274 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
4
Roll CageLog Book
ESCORT Group 4 ex works Ford Australia car - INB 115 plate registered ex Colin Bond/Bob Riley/Greg Carr/Dick Johnson/Ian Hill/John Berne, one of 4 works detached cars built for the Australian Rally championship during 1976 - 1979 under contract to Colin Bond (Ford Australia) , also driven in select events ie Southern Cross International Rally , Alpine and Castrol International rallies. This car is original body shell and only one of two original cars remaining in existence. Safety equipment, eng
15
RegisteredLog Book
2006 white subaru forrester STI, 6speed manual, 2.5L 4 cylinder turbo 118,000KM, Rego till January 7th 2025, New tyres, 3inch catback exhaust, Aftermarket Pioneer audio system, New Sparkplugs, airflow meter,Headlights, Mechanically A1, Some rim scratches, Selling for house deposit/ wanting a van
14
Registered
I’ve bought another car now so keen to move this on quickly. Backstory : I had intended to go large turbo with this build, hence the built forged bottom end, but a business opportunity and a new car has had me consider a change of direction to free up some cash. Baseline car I’ve owned since new from Brisbane Audi and is fully optioned. Engine & gearbox : Brand New built/forged motor. Under 2000klms on the engine. Run in done and ready to go for the next person. ItalianRP forged Rod
8
Hi. Putting this ad up on behalf of my partner. Has to be gone asap so BEST OFFER GETS IT!! Rare as rare 1968 model Datsun 1600 (P510) with the inward wiping windscreen wipers that set them obviously apart from all the rest. This 68 Datto 1600 looks to be one of the first of the first with a very low build number on VIN. Still has both original matching compliance plates This thing WAS completely original when I found it nearly 30 years ago. It's been locked in my garage ever since. Body was s
17
This is a one off 1963 USAC (UNITED STATES AUTOMOBILE CLUB) National Midget Championship winner. The driver was Bob Wente who was a visitor to Australian speedcar racing in the sixties. He was inducted into the USAC Hall of Fame in 2014 & still has the 3rd greatest Midget race record in US Midget racing history. This car is the last example of the famous Kurtis Kraft/Offenhauser design built by John Pawl , who bought out the Kurtis Kraft Midget business in the late 1950's. This car was deli
20
Registered
A rare opportunity to obtain an exceptionally rare, one owner BMW 335i M-Sport 6 speed Manual. Built late 2013 and first registered 2014, this 3 litre, twin turbo performance car is in superb condition and comes with complete service history and all books. This 335i M Sport has been my daily drive and has travelled only 113k km but is now surplus to requirements. It is finished in Mineral White metallic with black leather and Anthracite interior. The stunning looking wheels are 19" black fact
13
Registered
2018 Subaru BRZ TS 45,XXX KMS Ideal Street and Track Car, built with supreme reliabilty and performance! Engine Modifcations: -Invidia N1 Cat Back Exhaust -Tomei Equal Length Headers with Over Pipe -Zeitronix Flex Fuel -Cosworth Inlet Hose -Perrin CAI -EcuTek Race-Rom Tuned By S&J Automotive Suspension & Brakes: -Upgraded STI Brembo Brakes to Spec R STI 6 Pot Front Calipers with Endless PC35 Pads/DBA T3 Discs -MCA Street Series Coilovers -Whiteline Rear Sway Bar -Whiteline Gearbox Mount B
10
Please read this advert completely before ringing so you know what this is. This is a 2008 BMW M3 in fantastic condition, it is an English import by the previous owner, who imported the car but without an import approval. As such he was given 3 options by the department of infrastructure, re-export the car, have it crushed, or import it as a race car. As the owner did not have a race car licence, he sold it to me and I imported it as a race car – the vehicle has NEVER been on a race track (YET).
20
Log Book
1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.
10
Roll Cage
Rx8 with a honda k24a3 engine and tremec tr6060 gearbox. -honda k24a3 engine, bc double valve springs and retainers, 40 degree intake cam gear, k20 type r oil pump kit -custom engine mounts, gearbox cross member and diff mounts -custom steam pipe manifold, aeroflow gtx3071r turbo, 44mm wastgate, full 3 inch stainless exhaust -custom intake manifold, intercooler piping, catch can and other extensive fabrication -600x300 intercooler, alloy radiator, oil cooler -surge tank, walbro 460lph fuel pump
20
Registered
Mercedes cla 250 sport 4 matic i track vehicle. No expenses spared. KW Clubsport suspension Hardrace suspension links Hardrace lower control arms Wanger intercooler Carbon fiber parts APR rear wing Trackspec bonnet vents HG motor sport Cold air intake Rennt carbon strut bar Armytrix decatted down pipe Front recaro seats Front 6 point harness Full forged motor( invoice supplied) Garrett performance turbo Transmission cooler aftermarket Motec C125 dash disp
8 1
For sale is a pristine 2017 Mercedes-Benz AMG C63s Coupe, boasting a modest 65,868kms on the odometer. This model features the elegant Dimond White exterior, complemented by the complete "Edition 1" Full interior. Recently fitted forged AMG wheels and brand new Nankang AR1 Semi Slicks (Cost me $5500) Regrettably, due to water exposure in NSW, the vehicle has been declared as a statutory write-off and, therefore, cannot be registered in Australia. Despite its pristine condition with no history o
31
Registered
• Built from a very rust free CK44 rolling shell. Only rear wells and heater bubble replaced. Steel Mexico front wing flares added. • Bare metal shell repainted. • Rebuilt and upgraded 1600cc GT OHV engine built by Trevor Hines. • Significant number of new or NOS parts used including:- radiator, starter motor, alternator, head lining, 9” rear brakes, Mk2 front suspension, M16 calipers, all new bearings and bushes, tca’s, carpet, laminated windscreen, clutch, battery, new tyres. • Genuine UK made
10
Roll CageLog Book
Turn key supersprint car for sale; ready to roll in 2024 Supersprint Series NSW Overview of cars history: Originally a daily drive from new, then sold in 2017 to a father/son project team who commenced a track car conversion spending on upgrades to include a Southbend competition clutch, Volk Ray wheels, Kuhmo semi slick tyres, KW shocks and SPL suspension components, 6 pot Brembos front and 4 pot rear, Borla cat back s/s exhaust, Kinetic inlet manifold and upgrades with Hotchkiss front an
4
Registered
Very low 42,000 km's and highly maintained. There is a lot of value packed in this superb car. Includes Sprintex Stage 2 - SPS Supercharger system & AP Racing Radical brakes. Licensed in WA.
8
Log Book
Professionally Australian built with American know-how. Motor is a fully worked big block Chrysler (253 cube) 3 speed gearbox, with USA quick change diff. Has triple Rotchester cars and an all alloy body. The tyres are racing 600x16 Dunlops, done 20hrs. The car itself had never been damaged and is well looked after. Last 8 years competed in regularity events in Perth. It is currently CAMS log booked. Owner is member of VSCC WA. Car garaged in Perth metro. This unique one of sprinter is modelled
14
Up for sale is our Corolla KE70, aka Nana-Spec, project car 4A-GE motor (originally out of MR2) ECU and wiring is completed Motor runs (needs the return fuel line back to the tank to be plumbed up) Hydraulic clutch installed, needs to be bled Surge tank and pump installed New exhaust system Original paintwork and interior Minor rust in lower rear outer quarter panel and front edge of bonnet, and small amount of panel work required Clean chassis and underneath Selling due to not having enough
12
Project car regrettably up for sale 4AGE-ZE motor with LA3 mod plate Cast iron Celica 5-speed gearbox Shortened Hilux diff 15” Simmons wheels Front mounted intercooler behind bar Very clean underneath, no rust in chassis Interior mostly complete, missing a couple of mouldings in boot area Exterior in good condition, a couple of small rust spots, nothing major Motor not currently running Will require ECU and partial rewire Selling due to not having enough time - have had the car for 8 years
11 1
It's time for my Humber Speedster project to be passed along to someone who can finish it. I had always wanted a pre-1920’s Speedster but as they don’t suit the highway driving of today I decided to make one from a car that could. The donor car was a ’32 Humber rolling Chassis. All the hard work has been done, and 99% of the materials and components purchased. I have chronicled the build in photographs and a blog, plus starting the engine for the first time on a video. When going through the par
6
RegisteredRoll Cage
1962 MORRIS MINI 850 FITTED WITH FUEL INJECTED YAMAHA R1 AND QUAIFE LSD HALTECH ECU FIBREGLASS LIFT OFF FRONT HALF ROLLCAGE VENTILATED ROTORS WITH 4 SPOT CALIPERS FRONT COILOVERS 2 FUEL TANKS HIGH AND LOW PRESSURE FUEL PUMPS 3 PIECE ALLOY WHEELS FITTED WITH HOOSIER TYRES 2 RACE SEATS 2X 5 POINT HARNESS NSW ENGINEERING PAPERS WAS REGISTERED IN NSW CURRENTLY REGISTERED IN QUEENSLAND