF to be used as a race car. This car is a stat write off. 2litre, 6 speed manual perfect for the MX5 Cup Does require a front guard on passenger side. 45,000 klm

Mazda BT50, New fully race machined 20B triple rotor, t400 auto with all new internals by Peter Wileman, new Strange Ultra diff, 42 spline axles. New Master cylinders, rotors and pads. New bushed throughout front end. A couple of small things to finish off. Approx. 600 hp on a mild tune with 6lb boost. Plenty left to increase. New tyres. Also a 1986 twin cab Isuzu transporter that the fits into (wide track-2200mm). turbo motor (approx 220hp) and 6 spd o/drive box. Good for 130kph. 3 new axles

Mx5 RACE CAR 1991 NA THIS VERY WELL KNOW RACE CAR IS NOW FOR SALE. 2B LOG BOOKED EVEN THOUGH THE CAR HAS BEEN AROUND FOR A LONG TIME IT IS NOT AN OLD CAR. APART FROM BODY PANELS, VIRTUALLY EVERYTHING HAS BEEN REPLACED AND / OR UPGRADED AS PART OF AN EXTENSIVE MAINTENENCE SCHEDULE. OURRIGHT WINNER OF THE CUE ENDURO SERIES MANY CLASS WINS INCLUDING LAKESIDE, QUEENSLAND RACEWAY, MORGAN PARK AND PHILLIP ISLAND. ALSO RACED AT BATHURST. VIDEOS AVAILABLE FOR ALL CIRCITS. ENGINE LAST FULL REBUILT IN 2

Rainbow Warrior Piece of racing History. Car 1 of 2, 808 coupes built into rx3 by Terry Lewis for IPRA in 90’s. Only surviving race car of the 2. Fresh built 13B Bridgeport using brand new housings. 1 race meeting since rebuilt. Injection Perfection throttle body Haltech Elite 1500 S5 rx7 box with Albins close ratio gear set. Mazda LSD Bond Alloy roll cage 14” globe wheels Well set up race car that is a blast to drive. Body is not perfect but presents well with minor rust in engine bay

De-registered MX5 (MX-5 or Miata) NB SE Turbo (Never Been in an Accident) 76,000km in Chassis, 300km in Engine Since Rebuilt with Forged Internals & Supertech Valvetrain, Factory SE Turbo Full Mods List: - Adaptronic ECU - Mania Intercooler & Radiator - Mania Exhaust - Oil Catch Can & Oil Cooler - Poly Engine Mounts - New HD Clutch - Yellowspeed Coilovers - Yellowspped 6 Pot Calipers with 330mm Rotor & DTC Pads - Full Superpro Bushed Suspension - Extended Lower Ball Joints - Artka 17 x 9 Racin

Original engine, still running strong Always warmed up before driving Only BP 98 260kW @ 16psi MODS Performance COBB Accessport COBB Front Mount Intercooler Tial External Wastegate CorkSport HPFP CST4 Turbo (EWG setup) CorkSport 3” Intake + 3.5” MAP Sensor CorkSport 3.5” Turbo-back Exhaust (with downpipe) CorkSport Boost Control Solenoid CorkSport Oil Catch Can Handling D2 Coilovers Whiteline Sway Bar Kit Whiteline Lower Control Arms Whiteline Engine Mount Hardrace Mount Pack Transmission BL

Targa-Spec Mazda MX-5 | 2.5L Engine Upgrade Road-registered and stage-ready. This MX-5 was built in 2022 specifically for Targa Tasmania, centered around a high-torque engine conversion that eliminates the limitations of the stock powerplant. The Build: 2.5L Performance - Engine: Upgraded Mazda 2.5L swap, professionally tuned for reliability and stage performance. - Suspension: Full Pedders Adjustable coilovers. - Wheels/Tyres: 17x8-inch wheels with Nankang CRS (50% wear). - Capability: Signifi

I'm listing up my 2005 Mazda RX8 - 6 speed manual for a regretful sale. This is a fantastic car for fun tarmac rally, circuit, or just drive it on the road. It is still fully road registered (not club etc) and if desired you could return it back to factory spec. I deliberately kept the build modest so future owners could return things to original, or go wild and continue to build. I would love to keep this car; but the reality is that it sits in the shed all but 7 days a year. I have another R

An original 1973 10A RX‐3 sedan that had been looked after, very nice car to drive with an honest body, this one is ready to enjoy - it’s a street‐friendly rotary package. Originally imported to New Zealand from Japan and then here to Australia 4 years ago by myself. 13b Bridgeport, rx4 block, Ida 48mm, rx7 gearbox 5 speed, Extractors, exhaust upgraded, adjustable front suspension with adjustable camber plates, lowering blocks in the back and an LSD differential. The interior is mainly orig

1990 Series 5 rx7 - Aussie delivered Cams Log booked Original books and history Set up for tarmac sprint 13B turbo Microtech ECU Approx 400 HP Recent compression test available BC coil overs Strut braces Full cage with removable front section Fibre glass vented bonnet Terratrip ( never used it ) Comes with spares Ready to go racing Very fast, very reliable Could be returned to the street if you had the time and some interior pieces Great for someone that wants to get out there and

Mazda rx7 group b No mrte chassis ! Original grp b mechanic Strengeth chassis with new fia approved welded rolcage . Fiberglass bodykit and doors . Polycarbonat windows brons tinted . Alu gastank with certificate . Alu firewall . Alu windtunnel . New bigger radiator. Custom made wheelarches . Custom made rear 6 link . Original grp b 13b pp ported engine with 51 weber and airbox . Grp b dogbox 5 speed 1st gear left rear . Grp b rearaxle Big 4 pot brakes Electric servo steering short ratio . Bil

Price massively reduced... 1979 Mazda 323 rwd 2-door rolling chassis. Last raced in Improved Production in 2022, it is set up with engine mounts for a Mazda BP engine. Would be an easy rotary swap if desired. Motorsport Australia log booked 3J (first raced in 2020). Extensive but lightweight cage built by Craig Wildridge, including bars through to the front strut towers. Double adjustable dampers by Suspension Concepts, with RaceProducts full cambered floating diff (28 spline RX4/S2000 cen

I have for sale or lease, With Out doubt 4 of the best built Mazda Rx8 production race cars available. All cars have had podiums, some have & had lap records with 60+ driver. All Free components have been made to the max. All new components are best of the best incl fluids i.e. Ryan Rotary coils, Radiators PWR or similar. All new cars have bugs & now sorted & now ready to go. All have my fresh Engines, Gearbox, diffs. All are capable of winning a championship and for those who lease a car I’ve

Selling my FC RX7 to make way for the next thing... Mechanical: 13B-REW Conversion, semi bridgeport by 3S Garage Rotors tip clearanced, block studded w/dowel mods Compression tested on 22/12/2025 (R1 psi 115/117/117, R2 psi 120/120/118) PSR G40-900 on Artec Manifold with thermocouples added Turbosmart 50mm wastegate IGN1A coils, Radium rails/1650cc injectors Custom crank trigger ECU controlled electric water pump 3.5" exhaust into twin 3", 3x AES mufflers with ecu controlled exhaust valve All p

Up for sale is our class c scirocco set up for Bathurst . We are building another VW so time to sell our existing car which has been a great little car over the years . 5 starts at the Bathurst 6 hour , and incredibly 5 finishes including 3 x 2nds and 1 x 3rd. Lap times this year were .01 of a second off the lap record for the class. Lots of extras including basically a whole gutted car in parts , engine , gearbox, suspension bits and so on. Running the 85l fuel cell as required with all t

Built in March 79 the car now has a Larry Kogge built 13bbp running a 48ida new Spanish type Weber bought from Weber sales agent in Australia set up for a 13bbp. I bought the engine of a guy who always turned it over and kept it oiled up said to have done just over 1000k's. Larry raced touring cars and new his way around rotaries back in the day to my understanding. looking the intake runners id love to see in this engine some more. Series 1 box I believe and and standard rear end to be honest

Originally built by Gene Cook for Greg Crick. Not eligible for GROUP U but may run as ‘invited’. Being sold as a roller. NO MOTOR OR GEARBOX. The RX4 diff has been replaced with a 9” Ford. I bought the car in 1989 and in 1995, removed the turbo 13b, and replaced it with a 350 Chev.. The car has not run much since due to medical issues. The original moulds and spare original panels go with the car, as well as the original log book. It could be built with a 13b, 13b turbo, or 350 Chev. I did have

Built by Reliance Automotive Services in Canberra to compete in bitumen road rallies using tge highest quality components. Tge build philosophy was to create a vehicle which could be serviced within the allowed time in the rallies. Items such as fuses are not concealed but are mounted visibly for quick access. Internal wiring is also installed to be visible. The suspension was built to have the maximum travel and excellent compliance to cope with all road surfaces from smooth to very rough, wet

VW Polo S2000 Rally car, based off the Skoda S2000 and built by VW racing South Africa. Sadev sequential gearbox and diff. Just had a brand new engine rebuild and just needs to be tuned and run in. Huge amount of spares are available at additional costs. $85000 plus GST