363 items with Roll Cage for sale

Reduced from $175,000, now down to $150,000 As raced by Craig Scutella at Bathurst 6 hour. New HCC engine (2 races only) Brand new Holinger gearbox and Tilton clutch, Zero hours on both. Diff one race old. All recent updates performed, engine oil cooler relocation, new and relocated gearbox cooler, radios, HD vbox, huge inventory of parts. Rims, shocks, springs, gear sets etc. Please ring to discuss spare parts plus any setup and track support if required.

MY17 Porsche 911 991.2 GT3 Cup Car, originally delivered and raced in Porsche Carrera Cup Asia season in 2018. Imported into Australia in 2021 and debuted in the 2022 Porsche Michelin Sprint Challenge season with Ryan Wood as the Team Porsche New Zealand x Earl Bamber Motorsport Scholarship car. The car received a new chassis and engine for the start of the 2024 season and has since covered 6668km / 43 hours. The gearbox underwent a major service at Holinger in June 2025 and has since covered 1

Just finished a ground up referb including panel & paint outside, inside & underneath. Price also includes a comprehensive Spares Package valued at over $10,000. ENGINE SPEC’s: Engine completely refreshed by Blaze Performance. Block- Sunnen CK21 Torque plate honed and plateau finished Callies Magnum XL Crankshaft cleaned, polished & crack tested Callies Ultra ɪ Beam 6” Rods cleaner & crack tested JE Custom Forged Pistons sonic cleaned to remove carbon from gas ports New Total Seal Rings File

PRICE UPDATE: Now $33k Ready to race, sprint or hillclimb with a dual axle trailer! Sadly, it is time to sell my beautiful Mallock Mk31 clubman sports racer as my time circuit racing has come to an end. This is an English car built in the Mallock factory and is chassis No.1. It was completed shortly after Arthur Mallocks’ passing and was the first car by Mallock to be CAD. The car comes with a dual axle custom made trailer and many spares. It has a fully documented log book and has had a long

1992 Daihatsu Charade Ultra racing supports top and bottom of rear struts & top of front struts and fender braces New Haltech Elite 750 ECU cost $7400 Adjustable coil overs front & rear 4-wheel disc brakes CAMS approved roll cage built by Scott's Rods 1300cc 16 valve EFI Daihatsu engine Quick release steering wheel Braded brake lines Federal 595RS-R tyres Window net Sparco race seats x 2 5 x 15-inch wheels 4 x steel 13-inch wheels SPARE PARTS AT EXTRA COST $1500 2 X Daihatsu complete cars 1 x p

TOYOTA 86 Scholarship Series Car Currently specced for the 2026 series! Coilovers near new, only being replaced half way through last years season (used 3 rounds) BRAND NEW Engine, been professionally put in by P&K Racepreps (used 1 round) 1 set of spare wheels Race Log Book Complete

Offered for sale is this striking 1970 Fiat 124BC Coupe, purpose-built for motorsport and with a considerable history across multiple grassroots and competitive disciplines. This lightweight, stripped-out example has been actively campaigned in hill climbs, timed sprints, motorkhana, and more recently in social GEAR events at Lakeside, Queensland Raceway, and Morgan Park. It has also travelled interstate to compete at Fiat Nationals, most recently at The Bend Motorsport Park in South Australia.

Ready to race Mk1 Group NC 1600 BDA fully built with all the good bits. I only used as a track car so has not been raced for a few years. Last owner competed in NC races. Great car nothing to do apart from std race maintenance as usual. Log Booked Can be seen in Somerville.

SOLD-IPRA 2002 V2 Monaro VIC #21-SOLD We have recently retired and are setting off on the Big Lap. It is sadly now time to let go of my IPRA V2 Monaro that I have owned since 2012 and bought as a road car. The V2 Monaro has been built up over many years and a large amount of time and effort has been put into the Monaro to bring it to where it is today. Under the guidance of Maverick Performance I have sourced the best components and motorsport engineers and fabricators. https://www.facebook.

bmw 316i sports sedan log booked has a rover 3.5 v8 motor meany up grades was built but only used at club events due to ill health fun car to drive needs a good home cheap to run

Up for sale is our Holden HQ Monaro 2 door. It runs as a Group NC Historic touring car. Multiple wins, podiums and pole positions. Highly adjustable and has all the good bits. Those who know the car, know its fast. Strong and reliable 350 chev, coupled with a 4 speed muncie gearbox. The cost to build these cars is enormous, so get yourself a front running car without the price tag of a new build. Truck is available at an additional cost. Price on application.

99 Hyundai Excel gravel rally car Well maintained and presented Excel gravel rally car, selling due to upgrading cars, has been a fast and reliable car. Very capable car for an Excel. A lot of the work completed to this car had been done at the start of 2025 season, and completed 3 rallies since. Current cams logbooked car Seat belts in date 99 model Twin cam engine Custom airbox Fuel regulator White line front strut brace Solid engine mounts New gearbox shift bushes Misch’s short shifte

Vehicle is now 3C log booked (Tarmac Rally) AND has a fully built Precision Racing 1400hp engine! Recently posted a 51.8 second Queensland Raceway Sprint Lap Time. Want to get into something that you will never forget, set some records, take home some 1st place trophies, and even drive it on the road back home afterwards? Then this R35 GTR is the Ultimate Weapon for you. The sheer a mount of work and development on this car has put it in the minds of many by setting records all over the place,

OPEN TO REASONABLE OFFERS MAY TRADE FOR SOMETHING OF INTEREST UP TO 50K VALUE + CASH Selling my VX Commodore race car. It was built for Replica Tourers but is also suitable for QTCC, Sports sedans, Vic V8’s and other local classes. Car specs: L98 6 Litre Race Engine built by Fataz competion Engines - Only the best parts were used. It made a genuine 500+ rwhp on roller/chasis dyno at 7200rpm on 98 fuel, not inflated figures like some other cars post. Engine built at 10.5:1 compression for reli

ford Mustang GT Mach 1 built by Ryan Mcloed was on pole for 2022 Bathurst 6hr it has 4 camera system Sparco seat on Ricaro adjustable slide 100 ltr premier fuel cell FAI approved Brembo billet brakes 378 Brembo rotor modified rear brake calipers with floating rotor Murray Cootes Gold shocks big range of eibach springs included new Mach 1 spec engine with boundary oil pump Mahle pistons Manley rods psi valve springs epoc multi angle valve job ATI balancer dynoed by roger Higgins new Suncoast 10

BMW F80 M3 production race car, ready to run in production racing, Bathurst 6 hours or new Production classes in Australia. Price just reduced from $135,000 to $125,000 Completed Bathurst 6 Hour 2025, ran a 2.24 still running air conditioning and a lot of extra weight still to be removed from car, led the race towards the end of the first hour (see photo car 154), came 2nd overall in Winton 300 in 2025 and won the class, car details are below, also available a complete spares package as noted

Genuine original BrUte. As raced. SRT built. Unmolested and unused. Garaged last 15 years. Started frequently. Will require fresh tyres and harness to be race ready again. A fast fun fabulous car to drive. May trade a good gravel rally car. Contact Rob Mortimer.

2022 Ford Mustang Originally raced by Owen Kelly until mid 2023 Recently competed in the 2025 TA2 Championship finishing 5th in the championship Professionally maintained between each event with a brand new engine fitted 4 race meetings ago and a very large spares package included in the sale. Ap clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded rear uni, Rebuilt G Force Gearbox, 22 springs (225lb - 550lb), 10 sets of drop gears, Spare Engine, Used

Replica Penske Race car Group N logbook Freshly built & painted car having only completed 1 Race meet at QR finishing 2nd Brand new muncie gearbox with gearbox pump & cooler PWR radiator Racing Tri Y exhaust Ceramic Coated double adjustable Afco Shocks Howe Ball joints & tie rod ends 2 sets of wheels Aluminium fuel tank New Harness New seat selling less engine