67 items for sale

Mazda BT50, New fully race machined 20B triple rotor, t400 auto with all new internals by Peter Wileman, new Strange Ultra diff, 42 spline axles. New Master cylinders, rotors and pads. New bushed throughout front end. A couple of small things to finish off. Approx. 600 hp on a mild tune with 6lb boost. Plenty left to increase. New tyres. Also a 1986 twin cab Isuzu transporter that the fits into (wide track-2200mm). turbo motor (approx 220hp) and 6 spd o/drive box. Good for 130kph. 3 new axles

Mx5 RACE CAR 1991 NA THIS VERY WELL KNOW RACE CAR IS NOW FOR SALE. 2B LOG BOOKED EVEN THOUGH THE CAR HAS BEEN AROUND FOR A LONG TIME IT IS NOT AN OLD CAR. APART FROM BODY PANELS, VIRTUALLY EVERYTHING HAS BEEN REPLACED AND / OR UPGRADED AS PART OF AN EXTENSIVE MAINTENENCE SCHEDULE. OURRIGHT WINNER OF THE CUE ENDURO SERIES MANY CLASS WINS INCLUDING LAKESIDE, QUEENSLAND RACEWAY, MORGAN PARK AND PHILLIP ISLAND. ALSO RACED AT BATHURST. VIDEOS AVAILABLE FOR ALL CIRCITS. ENGINE LAST FULL REBUILT IN 2

Selling my first project car. Car remains road legal, with engineering certificate to certifier it as a 2 seater. My dad had the car since new, put 250k km on it driving daily Sydney to Newcastle for a few years, i inherited it and began taking it to the track. Car has had ~8 track days around Sydney. Lots of fun and also acts as a spare family car. Selling it as i've upgraded and cant justify so many cars at our house :( Mods include: Down pipe cold air intake stage 2 tune lowered springs fro

Rainbow Warrior Piece of racing History. Car 1 of 2, 808 coupes built into rx3 by Terry Lewis for IPRA in 90’s. Only surviving race car of the 2. Fresh built 13B Bridgeport using brand new housings. 1 race meeting since rebuilt. Injection Perfection throttle body Haltech Elite 1500 S5 rx7 box with Albins close ratio gear set. Mazda LSD Bond Alloy roll cage 14” globe wheels Well set up race car that is a blast to drive. Body is not perfect but presents well with minor rust in engine bay

Original engine, still running strong Always warmed up before driving Only BP 98 260kW @ 16psi MODS Performance COBB Accessport COBB Front Mount Intercooler Tial External Wastegate CorkSport HPFP CST4 Turbo (EWG setup) CorkSport 3” Intake + 3.5” MAP Sensor CorkSport 3.5” Turbo-back Exhaust (with downpipe) CorkSport Boost Control Solenoid CorkSport Oil Catch Can Handling D2 Coilovers Whiteline Sway Bar Kit Whiteline Lower Control Arms Whiteline Engine Mount Hardrace Mount Pack Transmission BL

Targa-Spec Mazda MX-5 | 2.5L Engine Upgrade Road-registered and stage-ready. This MX-5 was built in 2022 specifically for Targa Tasmania, centered around a high-torque engine conversion that eliminates the limitations of the stock powerplant. The Build: 2.5L Performance - Engine: Upgraded Mazda 2.5L swap, professionally tuned for reliability and stage performance. - Suspension: Full Pedders Adjustable coilovers. - Wheels/Tyres: 17x8-inch wheels with Nankang CRS (50% wear). - Capability: Signifi

A versatile MG Midget race car . Have owned for 36 years .Has been repowered with a MGF twin cam to a Quaife 5 speed type nine gearbox full installation kit from frontline engineering UK . Quaife LSD .4 wheel disk brakes pedal box .full cage Motorsport NZ log book . So much more to this car best to call or email for more information .

I'm listing up my 2005 Mazda RX8 - 6 speed manual for a regretful sale. This is a fantastic car for fun tarmac rally, circuit, or just drive it on the road. It is still fully road registered (not club etc) and if desired you could return it back to factory spec. I deliberately kept the build modest so future owners could return things to original, or go wild and continue to build. I would love to keep this car; but the reality is that it sits in the shed all but 7 days a year. I have another R

An original 1973 10A RX‐3 sedan that had been looked after, very nice car to drive with an honest body, this one is ready to enjoy - it’s a street‐friendly rotary package. Originally imported to New Zealand from Japan and then here to Australia 4 years ago by myself. 13b Bridgeport, rx4 block, Ida 48mm, rx7 gearbox 5 speed, Extractors, exhaust upgraded, adjustable front suspension with adjustable camber plates, lowering blocks in the back and an LSD differential. The interior is mainly orig

1990 Series 5 rx7 - Aussie delivered Cams Log booked Original books and history Set up for tarmac sprint 13B turbo Microtech ECU Approx 400 HP Recent compression test available BC coil overs Strut braces Full cage with removable front section Fibre glass vented bonnet Terratrip ( never used it ) Comes with spares Ready to go racing Very fast, very reliable Could be returned to the street if you had the time and some interior pieces Great for someone that wants to get out there and

Mazda rx7 group b No mrte chassis ! Original grp b mechanic Strengeth chassis with new fia approved welded rolcage . Fiberglass bodykit and doors . Polycarbonat windows brons tinted . Alu gastank with certificate . Alu firewall . Alu windtunnel . New bigger radiator. Custom made wheelarches . Custom made rear 6 link . Original grp b 13b pp ported engine with 51 weber and airbox . Grp b dogbox 5 speed 1st gear left rear . Grp b rearaxle Big 4 pot brakes Electric servo steering short ratio . Bil

MG/SINGER SPECIAL – 1950 • Polished alloy with green guards and upholstery • Alloy body on Singer chassis • Retractable seat belts • Rollbar included • MGB 5 bearing crank • Bored out 060" • Good cam • Big valve cylinder head • 4 speed manual gear box • 1 3/4" SUs and extractors • 16" wire wheels with Blockley tyres • Dual master brake cylinders • New VW steering box • Tonneau cover included • Great to drive • Currently on non-transferable club rego • Will be sold as is. $43500 – or b

Price massively reduced... 1979 Mazda 323 rwd 2-door rolling chassis. Last raced in Improved Production in 2022, it is set up with engine mounts for a Mazda BP engine. Would be an easy rotary swap if desired. Motorsport Australia log booked 3J (first raced in 2020). Extensive but lightweight cage built by Craig Wildridge, including bars through to the front strut towers. Double adjustable dampers by Suspension Concepts, with RaceProducts full cambered floating diff (28 spline RX4/S2000 cen

I have for sale or lease, With Out doubt 4 of the best built Mazda Rx8 production race cars available. All cars have had podiums, some have & had lap records with 60+ driver. All Free components have been made to the max. All new components are best of the best incl fluids i.e. Ryan Rotary coils, Radiators PWR or similar. All new cars have bugs & now sorted & now ready to go. All have my fresh Engines, Gearbox, diffs. All are capable of winning a championship and for those who lease a car I’ve

PRICE $45,000 Cafe racer, grand tourer or club competition - your choice. A lot of people would be happy to look this good at seventy! MGA Coupe built by MG Workshops (Melbourne) in the '90s. It is fitted with an 18GB (5) brg engine (1950cc) with a MSX crossflow alloy head and twin 45 DCOE Weber carburettors, gasflowed, large valves, Titan roller rockers, Carillo rods, JE forged piston, custom extractors and side exhaust, 123 distributor, 4-speed all syncro LH overdrive gearbox and Quaife 3.9

Listing my grandfathers 1934 MG F Type Special. Fitted with a Supercharged L type engine with new crank and steel rods. Brand new professional alloy body work all round. Please call Peter Bail on 0419 820 310 with any questions!

Selling my FC RX7 to make way for the next thing... Mechanical: 13B-REW Conversion, semi bridgeport by 3S Garage Rotors tip clearanced, block studded w/dowel mods Compression tested on 22/12/2025 (R1 psi 115/117/117, R2 psi 120/120/118) PSR G40-900 on Artec Manifold with thermocouples added Turbosmart 50mm wastegate IGN1A coils, Radium rails/1650cc injectors Custom crank trigger ECU controlled electric water pump 3.5" exhaust into twin 3", 3x AES mufflers with ecu controlled exhaust valve All p

Built in March 79 the car now has a Larry Kogge built 13bbp running a 48ida new Spanish type Weber bought from Weber sales agent in Australia set up for a 13bbp. I bought the engine of a guy who always turned it over and kept it oiled up said to have done just over 1000k's. Larry raced touring cars and new his way around rotaries back in the day to my understanding. looking the intake runners id love to see in this engine some more. Series 1 box I believe and and standard rear end to be honest

Originally built by Gene Cook for Greg Crick. Not eligible for GROUP U but may run as ‘invited’. Being sold as a roller. NO MOTOR OR GEARBOX. The RX4 diff has been replaced with a 9” Ford. I bought the car in 1989 and in 1995, removed the turbo 13b, and replaced it with a 350 Chev.. The car has not run much since due to medical issues. The original moulds and spare original panels go with the car, as well as the original log book. It could be built with a 13b, 13b turbo, or 350 Chev. I did have

Built by Reliance Automotive Services in Canberra to compete in bitumen road rallies using tge highest quality components. Tge build philosophy was to create a vehicle which could be serviced within the allowed time in the rallies. Items such as fuses are not concealed but are mounted visibly for quick access. Internal wiring is also installed to be visible. The suspension was built to have the maximum travel and excellent compliance to cope with all road surfaces from smooth to very rough, wet