SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

102 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

3
Roll Cage
Log Book
1984 Nissan Bluebird 910 for sale. Located in Adelaide. Car is built as Club rally Car - needs finishing off. Approved roll cage and MA Log Book (PRC). L20B 2 litre motor with 2x Webers, 76 degree cam, alloy radiator. Rear end R30. Complete car $10-15 K depending on what comes with it, or car without engine and gearbox $ 5K.

Hindmarsh SA, Australia
Share
Watch
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U

Narellan NSW, Australia
Share
Watch
10 1
Roll Cage
For Sale - Price reduced and is negotiable - Production Sports Car MX5 NB8A track day special. This naturally aspirated 1.8L DOHC engine has never let me down. This car was built by Automotive Plus, and due to its unique sound down the straight has been a head turner at SE Qld race tracks An extensive list of items are below: BC BR Coil overs - adjustable dampers, adjustable ride height BBS RG359 RG-F Wheels, 15x7 wrapped in Hancook Ventus C51, medium compound twin groove slicks. 205/50Z

Caboolture South QLD, Australia
Share
Watch
1
Roll Cage
Log Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.

Wheeo NSW, Australia
Share
Watch
9
Registered
Roll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo

Sydney NSW, Australia
Share
Watch
5
Roll Cage
Log Book
V8 SuperUte for sale. Cars in great condition, few new things over the season break. - rebuilt engine by wall speed. Brand new heads, locked and sealed within series restriction - new diff centre - Brand new clutch - New axles Cars all fresh and ready for the season ahead. Only selling due to financial reasons. Will come with a list of spares such as new radiator, up rights etc. More then happy to get you into contact with the team at SuperUtes to sort you out in getting started. Pl

Narangba QLD, Australia
Share
Watch
7
Roll Cage
Log Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car

Glenwood NSW, Australia
Share
Watch
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Braeside VIC 3195, Australia
Share
Watch
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.

Launceston TAS, Australia
Share
Watch
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing

Marrickville NSW, Australia
Share
Watch
19
Registered
Roll Cage
Log Book
NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca

Gleneagle QLD, Australia
Share
Watch
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do

North Lakes QLD, Australia
Share
Watch
10
Roll Cage
Rx8 with a honda k24a3 engine and tremec tr6060 gearbox. -honda k24a3 engine, bc double valve springs and retainers, 40 degree intake cam gear, k20 type r oil pump kit -custom engine mounts, gearbox cross member and diff mounts -custom steam pipe manifold, aeroflow gtx3071r turbo, 44mm wastgate, full 3 inch stainless exhaust -custom intake manifold, intercooler piping, catch can and other extensive fabrication -600x300 intercooler, alloy radiator, oil cooler -surge tank, walbro 460lph fuel pump

Gosnells WA, Australia
Share
Watch
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S

Adelaide SA, Australia
Share
Watch
10
Nissan pulsar N15 SSS. The original plan was a 24 hours of lemons car but that didn't happen so down the rabbit hole we went and replaced everything. Fully reco SR20 by hoppers heads, new bearings, rings, and all seals in the head. NEW. Extractors. Remote oil filter. Large alloy Radiator. Radiator fan. Front end joints. Front and rear suspension. Exhaust. Rear brake callipers. Winmax Racing brake pads. Rear sway bar. Bridgestone potenza RE003. Bond bolt in cage. 6 point harness. Fire extin

Werribee VIC, Australia
Share
Watch
10
Roll Cage
Log Book
Turn key supersprint car for sale; ready to roll in 2024 Supersprint Series NSW Overview of cars history: Originally a daily drive from new, then sold in 2017 to a father/son project team who commenced a track car conversion spending on upgrades to include a Southbend competition clutch, Volk Ray wheels, Kuhmo semi slick tyres, KW shocks and SPL suspension components, 6 pot Brembos front and 4 pot rear, Borla cat back s/s exhaust, Kinetic inlet manifold and upgrades with Hotchkiss front an

Colebee NSW, Australia
Share
Watch
7
Roll Cage
For Sale, 1999 Nb Mx5. Sprints, Track Days, Hill Climbs, Motokahana, Time Attack Build ready to race. This car was built for doing Sprints and Hill climbs so any form of Track days and so on this car is built ready to go. Due to where we live there is no "close" Track so like all good ideas its just feesable to own up here any more. Our loss is your gain. 1999 NB Mazda Mx5 Short version of the build Supercharged 1.8l 4cyl Haltech Elite 1500 Haltech IC7 Dash Tuned on E85 Bigger Throttle Bo

Rockhampton QLD, Australia
Share
Watch
5
Registered
V8 Mazda Maxi Campervan S.A registered Holden 308 Possibly one of a kind Street registered with a Holden 308 turbo pattern engine. T400 three speed automatic transmission fully rebuilt with small stall Holley 600 fully rebuilt Custom exhaust Commodore rear end with welded diff Trans cooler and second radiator on bull bar Disk brakes all round The body is in fair condition and has been patched up and sprayed with a spray can Deck it out for a great Campervan Tow car for go carts Or remov

Adelaide SA, Australia
Share
Watch
14
Was $79,950$76,500
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Bendigo Victoria, Australia
Share
Watch
10 1
Registered
Log Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1

Menai NSW, Australia
Share
Watch