85 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
4
Roll CageLog Book
2001 Mitsubishi Lancer Evolution 7 RS (Evo VII) Log booked as production touring car 3E, fun and low maintenance competitive car Fresh motor that has only done 3 race meetings with a larger baffled sump, tuned, MCA red suspension, Haltech dash, ducted brake cooling, Cams approved Bonds roll cage, additional fuel tank in the boot with a swirl pot and bosh fuel pump and much more.. Will include a 2 sets of spare wheels (evo 7 and evo 8) and some race-day spares
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec
4
Selling my 2.4l stroked evo 6, engine has just been fully rebuilt by Craig at Aurora Speed not a cent spared in the build. Car is currently not running as it needs engine wired up and a tune I’ve just lost interest in the car and need a car more suitable to get around on the daily my loss your gain, the engine build its self was over 20k+ Has brand new Excedy heavy duty clutch (put in with motor) Aftermarket lower rear control arms And plenty of other little added extras I’ve done to
12
Roll CageLog Book
Race and round winner in the Sports Sedan Vic State Race Series last time out, Sports Sedan or Improved Production race car , dry sumped 2.2 litre, fresh engine , Modena 5 speed just freshened , 6 pot and 4 pot calipers , supercar rotors , 3 way shocks , new turbo and exhaust , most of the running gear is one meeting old , Philip Island 1.38s Sandown 1.14s Fast car ready to race , multiple sets of wheels , spare drive shafts and other spares , 420 kw on 28 psi , you will not go faster for the
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in
12
Roll CageLog Book
Group 3E Production touring car....2023 Australian Production Car Championship A1 Class winning car. Just completed 4 from 4 wins at recent Bathurst International. Engine 1 meeting old...comes with comprehensive spares package including panels , long engine , and gearbox. 12 wheels and tyres, new unused AP Rotors, pad sets, springs suspension and driveline parts. Car was completely customed wired at beginning of 2023 season along with new Motec PDM's and Dash at a cost of $40K. New 6 spot AP Ra
16
RegisteredRoll Cage
Ready to race and built for Circuit Racing and Time Attack, this is one of SA's fastest Evos! Or if you're looking for a very tough streetcar, it's fully road registered, and in a couple hours you can swap over to the street parts and drive it every day. You're basically getting 2 cars in one depending on what you want to do with it. It's won SA Time Attack trophies in every event it's ever entered. Fresh built 2.35 Stroker with only 100kms since rebuild. Making 377kw @ 32psi on e85 track tun
9
Roll Cage
Rolling , Caged Evo 8 Shell MA certified fully welded Roll Cage , thru to front towers . Serial 73367 ( 2023 ) All Cross Members , Suspension , Arms , Steering Rack , Column & Wheel , Fuel Tank , etc Wiring Loom Rear Brembo Brakes Sump Guard Mount Fabricated Gearbox under member Carbon Fibre Door Cards , Foot Plates Ralliart rear Stone Shields Carbon Fibre Air Box Spare Rear Hubs Spare rear Suspension Arms
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing
10
Amazing beginner race car! Mitsubishi CE Lancer 1.5L This is very much a regretful sale but life has other plans. The car was originally set up to run nugget nationals in Melbourne but I bought it and shipped it over to SA to use it as a budget regularity car. It has never let me down and has preformed flawlessly. When I bought the car, it had a brand new engine installed, it had been completely stripped of all unnecessary weight ie aircon heater interior anything that will weigh it down. Th
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S
10
Roll CageLog Book
Turn key supersprint car for sale; ready to roll in 2024 Supersprint Series NSW Overview of cars history: Originally a daily drive from new, then sold in 2017 to a father/son project team who commenced a track car conversion spending on upgrades to include a Southbend competition clutch, Volk Ray wheels, Kuhmo semi slick tyres, KW shocks and SPL suspension components, 6 pot Brembos front and 4 pot rear, Borla cat back s/s exhaust, Kinetic inlet manifold and upgrades with Hotchkiss front an
7
RegisteredRoll CageLog Book
2005 ADM Mitsubishi evo 8 AUS DELIVERED EVO 8 This car has been setup for a time attack Clubsprint class. Still street registered. Car is capable of doing 1.42 at SMSP Very reliable car can do laps upon laps without issues. Always maintained well serviced regularly. Car has approx 135xxx km Engine Fairly stock with basic mods. Tuned on E85 230-250 KW ATW 98 @200KW Tomei titanium exhaust Hyper tune manifold Evo9 turbo 255 fuel pump 1000cc injectors Intake kit Turbo smart actuator
10
Roll Cage
Great little track/hillclimb car. Fitted with 1.8 turbo and AWD, sticks like glue. CAMS cage, surge tank and Bosch 044 pump setup in the boot. New windscreen to be fitted on sale for new owner, can assist with transport either in the state or interstate. Little use snce purchased 4 years ago. Sad to see it go, loss of job forces sale. Happy to answer any questions.