480 items for sale

2012 Radical SR3 RS Chassis number: SR3-00686 AIM smartycam system Pit radio system High-downforce double adjustable carbon rear bi-plane wing Paddle shift kit Plumbed fire extinguisher Air jack system and lance 1x set wet weather tyres 2x sets slicks Purpose-built car cover Low engine time 1500cc RPE Engine Paddle-Shift with Auto-Blipper Dry Sump Oiling System 280mm Oversized Floating Front and Rear Brakes Intrax Triple Adjustable Shocks Quaife Differential Gear drive unit AIM Sports MXL Dashb

Wanting to buy 1x RECARO 'Profi-A' seat as pictured with exposed back. Please contact me if you have anything available.

NEW 2026 HNS 4.8m Enclosed Dual axle Internal floor length is 4.75m trailer external full width is 2495mm width between mudguards is 2005mm drawbar length is 1.5m internal height is 2.2m GVM 3500kg Tare 1550kg Chassis and drawbar at 150mm x 50mm x 5mm X 450gr RHS duragal Steel 4mm Automotive spec Aluminum Cladding walls, high gloss white (flexible core) 1pc fiberglass FRP roof LED autolamps tail lights and clearance lights throughout the entire trailer load sharing greaseable suspension ( 4200

NEW 2026 HNS 6.5m Enclosed Tri axle Internal floor length is 6.45m trailer external full width is 2495mm width between mudguards is 2005mm drawbar length is 1.5m internal height is 2.2m GVM 4500kg Tare 2050kg Chassis and drawbar at 150mm x 50mm x 5mm X 450gr RHS duragal Steel 4mm Automotive spec Aluminum Cladding walls, high gloss white (flexible core) 1pc fiberglass FRP roof LED autolamps brand tail lights and clearance lights throughout the entire trailer load sharing greaseable suspension

2007. 997 GT3 Very honest car,has had very little use in the last 5 years Motor and driveline ran and warmed up on a regular timetable. Great car for sprints, motor and hollinger sequential on low hours Cams log booked

For Sale: Nissan S14 200SX – E85, Track-Prepared but can also be registered! A well-maintained and thoughtfully upgraded Nissan S14 200SX, recently freshly tuned on E85. This car has been assembled with a focus on balanced performance, reliability, and handling, making it ideal for track use or as a capable street/club car. Clear PPSR and car can be registered. See modifications below. Engine & Fuel System • Nistune ECU tuned for E85 (Tuned by DrDrift 200kw) • Garret S15 turbocharger on afterma

Powered by 1300 hayabusa injected 3 sets of wheels incl wets.full set of suspension,chain,sprockets,nose cone with wing.Including enclosed trailer. Car is brand new only tested and set up.

Formula Vee Elfin NG historic COD fresh engine and gearbox, refurbished body and refurbished enclosed trailer, everything in the photos and more will be included just to list some Spare refurbished rims and 80% tyres Alignment bars Stands Quick lift jack Easy up, chair, table Dorian timer Jump battery and Leeds Spare axles and tubes New spare nose cone( will be sold painted) Lubricant’s Assorted spare parts and tools Jerry can Trailer has new winch and solar panel to charge trailer battery

PRICE REDUCED now $45,000 MGA Coupe built by MG Workshops (Melbourne) in the '90s. It is fitted with an 18GB (5) brg engine (1950cc) with a MSX crossflow alloy head and twin 45 DCOE Weber carburettors, gasflowed, large valves, Titan roller rockers, Carillo rods, JE forged piston, custom extractors and side exhaust, 123 distributor, 4-speed all syncro LH overdrive gearbox and Quaife 3.9 differential. Front ventilated disc brakes with 4 pot calipers, rear disc brakes and in-cabin bias control val

This Classic Rally Car was built by Escort guru Ian Hill from a rust and crash free shell, with all fabrication done to Homologation papers. Car is presented ready to rally, having only done just two rallies. Those being 2022 Alpine and 2024 Ada River for total 578 stage km’s from new. Engine: New Jennings BDG 2 litre alloy block with nicasil bores, Jennings head studs, 11.9:1 CP forged pistons and rings, Carrillo H-beam rods fitted with Indy car bolts. 12 bolt steel crank with narrow journals

MES2 completed in the Australian V8 Supercar Series between the years of 1998 and 2001 in 20 races including Bathurst, Sandown, Indy and the Adelaide 500 It was campaigned by Tomas Mezera and co-drivers: Terry Finnigan, Alain Menu (two time British Touring Car Champion) and Tony Ricciardello In 1999 the car was leased by Gibson Motorsport and raced by Steve Richards at the Albert Park Grand Prix in the #7 VT Wynn’s livery The car is presented today in the black & white Densitron Livery, has a

I have a bunch of Cup Car Parts for sale as follows. • 2 sets of 997.2 Forged factory 1-piece rims $4000 per set • 1 set 0f 997.2 BBS 3-piece rims $3500 • 2 sets 997.1 rims with wider rear inner section to run 997.2 tyre $2500 per set. • 1 x 997.1 LH factory Cup Door $3000• • 997 Cup Brypar – New front and rear disc rotors (no Hats) $2000 • 997.1 Rear BBS rim $700 • 997.1 BBS front and rear outer rims $300 each • 997 Cup Hollinger Gearbox $25,000 • 997 3.9L Cup Car Engine – hear in car running w

Ford Fiesta 2004/5 modle, We use this for rally car racing at Keyton and circuit racing, we run the same set up, just change the tyres. It comes with a full new set of road tyres Michelin 205/50/16. Plus 1 spare L / R rally rim and tyre. It has 2 race seats with a bolt in roll cage. Good reliable car. May need a new battery. Paint and sticker strips an old, car has been we used. Price is the price. Call Darren 0417470195

I have my VF Holden Caprice has done 92,XXX ks car is almost brand new and in immaculate inside and out side is in great condition aswell few stone chips at front other then that nothing major (can be fixed for right sale price) i have spent upwards of 95k on build so far, and have only had the car for 2000ks since finishing the build, a great solid set up as follows: PARTS: - 227 224 , 114 lsa boost bald eagle cam shaft texas speed - Pac valve springs with locks retainers and valve steam seal

Z28 Camaro Sports Sedan built to TA1 Spec. R5 Dodge Engine 6 Speed Modena Sequential Full throttle upshift AP Calipers and Rotors Cabin Adjustable F/R Anti Roll Bars Motec ADL2 Dash with Shock data, Lateral G’s, GPS track map, Brake pressures, Steering angle and engine data. Set up equipment + spares included Spares Carburettors Brake Pads and Rotors Longacre Scales + Platforms Wheel Alignment Frames Engine Gaskets Radiators Body Panels Fully dressed spare engine can be included for extra.

Forged aluminium wheels: Chev/ Holden CCW forged/ machined monoblock 18” road/race wheels, extremely strong and light; Chev / Holden 5 stud x120.65mm/ 4.75 inch : two 18”x13”width, and three 18”x12” width; +45 mm offset front and rear. New, never used/ fitted. These cost $1000 USD per wheel from factory. Intended for Corvette race car> unfinished project. Will fit many other cars.

Built in March 79 the car now has a Larry Kogge built 13bbp running a 48ida new Spanish type Weber bought from Weber sales agent in Australia set up for a 13bbp. I bought the engine of a guy who always turned it over and kept it oiled up said to have done just over 1000k's. Larry raced touring cars and new his way around rotaries back in the day to my understanding. looking the intake runners id love to see in this engine some more. Series 1 box I believe and and standard rear end to be honest

Brand new Varta A5 Start/Stop AGM Battery (G14) purchased from Every Battery Ashburton on 4 Nov 2025. It has been used for about 2 weeks before we discovered we needed a larger 105Ah battery for our vehicle. The battery is basically brand new but I cannot exchange it at the battery store so I am looking to sell it for a large discount. Originally purchased for $559.95 (receipt in second photo), and it is in warranty with the receipt which can be provided. Selling for $159.95 less than retail p

Brand New 2020 Manufactured Supashock Coilover Suspension Shocks to suit Hyundai Excel These were the last type available before the introduction of the controlled shock package for Circuit Excel They have been bolted onto a car but have never been used

Tickford built V8 Supercar engine from Gen2 mustang. Purchased in 2024 but no longer require for project. Complete with wiring loom, alternator. Approx 2800klm’s life on engine ( as sold to me )