293 SEAT for sale

This is is an exceptional built race car. It was built in SA during 2006 and logged booked with CAMS in 2007 as an Improved Production 3J race car. It also comes with its own hydraulic break back trailer. Exceptionally fast car 2.30 @ Bathurst. Car has Brembo brakes front and rear, wheels are off a Skyline, 4 on the car and 2 spares with brand new tyres on them. 5 speed transmission, modified air induction air system, great body no rust and very good paint on the body. CAMS approved roll cage f

1996 WRX Log Booked Race Car new motor from subaru STI worked heads, large sump GFE .Motor would be lucky if its done 15 hours Autronic EVL,LDI Ignition ,watre sprayers boost regulator and surge tank 4 pot brakes, braided lines,Race Pads 6 point roll cage cams aproved,Race tech seat ,6 point harness and log booked 17" slicks with 2 spares PAR gearbox Ajustable coilovers,cusco shocks and ajustable white line sway bar fresh profestional paint job ready for sponser decals

MY23 Porsche 992 GT3 Cup Car, delivered new to Porsche Carrera Cup Australia for the 2024 season. The car has been meticulously maintained by Earl Bamber Motorsport since its arrival in Australia. The car received a new chassis in October 2025 and has since only covered 15km at a shakedown event. The engine and gearbox have covered 44.5 hours / 7020 km since new. The car comes with a full life schedule from delivery. Expiration dates: - Belts end 2028, - Seat end 2031, - Window nets end 2028

Hyundai Excel race car, fully MSA log booked and ready to race. For sale with full Collie, Carco and Bathurst set up data. String line equipment included. This is a well set up car that has benefited from years of development. Front running car with good pedigree. Could be sold with or without engine and gearbox if buyer prefers. - National level AGI cage - Current Supashocks - Sealed engine and gearbox - Fuel pressure regulator - NACA cooling duct - Brake balance adjuster - Quick release steer

Hi, I am looking for a front bumper complete for a Mark 1 997 cup car as pictured. Also chasing other items as listed. Tail lamps Rear bumper Brake discs Lower steering column panel Passenger seat setup with belts Jack stands to suit air jacks

MY17 Porsche 911 991.2 GT3 Cup Car, originally delivered and raced in Porsche Carrera Cup Asia season in 2018. Imported into Australia in 2021 and debuted in the 2022 Porsche Michelin Sprint Challenge season with Ryan Wood as the Team Porsche New Zealand x Earl Bamber Motorsport Scholarship car. The car received a new chassis and engine for the start of the 2024 season and has since covered 6668km / 43 hours. The gearbox underwent a major service at Holinger in June 2025 and has since covered 1

PRICE REDUCED FOR QUICK SALE Completely Rebuilt as one of the most unique Naked Cafe Racer out there. see video to get understanding of the build. Also see website from the builder: https://purposebuiltmoto.com/blogs/gallery/ducati-gt1000-sport-classic-signature-series Bike currently located in Sydney (currently on old QLD rego expired April 2026) - happy to assist in arranging transportation for interstate buyers. Mileage on bike since build : 3,300 kms PRICED FOR QUICK SALE - from Exclu

Mercedes 519 sprinter. 3.0 turbo Diesel automatic. (Not available anymore) long wheel base, high roof. Fully set up with rear seat, solar, custom draws, rear shelf, fridge, 3500kg towing capacity, Captain suspension seats, These vans are the best. Now only available with the 2.0lt engine. They are very powerful and capable to tow 3500kg. Only done 61,000 kms and in excellent condition. Contact me with your number and I’ll call you back.

Offered for sale is this striking 1970 Fiat 124BC Coupe, purpose-built for motorsport and with a considerable history across multiple grassroots and competitive disciplines. This lightweight, stripped-out example has been actively campaigned in hill climbs, timed sprints, motorkhana, and more recently in social GEAR events at Lakeside, Queensland Raceway, and Morgan Park. It has also travelled interstate to compete at Fiat Nationals, most recently at The Bend Motorsport Park in South Australia.

SOLD-IPRA 2002 V2 Monaro VIC #21-SOLD We have recently retired and are setting off on the Big Lap. It is sadly now time to let go of my IPRA V2 Monaro that I have owned since 2012 and bought as a road car. The V2 Monaro has been built up over many years and a large amount of time and effort has been put into the Monaro to bring it to where it is today. Under the guidance of Maverick Performance I have sourced the best components and motorsport engineers and fabricators. https://www.facebook.

A fun daily driver registered in Qld. I have owned this collectors car since 2010. It has been upgraded in ALL areas to be a reliable track day car in time attack format, while being fun to drive on the street. Quality upgrades by competent workshops have been made to engine, clutch, gear box, suspension and brakes. Many minor upgrades like exhaust gas thermometer EGT and boost guage mounted on A pillar. Cruise control, upgraded seat covers as original worn out. It was my daily driver until reti

99 Hyundai Excel gravel rally car Well maintained and presented Excel gravel rally car, selling due to upgrading cars, has been a fast and reliable car. Very capable car for an Excel. A lot of the work completed to this car had been done at the start of 2025 season, and completed 3 rallies since. Current cams logbooked car Seat belts in date 99 model Twin cam engine Custom airbox Fuel regulator White line front strut brace Solid engine mounts New gearbox shift bushes Misch’s short shifte

Vehicle is now 3C log booked (Tarmac Rally) AND has a fully built Precision Racing 1400hp engine! Recently posted a 51.8 second Queensland Raceway Sprint Lap Time. Want to get into something that you will never forget, set some records, take home some 1st place trophies, and even drive it on the road back home afterwards? Then this R35 GTR is the Ultimate Weapon for you. The sheer a mount of work and development on this car has put it in the minds of many by setting records all over the place,

OPEN TO REASONABLE OFFERS MAY TRADE FOR SOMETHING OF INTEREST UP TO 50K VALUE + CASH Selling my VX Commodore race car. It was built for Replica Tourers but is also suitable for QTCC, Sports sedans, Vic V8’s and other local classes. Car specs: L98 6 Litre Race Engine built by Fataz competion Engines - Only the best parts were used. It made a genuine 500+ rwhp on roller/chasis dyno at 7200rpm on 98 fuel, not inflated figures like some other cars post. Engine built at 10.5:1 compression for reli

ford Mustang GT Mach 1 built by Ryan Mcloed was on pole for 2022 Bathurst 6hr it has 4 camera system Sparco seat on Ricaro adjustable slide 100 ltr premier fuel cell FAI approved Brembo billet brakes 378 Brembo rotor modified rear brake calipers with floating rotor Murray Cootes Gold shocks big range of eibach springs included new Mach 1 spec engine with boundary oil pump Mahle pistons Manley rods psi valve springs epoc multi angle valve job ATI balancer dynoed by roger Higgins new Suncoast 10

Toyota Used Racing Development Starlet - the TURD. What a machine! Originally built for cheap car enduro racing by the previous owners, I bought it to continue the tradition. Race proven. After I bought it, our team gave it some much needed elbow grease, made a few changes and ran it in the Light Car Club of Canberra 5 hour enduro at Pheasantwood Circuit, Marulan. We placed first in our category and third overall. Not bad for a crew of amateurs. This little champion didn't miss a beat. It's no

BMW F80 M3 production race car, ready to run in production racing, Bathurst 6 hours or new Production classes in Australia. Price just reduced from $135,000 to $125,000 Completed Bathurst 6 Hour 2025, ran a 2.24 still running air conditioning and a lot of extra weight still to be removed from car, led the race towards the end of the first hour (see photo car 154), came 2nd overall in Winton 300 in 2025 and won the class, car details are below, also available a complete spares package as noted

3.6mLx2.0mWx2.0mH external box dimension enclosed trailer • Blasted and powder coated frame • ACM panel cladding (white, silver, gunmetal grey, black) • Propeller plate on front and lower sides • Powder coating of all flashings and trims • Galvanised draw bar and axle • Lift up rear door with gas struts • Side man access door • Lift up side hatch with gas struts • Enclosed tool area in left hand side hatch • Double height kart tyre rack in tool area • Aluminium fabricated and powder coated tool